Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Modeling the Ignitability of a Pilot Injection for a Diesel Primary Reference Fuel: Impact of Injection Pressure, Ambient Temperature and Injected Mass

Journal Article
2014-01-1258
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2014-01-1258
Published April 01, 2014 by SAE International in United States
Modeling the Ignitability of a Pilot Injection for a Diesel Primary Reference Fuel: Impact of Injection Pressure, Ambient Temperature and Injected Mass
Sector:
Citation: Perini, F., Sahoo, D., Miles, P., and Reitz, R., "Modeling the Ignitability of a Pilot Injection for a Diesel Primary Reference Fuel: Impact of Injection Pressure, Ambient Temperature and Injected Mass," SAE Int. J. Fuels Lubr. 7(1):48-64, 2014, https://doi.org/10.4271/2014-01-1258.
Language: English

References

  1. Hotta , Y. , Inayoshi , M. , Nakakita , K. , Fujiwara , K. et al. Achieving Lower Exhaust Emissions and Better Performance in an HSDI Diesel Engine with Multiple Injection SAE Technical Paper 2005-01-0928 2005 10.4271/2005-01-0928
  2. Ricaud J.C. , Lavoisier F. Optimizing the Multiple Injection Settings on an HSDI Diesel Engine THIESEL Thermo-and Fluid Dynamic Processes in Diesel Engines 251 275 2002
  3. Badami , M. , Millo , F. , and D'Amato , D. Experimental Investigation on Soot and NOx Formation in a DI Common Rail Diesel Engine with Pilot Injection SAE Technical Paper 2001-01-0657 2001 10.4271/2001-01-0657
  4. Kastner O. , Atzler F. , Weigand A. , Wenzlawski K. , Muller A. , Zellbeck H. Multiple Injection Strategies and Their Effect on Pollutant Emission in Passenger Car Diesel Engines THIESEL Thermo- and Fluid Dynamic Processes in Diesel Engines 61 75 2006
  5. Hasse C. , Peters N. Modelling of Ignition Mechanisms and Pollutant Formation in Direct-Injection Diesel Engines with Multiple Injections International Journal of Engine Research 6 3 231 246 2005
  6. Park , C. , Kook , S. , and Bae , C. Effects of Multiple Injections in a HSDI Diesel Engine Equipped with Common Rail Injection System SAE Technical Paper 2004-01-0127 2004 10.4271/2004-01-0127
  7. Carlucci P. , Ficarella A. , Laforgia D. Effects on Combustion and Emissions of Early and Pilot Fuel Injections in Diesel Engines International Journal of Engine Research 6 1 43 60 2005
  8. Mendez , S. and Thirouard , B. Using Multiple Injection Strategies in Diesel Combustion: Potential to Improve Emissions, Noise and Fuel Economy Trade-Off in Low CR Engines SAE Int. J. Fuels Lubr. 1 1 662 674 2009 10.4271/2008-01-1329
  9. Sahoo , D. , Miles , P. , Trost , J. , and Leipertz , A. The Impact of Fuel Mass, Injection Pressure, Ambient Temperature, and Swirl Ratio on the Mixture Preparation of a Pilot Injection SAE Int. J. Engines 6 3 1716 1730 2013 10.4271/2013-24-0061
  10. Miles , P. , Sahoo , D. , Busch , S. , Trost , J. et al. Pilot Injection Ignition Properties Under Low-Temperature, Dilute In-Cylinder Conditions SAE Int. J. Engines 6 4 1888 1907 2013 10.4271/2013-01-2531
  11. Sahoo , D. , Petersen , B. , and Miles , P. Measurement of Equivalence Ratio in a Light-Duty Low Temperature Combustion Diesel Engine by Planar Laser Induced Fluorescence of a Fuel Tracer SAE Int. J. Engines 4 2 2312 2325 2011 10.4271/2011-24-0064
  12. Petersen , B. , Miles , P. , and Sahoo , D. Equivalence Ratio Distributions in a Light-Duty Diesel Engine Operating under Partially Premixed Conditions SAE Int. J. Engines 5 2 526 537 2012 10.4271/2012-01-0692
  13. Amsden A. A. KIVA-3V: A block-structured KIVA program for engines with vertical or canted valves LANL Technical Report LA-13313-MS 1997
  14. Perini F. , Galligani E. , Reitz R.D. An analytical Jacobian approach to sparse reaction kinetics for computationally efficient combustion modelling with large reaction mechanisms Energy&Fuels 26 8 4804 4822 2012
  15. Perini F. High-Dimensional, unsupervised cell clustering for computationally efficient engine simulations with detailed combustion chemistry Fuel 106 344 356 2012
  16. Perini F. , Anand , K. , Ra Y. , Reitz R.D. Computationally efficient simulation of multi-component fuel combustion using a sparse analytical Jacobian chemistry solver and high-dimensional clustering Proceedings of the ASME Internal Combustion Engine Division Fall Technical Conference, ICEF2013-19039 2013
  17. Perini , F. , Dempsey , A. , Reitz , R. , Sahoo , D. et al. A Computational Investigation of the Effects of Swirl Ratio and Injection Pressure on Mixture Preparation and Wall Heat Transfer in a Light-Duty Diesel Engine SAE Technical Paper 2013-01-1105 2013 10.4271/2013-01-1105
