This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experimental Method for Extracting Dominant Suspension Mode Shapes Coupled with Automotive Interior Acoustic Mode Shapes
Technical Paper
2014-01-2045
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A finite element (FE) model of vibro-acoustic coupling analysis, such as a vehicle noise and vibration, is utilized for the improvement of the performance in the vehicle development phase. However, the accuracy of the analysis is not enough for substituting a prototype phase with a digital phase in the product development phases. Therefore, conducting the experiments with the prototype vehicle or the existed production vehicle is still very important for the performance evaluation and the model validation.
The vehicle noise transfer function of the road noise performance cannot be evaluated with the existed excitation equipment, such as the 3 or 6 directional electromagnetic shaker. Therefore, this paper proposes new experimental method to measure the road noise vehicle transfer function. This method is based on the reciprocity between the tire contact patch and the driver's ear location. The reaction force sensor of the tire contact patch is newly developed for the reciprocal loud speaker excitation at the passenger ear location. In addition, with this equipment, it is possible to extract the dominant structural mode shapes creating high sound pressure in the automotive interior acoustic field. This method is experimental structure mode participation to the noise of the acoustic field in the vibro-acoustic coupling analysis. This information is very important to improve the FE model accuracy to represent the physical phenomenon. The validity of the presented method is confirmed by the effectiveness of the structural countermeasures acquired by analyzing the structural causes from the extracted modes.
Recommended Content
Authors
Citation
Tsuji, H., Takabayashi, S., Takahashi, E., Murakami, H. et al., "Experimental Method for Extracting Dominant Suspension Mode Shapes Coupled with Automotive Interior Acoustic Mode Shapes," SAE Technical Paper 2014-01-2045, 2014, https://doi.org/10.4271/2014-01-2045.Also In
References
- Tsuji , H. , Maruyama , S. , Yoshimura , T. , and Takahashi , E. Experimental Method Extracting Dominant Acoustic Mode Shapes for Automotive Interior Acoustic Field Coupled with the Body Structure SAE Int. J. Passeng. Cars - Mech. Syst. 6 2 1139 1146 2013 10.4271/2013-01-1905
- Maruyama , S. , Hasegawa , A. , and Hyoudou , Y. Interior Noise Analysis Based on Acoustic Excitation Tests at Low-Frequency Range SAE Technical Paper 1999-01-1806 1999 10.4271/1999-01-1806
- Chargin Mladen , Gartmeier Otto A Finite Element Procedure for Calculating Fluid-Structure Interaction Using MSC/NASTRAN NASA Technical Memorandum 102857 Ames Research Center Moffett 1990
- Tsuji , H. , Enomoto , T. , Maruyama , S. , and Yoshimura , T. A Study of Experimental Acoustic Modal Analysis of Automotive Interior Acoustic Field Coupled with the Body Structure SAE Technical Paper 2012-01-1187 2012 10.4271/2012-01-1187
- Wyckaert Katrien , Augusztinovicz Fulop Vibro - acoustical Modal Analysis : Reciprocity Model Symmetry and Model Validatiy, ISMA19 739 760 1994
- Sung , S. , Nefske , D. , Le-The , H. , and Bonarens , F. Development and Experimental Evaluation of a Vehicle Structural-Acoustic Trimmed-Body Model SAE Technical Paper 1999-01-1798 1999 10.4271/1999-01-1798
- Tsuji H. , Maruyama S. et al. Experimental acoustic modal analysis for automotive interior acoustic field coupling with body structure JSAE Technical Paper No. 20105330 1 4 2010
- González Díaz C. , Vercammen S. , Middelberg J. , Kindt P. , Thiry C. , Leyssens J. Numerical prediction of the dynamic behaviour of rolling tyres ISMA2012_0891 2012
- Vercammen S. , González Díaz C. , Kindt P. , Middelberg J. , Thiry C. , Leyssens J. Experimental characterization of the dynamic behavior of rolling tires ISMA2012_0890 2012