This content is not included in your SAE MOBILUS subscription, or you are not logged in.

The Effect of Fuel Temperature on the Ethanol Direct Injection Spray Characteristics of a Multi-hole Injector

Journal Article
2014-01-2734
ISSN: 1946-3952, e-ISSN: 1946-3960
Published October 13, 2014 by SAE International in United States
The Effect of Fuel Temperature on the Ethanol Direct Injection Spray Characteristics of a Multi-hole Injector
Sector:
Citation: Huang, Y., Huang, S., Deng, P., Huang, R. et al., "The Effect of Fuel Temperature on the Ethanol Direct Injection Spray Characteristics of a Multi-hole Injector," SAE Int. J. Fuels Lubr. 7(3):792-802, 2014, https://doi.org/10.4271/2014-01-2734.
Language: English

References

  1. Zhuang , Y. , Hong , G. Primary Investigation to Leveraging Effect of Using Ethanol Fuel on Reducing Gasoline Fuel Consumption Fuel 105 0 425 431 2013 http://dx.doi.org/10.1016/j.fuel.2012.09.013
  2. Wu , X. , Daniel , R. , Tian , G. , Xu , H. et al. Dual-injection: The flexible, bi-fuel concept for spark-ignition engines fuelled with various gasoline and biofuel blends Applied Energy 88 7 2305 2314 2011 http://dx.doi.org/10.1016/j.apenergy.2011.01.025
  3. Stein , R. A. , House , C. J. , Leone , T. G. Optimal Use of E85 in a Turbocharged Direct Injection Engine SAE Int. J. Fuels Lubr. 2 1 670 682 2009 10.4271/2009-01-1490
  4. Cohn , D. R. , Bromberg , L. , Heywood , J. Fuel Management System for Variable Ethanol Octane Enhancement of Gasoline Engines US Patent 2010175659 15 July 2010
  5. Yaws , C. L. Yaws' Handbook of Thermodynamic and Physical Properties of Chemical Compounds Knovel 2003
  6. Kar , K. , Last , T. , Haywood , C. , Raine , R. Measurement of Vapor Pressures and Enthalpies of Vaporization of Gasoline and Ethanol Blends and Their Effects on Mixture Preparation in an SI Engine SAE Int. J. Fuels Lubr. 1 1 132 144 2008 10.4271/2008-01-0317
  7. Tian , G. , Daniel , R. , Li , H. , Xu , H. et al. Laminar Burning Velocities of 2,5-Dimethylfuran Compared with Ethanol and Gasoline Energy & Fuels 24 7 3898 3905 2010 10.1021/ef100452c
  8. Daniel , R. , Wang , C. , Xu , H. , Tian , G. et al. Dual-Injection as a Knock Mitigation Strategy Using Pure Ethanol and Methanol SAE Int. J. Fuels Lubr. 5 2 772 784 2012 10.4271/2012-01-1152
  9. Huang , Y. , Hong , G. , Cheng , X. , Huang , R. Investigation to Charge Cooling Effect of Evaporation of Ethanol Fuel Directly Injected in a Gasoline Port Injection Engine SAE Technical Paper 2013-01-2610 2013 10.4271/2013-01-2610
  10. Srivastava , S. , Schock , H. , Jaberi , F. , Hung , D. L. S. Numerical Simulation of a Direct-Injection Spark-Ignition Engine with Different Fuels SAE Technical Paper 2009-01-0325 2009 10.4271/2009-01-0325
  11. Kasseris , P. K. Knock Limits in Spark Ignited Direct Injected Engines Using Gasoline/Ethanol Blends PhD Thesis Dept. of Mechanical Engineering, Massachusetts Institute of Technology Cambridge 2011
  12. Eng , J. A. The Effect of Spark Retard on Engine-out Hydrocarbon Emissions SAE Technical Paper 2005-01-3867 2005 10.4271/2005-01-3867
  13. Araneo , L. , Coghe , A. , Brunello , G. , Dondé , R. Effects of Fuel Temperature and Ambient Pressure on a GDI Swirled Injector Spray SAE Technical Paper 2000-01-1901 2000 10.4271/2000-01-1901
  14. Nakama , K. , Murase , E. , Imada , M. , Kusaka , J. et al. Effects of High Temperature Fuel on In-Cylinder Fuel Mixture Formation Process for Direct Injection Engine SAE Technical Paper 2003-32-0003 2003 10.4271/2003-32-0003
  15. Murase , E. , Nakama , K. , Toyoda , S. , Kusaka , J. et al. The Effects of Fuel Temperature on a Direct Injection Gasoline Spray in a Constant Volume Chamber SAE Technical Paper 2003-01-1810 2003 10.4271/2003-01-1810
  16. Matsumoto , A. , Zheng , Y. , Xie , X. , Lai , M. et al. Characterization of Multi-hole Spray and Mixing of Ethanol and Gasoline Fuels under DI Engine Conditions SAE Technical Paper 2010-01-2151 2010 10.4271/2010-01-2151
