Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Fracture Characterization of Automotive Alloys in Shear Loading

Journal Article
2015-01-0528
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2015-01-0528
Published April 14, 2015 by SAE International in United States
Fracture Characterization of Automotive Alloys in Shear Loading
Sector:
Citation: Abedini, A., Butcher, C., Anderson, D., Worswick, M. et al., "Fracture Characterization of Automotive Alloys in Shear Loading," SAE Int. J. Mater. Manf. 8(3):774-782, 2015, https://doi.org/10.4271/2015-01-0528.
Language: English

References

  1. Bai , Y. and Wierzbicki , T. , A new model of metal plasticity and fracture with pressure and Lode dependence Int J Plas 24 1071 1096 2008
  2. Bai , Y. and Wierzbicki , T. , Application of extended Mohr-Coulomb criterion to ductile fracture Int J Fract 161 1 20 2010
  3. Montheillet , F. , Cohen , M. , Jonas , J. J. , Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe Acta Metall 32 11 2077 2089 1984
  4. Yoshida , K. , Ishii , A. , Tadano , Y. , Work hardening behavior of polycrystalline aluminum alloy under multiaxial stress paths Int J Plas 53 17 39 2014
  5. Stout , M. G. and O'Rourke , J. A. , Experimental deformation textures of OFE copper and 70:30 brass from wire drawing, compression, and torsion Metal Trans A 20A 125 131 1989
  6. Peirs , J. , Verleysen , P. , Tirry , W. , Rabet , L. , et al. Dynamic shear localization in Ti6Al4V Eng Procedia 10 2342 2347 2011
  7. Iosipescu , N. New accurate procedure for single shear testing of metals J Mater 2 537 566 1967
  8. Rauch , E. F. , Plastic behavior of metals at large strains: experimental studies involving simple shear J Eng Mater Technol 131 1 1 8 2009
  9. Gasperini , M. , Pinna , C. , Swiatnicki , W. , Microstructure evolution and strain localization during shear deformation of an aluminum alloy Acta Mater 44 10 4195 4208 1996
  10. Bouvier , S. , Haddadi , H. , Levee , P. , Teodosiu , C. , Simple shear tests: Experimental techniques and characterization of the plastic anisotropy of rolled sheets at large strains J Mater Technol 172 196 103 2006
  11. Bae , D. G. and Ghosh , A. K. , A planar simple shear test and flow behavior in a superplastic Al-Mg alloy Metall Mater Trans 34 2003 2465 2000
  12. Bonnet-Lebouvier , A. S. and Klepaczko , J. R. , Numerical study of shear deformation in Ti-6Al-4V at medium and high strain rates, critical impact velocity in shear Int J Impact Eng 27 7 755 769 2002
  13. Klepaczko , J. R. , An experimental-technique for shear testing at high and very high strain rates-the case of a very mild steel Int J Impact Eng 15 25 39 1994
  14. Klepaczko , J. R. , Nguyen , H. V. , Nowacki , W. K. , Quasi-static and dynamic shearing of sheet metals Eur J Mech A/Solids 18 271 289 1999
  15. Klepaczko , J. R. and Rusinek , A. Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress Int J Plas 17 87 115 2001
  16. G'Sell , C. , Boni , S. , Shrivastava , S. , Application of the plane simple shear test for determination of the plastic behavior of solid polymers at large strains J Mater Sci 18 903 918 1983
  17. Gao , F. , Gui , L. , Fan , Z. , Experimental and numerical analysis of an in-plane shear specimen designed for ductile fracture studies Exp Mech 51 891 901 2011
  18. Reyes , A. , Eriksson , M. , Lademo , O. G. , Hopperstad , O. S. , et al. Assessment of yield and fracture criteria using shear and bending tests Mat Des 30 596 608 2009
  19. Kang , J. , Wilkinson , D. S. , Wu , P. D. , Bruhis , M. , et al. Constitutive behaviour of AA5754 sheet materials at large strains Eng Mater Technol 130 1 5 2008
  20. Peirs , J. , Verleysen , P. , Degrieck , J. , Novel technique for static and dynamic shear testing of Ti6Al4V sheet Exp Mech 52 729 741 2012
  21. Peirs , J. , Verleysen , P. , Van Paepegem , W. , Degrieck , J. , Determining the stress-strain behaviour at large strains from high strain rate tensile and shear experiments Int J Imp Eng 38 406 415 2011
  22. Tarigopula , V. , Hopperstad , O. S. , Langseth , M. , Clausen , A. H. , et al. A study of large plastic deformations in dual phase steel using digital image correlation and FE analysis Exp Mech 48 2 181 196 2008
  23. Bao , Y. B. and Wierzbicki , T. , On fracture locus in the equivalent strain and stress triaxiality space Int J Mech Sci 46 1 81 98 2004
  24. Mohr , D. and Henn , S. , Calibration of stress-triaxiality dependant crack formation criteria: a new hybrid experimental-numerical method Exp Mech 47 805 820 2007
  25. Dunand , M. and Mohr , D. , Optimized butterfly specimen for the fracture testing of sheet materials under combined normal and shear loading Eng Frac Mech 78 2919 2934 2011
  26. Kurukuri , S. , Worswick , M. J. , Bardelcik , A. , Mishra , R. K. , et al. Constitutive behavior of commercial grade ZEK100 magnesium alloy sheet over a wide range of strain rates Metall Mater Trans 45A 3321 3337 2014
  27. Winkler , S. , Thompson , A. , Salisbury , C. , Worswick , M. J. , et al. Strain rate and temperature effects on the formability and damage of advanced high strength steels Metall Mater Trans A 39 6 1350 1358 2008
  28. Luo , M. , Dunand , M. , Mohr , D. , Experiments and modeling of anisotropic aluminum extrusions under multi-axial loading - part II: Ductile fracture Int J Plas 32 33 36 58 2012

Cited By

Recommended Content

Technical Paper Approximate Formability Analysis of Two-Step Stretch Flanges
Ground Vehicle Standard Definitions of Heat Treating Terms
Aerospace Standard Aluminum Alloy Tempers