  18. Dempsey , A. , Wang , B. , Reitz , R. , Petersen , B. et al. Comparison of Quantitative In-Cylinder Equivalence Ratio Measurements with CFD Predictions for a Light Duty Low Temperature Combustion Diesel Engine SAE Int. J. Engines 5 2 162 184 2012 10.4271/2012-01-0143
  19. Beale J. C. and Reitz R. D. Modeling Spray Atomization with the Kelvin-Helmholtz/Rayleigh-Taylor hybrid model Atomization and Sprays 1999 9 623 650
  20. Abani N. , Munnannur A. , and Reitz R. D. Reduction of Numerical Parameter Dependencies in Diesel Spray Models Journal of Engineering for Gas Turbines and Power 2008 130 032809
  21. Reitz , R. and Bracco , F. On the Dependence of Spray Angle and Other Spray Parameters on Nozzle Design and Operating Conditions SAE Technical Paper 790494 1979 10.4271/790494
  22. O'Rourke , P. and Amsden , A. A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model SAE Technical Paper 2000-01-0271 2000 10.4271/2000-01-0271
  23. Ra Y. and Reitz R. D. A vaporization model for discrete multi-component fuel sprays International Journal of Multiphase Flow 2009 35 101 117
  24. Han Z. and Reitz R. D. Turbulence Modeling of Internal Combustion Engines Using RNG k-e Models Combustion Science and Technology 1995 106 267 295
  25. Daubert T.E. , Danner R.P. Physical and thermodynamic properties of pure chemicals: data compilation Taylor and Francis 1989
  26. Westbrook C.K. , Pitz W.J. , Mehl M. , Curran H.J. Detailed chemical kinetic reaction mechanisms for primary reference fuels for diesel cetane number and spark-ignition octane number Proceedings of the Combustion Institute 33 1 185 192 2011
  27. Ra Y. , Reitz R.D. A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels Combustion and Flame 155 4 713 738 2008
  28. Nomura H. , Ujiie Y. , Rath H.J. , Sato J. , Kono M. Experimental study on high-pressure droplet evaporation using microgravity conditions Twenty-Sixth Symposium (International) on Combustion 1267 1273 1996
  29. Shen H-P.S. , Steinberg J. , Vanderover J. , Oehlschlaeger M.A. A Shock Tube Study of the Ignition of n-Heptane, n-Decane, n-Dodecane, and n-Tetradecane at Elevated Pressures Energy&Fuels 23 5 2482 2489 2009
  30. Gauthier B.M. , Davidson D.F. , Hanson R.K. Shock tube determination of ignition delay times in full-blend and surrogate fuel mixtures Combustion and Flame 139 4 300 311
  31. Ciezki H. , Adomeit G. Shock-tube investigation of the ignition delay on n-heptane/air mixtures in a high pressure shock tube under conditions relevant to diesel-engine combustion AIP Conf. Prof. 280 707 1990
  32. Herzler J. , Jerig L. , Roth P. Shock tube study of the ignition of lean n-heptane/air mixtures at intermediate temperatures and high pressures Proceedings of the Combustion Institute 30 1 1147 1153 2005
  33. Griffiths J.F. , Halford-Maw P.A. , Rose D.J. Fundamental features of hydrocarbon autoignition in a rapid compression machine Combustion and Flame 95 3 291 306 1993
  34. Perini F. , Miles P.C. , Reitz R.D. A comprehensive modeling study of in-cylinder fluid flows in a high-swirl, light-duty optical diesel engine Computers and Fluids 2013
  35. Petersen , B. and Miles , P. PIV Measurements in the Swirl-Plane of a Motored Light-Duty Diesel Engine SAE Int. J. Engines 4 1 1623 1641 2011 10.4271/2011-01-1285
  36. Opat R. M. Investigation of mixing and temperature effects on UHC/CO emissions for highly dilute low temperature combustion in a light-duty Diesel engine Master thesis University of Wisconsin-Madison 2006
  37. Musculus M. , Miles P.C. , Pickett L.M. Conceptual models for partially premixed low-temperature diesel combustion Progress in Energy and Combustion Science 39 2-3 246 283 2013
  38. Nelder J.A. , Mead R. A simplex method for function minimization Computer Journal 7 1965 308 313
  39. Petersen , B. , Ekoto , I. , and Miles , P. An Investigation into the Effects of Fuel Properties and Engine Load on UHC and CO Emissions from a Light-Duty Optical Diesel Engine Operating in a Partially Premixed Combustion Regime SAE Int. J. Engines 3 2 38 55 2010 10.4271/2010-01-1470
  40. Perini , F. , Das Adhikary , B. , Lim , J. , Su , X. et al. Improved Chemical Kinetics Numerics for the Efficient Simulation of Advanced Combustion Strategies SAE Int. J. Engines 7 1 in press 2013 10.4271/2013-01-1625

Cited By

Recommended Content

Technical Paper A New Datadriven Approach to Modeling the Combustion of a Diesel Engine in HCCI Mode
Technical Paper Integration of a Cool-Flame Heat Release Rate Model into a 3-Stage Ignition Model for HCCI Applications and Different Fuels