Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Influence of Test Procedure on Friction Behavior and its Repeatability in Dynamometer Brake Performance Testing

Journal Article
2014-01-2521
ISSN: 1946-3995, e-ISSN: 1946-4002
DOI: https://doi.org/10.4271/2014-01-2521
Published September 28, 2014 by SAE International in United States
Influence of Test Procedure on Friction Behavior and its Repeatability in Dynamometer Brake Performance Testing
Sector:
Citation: Grochowicz, J., Agudelo, C., Li, S., Abendroth, H. et al., "Influence of Test Procedure on Friction Behavior and its Repeatability in Dynamometer Brake Performance Testing," SAE Int. J. Passeng. Cars - Mech. Syst. 7(4):1345-1360, 2014, https://doi.org/10.4271/2014-01-2521.
Language: English

References

  1. Office for Research and Experiments of the International Union of Railways, “Brake pads for disc brakes and composition brake blocks -Report No. 8 Comparative tests with disc brakes on 14 full-scale dynamometers,” ORE Question B 126, September 1983
  2. Grochowicz, J., Wollenweber, K., Agudelo, C., and Abendroth, H., “Brake Dynamometer Test Variability - Analysis of Root Causes,” SAE Technical Paper 2010-01-1697, 2010, doi:10.4271/2010-01-1697.
  3. ISO International Standard, “Statistical Methods for Use in Proficiency Testing by Interlaboratory Comparisons”, ISO 13528:2005
  4. Minitab Inc., Minitab (Version 16), Statistical Software, State College, PA, 2013
  5. Grochowicz, J., Agudelo, C., Reich, A., Wollenweber, K. et al., “Brake Dynamometer Test Variability Part 2-Description of the Influencing Factors,” SAE Int. J. Passeng. Cars - Mech. Syst. 4(3):1394-1421, 2011, doi:10.4271/2011-01-2374.
  6. Grochowicz, J., Agudelo, C., Wollenweber, K-H., Reich, A., Abendroth, H. “Root Causes and Guidelines to Reduce Brake Dynamometer Variability (Example with ISO 26867)”, EuroBrake EB2012-TM-05
  7. SAE International Surface Vehicle Recommended Practice “Disc and Drum Brake Dynamometer Squeal Noise Test Procedure,” SAE Standard J2521, Rev. Apr. 2013.
  8. Grochowicz, J., Wollenweber, K-H, Lewenz, R., Göbel, H., Abendroth, H. Linka, I., Agudelo, C., Shin, S., Smith, G., “Brake Performance Testing: Dynamometer-to-Vehicle Correlation Study”, EuroBrake EB2013-TM-007
  9. Zimmer, D., “ATE Friction Test Machine and Other Methods of Lining Screening,” SAE Technical Paper 820163, 1982, doi:10.4271/820163.
  10. ISO International Standard, “Road vehicles-Brake lining friction materials-Friction behavior assessment for automotive brake systems,” ISO 26867:2009.
  11. ISO International Standard, “Road vehicles-Brake lining friction materials-Product definition and quality assurance,” ISO 15484:2008
  12. E.C.E., “Uniform Provisions Concerning the Approval of Replacement Brake Lining Assemblies, Drum Brake Linings. and Disc and Drums for Power-Driven Vehicles and Their Trailers,” ECE R90-02, Rev. Mar. 2013
  13. SAE International Surface Vehicle Recommended Practice, “Dynamometer Global Brake Effectiveness,” SAE Standard J2522, Rev. Jan. 2013.
  14. SAE International Surface Vehicle Recommended Practice, “FMVSS Inertia Dynamometer Test Procedure for Vehicles Below 4540 kg GVWR,” SAE Standard J2784, Rev. Sep. 2009.
  15. JASO Japanese Automotive Standard, “Passenger car - Braking device - Dynamometer test procedures,” C406, Rev. 2000
  16. VDA Verband der Automobilindustrie, “Scheibenbremsbeläge - Qualitätssicherung,” VDA 285-1, Dec. 1996
  17. SAE International Surface Vehicle Recommended Practice, “Brake Lining Quality Test Procedure,” SAE Standard J661, Rev. Nov. 2012.
  18. State General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China and Standardization Administration of the People's Republic of China, “Brake Lining for Automobiles,” GB5763, Jun. 2009
  19. SAE International Surface Vehicle Recommended Practice, “Friction Coefficient Identification and Environmental Marking System for Brake Linings,” SAE Standard J866, Rev. Jul. 2012.
  20. California Health and Safety Code, “Hazardous Materials: Motor Vehicle Brake Friction Materials,” Senate Bill (SB) 346, Feb. 2009
  21. Hazardous Waste and Toxics Reduction Program, “Better Brakes Rule,” Chapter 173-901 WAC, Sep. 2012
  22. Ostermeyer, G. and Perzborn, N., “Dynamic Friction Measurements, Especially for High Power Applications,” SAE Technical Paper 2011-01-2373, 2011, doi:10.4271/2011-01-2373.
  23. Ostermeyer, G. and Perzborn, N., “Test-Variability of Tribological Measurements,” SAE Technical Paper 2012-01-1805, 2012, doi:10.4271/2012-01-1805.
  24. Ostermeyer, G.-P., Dilnot, A. and Lange, J., “Analysis of Friction in Brakes on a Virtual AK-Master Test Rig” in Breuer B. (ed.), XXXI. Internationales μ-Symposium, 2012, Düsseldorf, VDI-Verlag
  25. Perzborn, N. and Ostermeyer, G.-P., “On the description and measurement of the friction coefficient in models of multibody dynamics,” PAMM, 11 (1): 63-64, 2011, doi:10.1002/pamm.201110023.
  26. SAE International Surface Vehicle Recommended Practice, “Inertia Calculation for Single-Ended Inertia-Dynamometer Testing,” J2789, Rev. Aug. 2010

Cited By

Recommended Content

Technical Paper Measuring the Phenomenon of Bumper Impact
Technical Paper Nonwovens in Automotive Applications
Journal Article The Evaluation of Mechanical Design and Comparison of Automotive Oil Filters