This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Statistical Analysis of Kinetic Friction Coefficient for Dry Sliding Plain Bearing on Shaft Test of Polytetrafluoroethylene
Technical Paper
2014-36-0145
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper discusses the behavior of kinetic friction coefficient and temperature on contact of Polytetrafluoroethylene (PTFE) in a dry sliding test against stainless steel. This polymer is widely used in industry for many tribological applications without lubrication. It was performed essential tribological evaluations: the overall shape analysis of kinetic friction coefficient and temperature on contact curves, regions identification with distinct behavior and the mean and the standard deviation of the values obtained. For this purpose, long duration tests were performed (120 minutes) in a kinetic friction machine, developed and built at the UTFPR's Laboratory of Contact Surfaces, in which a PTFE plain bearing slides without lubrication over a stainless steel shaft with monitoring of kinetic friction coefficient and temperature on contact. The test condition simulates the polymer real application as plain bearing. Four normal loading levels were performed, the PV condition, however, was kept constant and within the material application range. It was determined for kinetic friction coefficient curves: running-in period and, through statistical inferences, periods of transition and stabilization. It was verified that the running-in period lasted about ten minutes, followed by a transition period lasting up to 70 minutes, from which the tribological system has stabilized. It was concluded that the beginning of kinetic friction coefficient stabilization period was dependent on variations of temperature on contact and contact area. The last one evolved, for the case studied, from non-conforming, at the initial condition, to conforming contact due to material wear.
Recommended Content
| Technical Paper | A Simple Project Process Model for Estimating and Controlling Cost and Schedule |
| Technical Paper | A Study of Three Layer Copper-Lead Bearings Without Nickel Barrier |
Authors
Citation
do Vale, J. and da Silva, C., "Statistical Analysis of Kinetic Friction Coefficient for Dry Sliding Plain Bearing on Shaft Test of Polytetrafluoroethylene," SAE Technical Paper 2014-36-0145, 2014, https://doi.org/10.4271/2014-36-0145.Also In
References
- KHODDAMZADEH , A. ; LIU , R. ; WU , X. Novel Polytetrafluoroethylene (PTFE) Composites with Newly Developed Triballoy Alloy Additive for Sliding Bearing Wear 266 646 657 2009
- NORTON , R. L. Projeto de Máquinas: Uma Abordagem Integrada Rio de Janeiro Bookman 2003
- CONTE , M. ; IGARTUA , A. Study of PTFE composites tribological behavior Wear 296 568 574 2012
- SEDLACEK , M. ; PODGORNIK , B ; VIZINTIN , J. Correlation between standard roughness parameters skewness and kurtosis and tribological behaviour of contact surfaces Tribology International 48 102 112 2012
- GGB Bearing Technology Mastering Complex Bearing Technology Industry & Engineering 2010 http://www.ggbearings.com/pdf/5426-57.pdf 05 fev. 2012
- KOIKE , H. ; KIDA , K. ; SANTOS , E. C. ; ROZWADOWSKA , J. ; KASHIMA; Y. ; KANEMASU , K. Self-lubrication of PEEK polymer bearings in rolling contact fatigue under radial loads Tribology International 49 30 38 2012
- ÜNLÜ , B. S. ; UZKUT , M. Tribological Behaviors of Polymer-based Particle-reinforced PTFE Composite Bearings Journal of Reinforced Plastics and Composites 29 09 2010
- LIU , Y. ; SCHAEFER , J. A. The Sliding Friction of Thermoplastic Polymer Composites Tested at Low Speeds Wear 261 568 577 2006
- MARX , S. ; JUNGHANS , R. Friction and Wear of Highly Stressed Thermoplastic Bearing Under Dry Sliding Conditions Wear 193 253 260 1996
- DAI , L. ; SATYANARAYANA , N. ; SINHA , S. ; TAN , V. B. C. Analysis of PTFE lubricating film in NEMS application via molecular dynamics simulation Tribology International 60 53 57 2013
- VALE , J. L. Estudo do comportamento tribológico do politetrafluoretileno em deslizamento sem lubrificação contra aço inoxidável. 165f Dissertação de Mestrado Universidade Tecnológica Federal do Paraná (UTFPR) Curitiba 2014
- YAMAGUCHI , Y. Tribology of Plastic Materials: Their Characteristics and Applications to Sliding Components New York Elsevier Science Publishers 1990
- KASHANI , M. R. ; BEHAZIN , E. ; FAKHAR , A. Construction and evaluation of a new tribometer for polymers Polymer Testing 30 271 276 2011
- FONSECA , J. S. ; MARTINS , G. A. Curso de estatística 6 São Paulo Editora Atlas 1996
- DEVORE , J. L. Probabilidade e Estatística: para engenharia e ciências 6 São Paulo Cengage Learning 2011
- BLAU , Peter J. Friction Science and Technology New York Marcel Dekker, Inc. 1996
- CALLISTER , W. D. Materials Science and Engineering: An Introduction 7 New York John Wiley & Sons 2007
- ARCHARD , J. F. Elastic deformation and the laws of friction Proceedings of the Royal Society of London 243 190 205 1957
- ASM Handbook Volume 18 - Friction, Lubrication and Wear Technology USA 1992