  17. Aleiferis , P. G. , van Romunde , Z. R. An analysis of spray development with iso-octane, n-pentane, gasoline, ethanol and n-butanol from a multi-hole injector under hot fuel conditions Fuel 105 0 143 168 2013 http://dx.doi.org/10.1016/j.fuel.2012.07.044
  18. Zeng , W. , Xu , M. , Zhang , G. , Zhang , Y. et al. Atomization and vaporization for flash-boiling multi-hole sprays with alcohol fuels Fuel 95 0 287 297 2012 10.1016/j.fuel.2011.08.048
  19. Ishikawa , N. , Hiraide , A. , Takabayashi , T. Air/Fuel Distribution Simulation in a Port Injected Gasoline Lean-burn Engine SAE Technical Paper 2001-01-1230 2001 10.4271/2001-01-1230
  20. Zanforlin , S. , Musu , E. , Frigo , S. , Gentili , R. Direct Injection and Charge Stratification in a 50 cc Two-Stroke Engine: CFD Studies and Test Bench Results ASME Conference Proceedings 2006
  21. Lippert , A. M. , El Tahry , S. H. , Huebler , M. S. , Parrish , S. E. et al. Development and Optimization of a Small-Displacement Spark-Ignition Direct-Injection Engine - Full-Load Operation SAE Technical Paper 2004-01-0034 2004 10.4271/2004-01-0034
  22. JAJCEVIC , D. , ALMBAUER , R. , SCHMIDT , S. , and GLINSNER , K. Simulation of Scavenging Process, Internal Mixture Preparation, and Combustion of a Gasoline Direct Injection Two-Cylinder Two-Stroke Engine 2009
  23. López , J. J. , Novella , R. , García , A. , Winklinger , J. F. Investigation of the ignition and combustion processes of a dual-fuel spray under diesel-like conditions using computational fluid dynamics (CFD) modeling Mathematical and Computer Modelling 57 7-8 1897 1906 2013 10.1016/j.mcm.2011.12.030
  24. Costa , M. , Sorge , U. , Allocca , L. Numerical study of the mixture formation process in a four-stroke GDI engine for two-wheel applications Simulation Modelling Practice and Theory 19 4 1212 1226 2011 10.1016/j.simpat.2010.07.006
  25. Costa , M. , Iorio , B. , Sorge , U. , and Alfuso , S. Assessment of a Numerical Model for Multi-Hole Gasoline Sprays to be Employed in the Simulation of Spark Ignition GDI Engines with a Jet-Guided Combustion Mode SAE Technical Paper 2009-01-1915 2009 10.4271/2009-01-1915
  26. Bai , Y. , Wang , J. , Wang , Z. , Shuai , S. Knocking Suppression by Stratified Stoichiometric Mixture With Two- Zone Homogeneity in a DISI Engine Journal of Engineering for Gas Turbines and Power 135 1 012803-012801 012803-012809 2013 10.1115/1.4005113
  27. Waidmann , W. , Boemer , A. , Braun , M. Adjustment and Verification of Model Parameters for Diesel Injection CFD Simulation SAE Technical Paper 2006-01-0241 2006 10.4271/2006-01-0241
  28. Li , H. , li , C. , Ma , X. , Tu , P. et al. Numerical Study of DMF and Gasoline Spray and Mixture Preparation in a GDI Engine SAE Technical Paper 2013-01-1592 2013 10.4271/2013-01-1592
  29. Deng , P. , Huang , R. , Zhang , Y. , Ma , Y. Development of a constant volume combustion bomb heated by premixed burning (in Chinese) J. Huazhong Univ. of Sci. & Tech. (Natural Science Edition) 41 8 121 127 2013
  30. Pastor , J. V. , García , J. M. , Pastor , J. M. , Zapata , L. D. Evaporating Diesel Spray Visualization using a Double-pass Shadowgraphy/Schlieren imaging SAE Technical Paper 2007-24-0026 2007 10.4271/2007-24-0026
  31. Pastor , J. V. , Payri , R. , Garcia-Oliver , J. M. , Briceño , F. J. Schlieren Methodology for the Analysis of Transient Diesel Flame Evolution SAE Int. J. Engines 6 3 1661 1676 2013 10.4271/2013-24-0041
  32. SAE International Surface Vehicle Recommended Practice Gasoline Fuel Injector Spray Measurement and Characterization SAE standard J2715 2007
  33. Kim , K. , Kim , D. , Jung , Y. , Bae , C. Spray and combustion characteristics of gasoline and diesel in a direct injection compression ignition engine Fuel 109 0 616 626 2013 http://dx.doi.org/10.1016/j.fuel.2013.02.060
  34. Handbook of Atomization and Sprays: Theory and Applications Springer 2011

Cited By