This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hanger Location Design and Vibration Isolation of an Exhaust System
Technical Paper
2014-01-1708
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the present study, the research of the exhaust system is performed in three steps. In the first step, the average driving degree of freedom displacement (ADDOFD) is calculated by the free modal analysis of the exhaust system. It is easy to find the reasonable location of the hanger according to the value of the ADDOFD, since it represents the relative size of some DOF's response displacement at excitation state. The second of which is to analyse the vibration isolation performance of the exhaust system based on the first step. The dynamic analysis of the exhaust system together with the powertrain is studied, by which way the unit sinusoidal excitation is applied at the powertrain's mass centre, so that the response force at the hanger can be obtained. Finally, the relationship between the constrained model of the exhaust system and the stiffness of the hanger is investigated, which is significant in engineering.
Recommended Content
Magazine Issue | Automotive Engineering International 2004-09-01 |
Technical Paper | Acoustics of Turbochargers |
Technical Paper | Engineering Metrics for Disturbing Sound Elements of Automotive Exhaust Noise |
Authors
Citation
Chen, X., Zhang, Y., Zhang, Y., and Jiang, M., "Hanger Location Design and Vibration Isolation of an Exhaust System," SAE Technical Paper 2014-01-1708, 2014, https://doi.org/10.4271/2014-01-1708.Also In
References
- Brand , J. , Garcia , P. , and Wiemeler , D. Surface Radiated Noise of Exhaust Systems - Calculation and Optimization With CAE SAE Technical Paper 2004-01-0407 2004 10.4271/2004-01-0407
- Pang , J. and Qatu , M. Exhaust System Robustness Analysis Due to Flex Decoupler Stiffness Variation SAE Technical Paper 2003-01-1649 2003 10.4271/2003-01-1649
- Ling , S. F. Vibration Isolation of Exhaust Pipe under Vehicle Chassis International Journal of Vehicle Design 15 1/2 131 142 1994
- Lee , C. , Park , S. , and Kim , S. Development of a Simple Numerical Method of the Exhaust System to Find Optimized Design Values SAE Technical Paper 1999-01-1666 1999 10.4271/1999-01-1666
- Storck , H. , Sumali , H. , and Pu , Y. Experimental Modal Analysis of Automotive Exhaust Structures SAE Technical Paper 2001-01-0662 2001 10.4271/2001-01-0662
- Fang , X. , Ciray , M. , and Chen , Y. Dynamic Simulation & Correlation for Automotive Exhaust Systems SAE Technical Paper 2001-01-1437 2001 10.4271/2001-01-1437
- Pang , J. , Kurrle , P. , Qatu , M. , Rebandt , R. et al. Attribute Analysis and Criteria for Automotive Exhaust Systems SAE Technical Paper 2003-01-0221 2003 10.4271/2003-01-0221
- Patil , S. and Katkar , V. Approach for Dynamic Analysis of Automotive Exhaust System SAE Technical Paper 2008-01-2666 2008 10.4271/2008-01-2666
- Soundararajan , S. A Finite Element Methodology to Design and Validate the Performance of an Automotive Exhaust System SAE Technical Paper 2012-28-0019 2012 10.4271/2012-28-0019