This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Cooling System Optimization for a 3 Cylinder Naturally Aspirated Inline Diesel Engine
Technical Paper
2014-01-2338
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper involves increase in engine power by increasing bore size and stroke length along with other required engine level design modifications. Main focus is on addressing the cooling related issues by optimizing the cooling jacket design and water pump flow parameters. Engine cooling requirements need to be upgraded to address increase in thermal loads because of reduction in cooling area between cylinder block and cylinder liner due to increase in bore size keeping engine block size fixed. Methodology used is cooling jacket optimization and water pump design modifications.
In internal combustion engines, cooling system involves a complex geometry of water jackets. For such complex systems, CFD simulations can be executed in a short period of time and are relatively inexpensive. CFD provides the ability to theoretically simulate any physical condition. Effective utilization of STAR CCM+ V8.04 is done for water jacket design of a 3 cylinder water cooled inline diesel engine. k-ε turbulence model was used for the present study. Coolant flow velocity and temperature distribution was used for study. Cylinder block and cylinder head were modeled in UG NX 7.5.
Recommended Content
Authors
Topic
Citation
Kale, V., Dharan Raju, B., and Dhiman, V., "Cooling System Optimization for a 3 Cylinder Naturally Aspirated Inline Diesel Engine," SAE Technical Paper 2014-01-2338, 2014, https://doi.org/10.4271/2014-01-2338.Also In
References
- Mulemane, A. and Soman, R. CFD Based Complete Engine Cooling Jacket Development and Analysis SAE Technical Paper 2007-01-4129 2007 10.4271/2007-01-4129
- Kruger, M. , Kessler, M. , Ataídes, R. , de la Rosa Siqueira, C. et al. Numerical Analysis of Flow at Water Jacket of an Internal Combustion Engine SAE Technical Paper 2008-01-0393 2008 10.4271/2008-01-0393
- Matsutani, T. , Nakada, T. , Shinpo, Y. , and Hatano, M. Water Jacket Spacer for Improvement of Cylinder Bore Temperature Distribution SAE Technical Paper 2005-01-1156 2005 10.4271/2005-01-1156
- Gavali, M. , Subbarao, A. , and Marathe, N. Optimization of Water Jacket Using CFD for Effective Cooling of Water-Cooled Diesel Engines SAE Technical Paper 2007-26-049 2007 10.4271/2007-26-049
- Makkapati, S. , Poe, S. , Shaikh, Z. , Cross, R. et al. Coolant Velocity Correlations in an IC Engine Coolant Jacket SAE Technical Paper 2002-01-1203 2002 10.4271/2002-01-1203
- Fontanesi, S. and McAssey, E. Experimental and Numerical Investigation of Conjugate Heat Transfer in a HSDI Diesel Engine Water Cooling Jacket SAE Technical Paper 2009-01-0703 2009 10.4271/2009-01-0703
- Cehreli, Z. Cooling System Optimization on a 5-Cylinder Engine SAE Technical Paper 2007-01-2600 2007 10.4271/2007-01-2600
- You-chang, L. hong, G. , and Dan, C. Research on Cooling System for 4-Cylinder Diesel Engine SAE Technical Paper 2007-01-2064 2007 10.4271/2007-01-2064
- Shih, S. , Itano, E. , Xin, J. , Kawamoto, M. et al. Engine Knock Toughness Improvement Through Water Jacket Optimization SAE Technical Paper 2003-01-3259 2003 10.4271/2003-01-3259
- Kessler, M. , Kruger, M. , Ataídes, R. , de la Rosa Siqueira, C. et al. Numerical Analysis of Flow at Water Jacket of an Internal Combustion Engine SAE Technical Paper 2007-01-2711 2007 10.4271/2007-01-2711
- Heywood John B. Internal Combustion Engine Fundamentals McGraw-Hill Inc.
- Ganeshan V. I.C. Engines McGraw-Hill Inc.
- Anderson John D. Jr. Computational Fluid Dynamics- The Basics with Applications McGraw-Hill International Editions