This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Enhancement of a Software-Based Sensing Approach, which Instantaneously Determines the Mixture Fraction of Bio-Diesel Present in a Crude Oil Based Classic Diesel Fuel by Use of an Alternative Set of Integral Key-Parameters
Technical Paper
2014-01-1348
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper gives a short introduction to the bio-diesel mixture approach for diesel engines.
The paper continues with a description of the design of a strategy for recognition of a random bio-diesel fraction, Bx, by a purely software-based sensing technique, which creates an image of the temporal combustion behavior and uses only sensors already in service for current common rail mixture preparation systems.
A short description is made of a baseline approach of a sensing technique using a crank angle speed sensor. Hereafter the paper continues by the introduction of several integral or Upper Level (UL) key-parameters applied to enhance the precision of the Bx-detection or completely replace the original lower level combustion key-parameter set, which relates the instantaneous fraction of bio-diesel, Bx, to the engine torque.
The paper concludes presenting a series of experimental verification data obtained on a large-scale series produced 1.3 liter Turbo CR-rail passenger car engine.
Topic
Citation
Pontoppidan, M. and Montanari, G., "Enhancement of a Software-Based Sensing Approach, which Instantaneously Determines the Mixture Fraction of Bio-Diesel Present in a Crude Oil Based Classic Diesel Fuel by Use of an Alternative Set of Integral Key-Parameters," SAE Technical Paper 2014-01-1348, 2014, https://doi.org/10.4271/2014-01-1348.Also In
References
- Concave report Well-to-wheels analysis of future Automotive Fuels and Power trains in the European Context Well-to-wheels Eucar report 2007 http://ies.jrc.cec.eu.int/wtw.html
- Filho , V. P. Gasoline made with hydrous Ethanol Delphi South America Technical Center Brazil 2007
- Pontoppidan , M. , Montanari , G. , and Damasceno , F. Analysis of the Physical Boundary Conditions for the Layout of an Optimized Ethanol Low-Temperature Mixture Preparation Device SAE Technical Paper 2009-01-0618 2009 10.4271/2009-01-0618
- Pontoppidan M. Combined use of 3D-CFD Simulation and direct Visualization Techniques to decrease the Optimization Procedure Complexity of Combustion chamber Layout and Engine Control Pre-mapping operation necessary for Online Engine Test rig Optimization Internationales Symposium für Verbrennungsdiagnostik 2002 Baden-Baden 137 147
- Pontoppidan , M. , Ausiello , F. , Bella , G. , and Ubertini , S. Study of the Impact on the Combustion Process of Injector Nozzle Layout creating Enhanced Secondary Spray Break-up SAE Technical Paper 2003-01-0706 2003 10.4271/2003-01-0706
- Pontoppidan , M. , Bonfiglioli , S. , Damasceno , F. , and Montanari , G. Mixture Preparation Optimization by CFD of a Flex-Vehicle (Gasoline/Ethanol) Intake System Layout SAE Technical Paper 2004-01-3313 2004 10.4271/2004-01-3313
- Pontoppidan , M. , Damasceno , C. , Montanari , G. , and Bonfiglioli , S. Detailed Study of Ethanol In-cylinder Combustion Behavior by means of a Numerical Virtual Engine Model Approach SAE Technical Paper 2005-01-3989 2005 10.4271/2005-01-3989
- Pontoppidan , M. and Montanari , G. Development of a New Innovative Software-Based Sensing Technique to Instantaneously Measure the Mixture Fraction of Bio-Diesel Present in a Crude Oil Based Classic Diesel Fuel SAE Technical Paper 2012-36-0210 2012 10.4271/2012-36-0210
- Pontoppidan , M. and Montanari , G. Development of a New In-vehicle Sensing Method to Instantaneously Measure the Mixture Fraction of Bio-diesel Present in a Crude Oil based Classic Diesel Fuel SAE Technical Paper 2013-01-1745 2013 10.4271/2013-01-1745
- Patent Application PI 04 05 357-5 Magneti Marelli
- Taraza , D. Quantifying Relationships Between the Crankshaft's Speed Variation and the Gas Pressure Torque SAE Technical Paper 2001-01-1007 2001 10.4271/2001-01-1007
- Bianchi , G. , Pelloni , P. , Corcione , F. , and Luppino , F. Numerical Analysis of Passenger Car HSDI Diesel Engines with the 2nd Generation of Common Rail Injection Systems: The Effect of Multiple Injections on Emissions SAE Technical Paper 2001-01-1068 2001 10.4271/2001-01-1068
- Immarisio R. and Rinolfi , R. The third generation Direct Injection Diesel engine for Passenger Cars ATA Journal 52 1999