This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Development of Friction Stir Weld Fatigue Evaluation Procedure Using Battelle Structural Stress Method

Journal Article
2014-01-0909
ISSN: 1946-3979, e-ISSN: 1946-3987
Published April 01, 2014 by SAE International in United States
Development of Friction Stir Weld Fatigue Evaluation Procedure Using Battelle Structural Stress Method
Sector:
Citation: Hong, J. and Forte, T., "Development of Friction Stir Weld Fatigue Evaluation Procedure Using Battelle Structural Stress Method," SAE Int. J. Mater. Manf. 7(2):432-438, 2014, https://doi.org/10.4271/2014-01-0909.
Language: English

References

  1. Fersini , D. , and Pirondi , A. Analysis and Modelling of Fatigue Failure of Friction Stir Welded Aluminum Alloy Single-Lap Joints Engineering Fracture Mechanics 75 790 803 2008
  2. Ericsson , M. , Jin , L.-Z. , and Sandstrom , R. Fatigue Properties of Friction Stir Overlap Welds International Journal of Fatigue 29 57 68 2007
  3. Ghidini , T. , Dalle Donne , C. , Alfaro Mercado , U. Predicting the Fatigue Life of Pristine and Pre-corroded Friction Stir Welded Joints International Journal of Structural Integrity 2 200 213 2011
  4. Tavares , S.M.O. , Castro , R.A.S. , Richter-Trummer , V. , Vilaca , P. , Moreira , P.M.P.G. , and de Castro , P.M.S.T. Friction Stir Welding of T-Joints with Dissimilar Aluminium Alloys: Mechanical Joint Characterisation Science and Technology of Welding and Joining 15 312 318 2010
  5. Garware , M. , Kridli , G.T. , Mallick , P.K. Tensile and Fatigue Behavior of Friction-Stir Welded Tailor-Welded Blank of Aluminum Alloy 5754 Journal of Materials Engineering and Performance 19 1161 1171 2010
  6. Ericsson , M. , Sandstrom , R. Influence of Welding Speed on the Fatigue of Friction Stir Welds and Comparison with MIG and TIG International Journal of Fatigue 25 1379 1387 2003
  7. Cavaliere , P. , Campanile , G. , Panella , F. , and Squillace , A. Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6056 Joints Produced by Friction Stir Welding Journal of Materials Processing Technology 180 263 270 2006
  8. Cavaliere , P. , Squillace , A. , and Panella , F. Effect of Welding Parameters on Mechanical and Microstructural Properties of AA6082 Joints Produced by Friction Stir Welding Journal of Materials Processing technology 200 364 372 2008
  9. Jung , S. P. , Park , T.W. , and Kim , Y.G. Fatigue Strength Optimisation of Friction Stir Welded A6006-T5 Alloy Sheets Science and Technology of Welding and Joining 15 473 478 2010
  10. Krasnowski , K. , Sedek , P. , Lomozik , M. , and Pietras , A. Impact of Selected FSW Process Parameters on Mechanical Properties of 6082-T6 Aluminium Alloy Archives of Metallurgy and Materials 56 965 973 2011
  11. 2007 ASME Boiler and Pressure Vessel Code, Section VIII, Div.2 ASME 2007
  12. API Standard 579-1/ASME FFS-1 Fitness for Service API 2007
  13. Guide for Application of the Mesh Insensitive Methodology - Welded Steel Plates of Ship and Offshore Structures NT 3199, Marine & Offshore Division, Bureau Veritas 2013
  14. Dong , P. and Hong , J. CAE Weld Durability Prediction: A Robust Single Damage Parameter Approach SAE Technical Paper 2002-01-0151 2002 10.4271/2002-01-0151
  15. Kyuba , H. , Dong , P. , Hong , J. , and Agrawal , H. Fatigue Life Prediction for a Recent ‘SAE Weld Challenge’ Problem SAE Technical Paper 2004-01-1234
  16. Hong , J. The Development of a Simplified Spot Weld Model for Battelle Structural Stress Calculation SAE Int. J. Mater. Manuf. 4 1 602 612 2011 10.4271/2011-01-0479
  17. Hong , J. and Forte , T. Development of Fatigue Evaluation Procedure for Weld-Bonded Joints Using the Battelle Structural Stress Method SAE Technical Paper 2012-01-0477 2012 10.4271/2012-01-0477
  18. Hobbacher , A. Recommendations for Fatigue Design of Welded Joints and Components IIW Document IIW-1823-07 2008
  19. Eurocode 9: Design of Aluminium Structures - Part 1-3: Structures Susceptible to Fatigue EN 1999-1-3 2007
  20. Dong , P. , Hong , J.K. , and Cao , Z. A Mesh-Insensitive Structural Stress Procedure for Fatigue Evaluation of Welded Structures IIW Doc. XIII-1902-01/XV-1089-01 2001
  21. Dong , P. , Hong , J. K. , Osage , D.A. , Dewees , D.J. , and Prager , M. The Master S-N Curve Method An Implementation for Fatigue Evaluation of Welded Components in the ASME B&PV Code, Section VIII, Division 2 and API 579-1/ASME FF-1 Welding Research Council Bulletin 523 Welding Research Council 2010
  22. Dong , P. , Hong , J.K. , and Cao , Z. Structural Stress Based Master S-N Curve for Welded Joints IIW Doc. XIII-1930-02/XV-1119-02 2002
  23. Dong , P. and Hong , J. K. The Master S-N Curve Approach to Fatigue Evaluation of Offshore and Marine Structures OMAE2004-51324 2004
  24. Dong , P. , Hong , J. K. , and de Jesus , A. M. P. Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite Trans. ASME Journal of Pressure Vessel Technology 139 3 355 362 2007
  25. Kainuma , S. , Katsuki , H. , Iwai , I. , and Kumagai , M. Evaluation of Fatigue Strength of Friction Stir Butt-Welded Aluminum Alloy Joints Inclined to Applied Cyclic Stress International Journal of Fatigue 30 2008 870 876
  26. Dong , P. , Hong , J.K. , and Cao , Z. Stresses and Stress Intensities at Notches: ‘Anomalous Crack Growth’ Revisited International Journal of Fatigue 25 811 825 2003
  27. Moreira , P.M.G.P. , Jesus , A.M.P. , Ribeiro , A.S. , and Castro , P.M.S.T. Fatigue Crack Growth Behaviour of the Friction Stir Welded 6082-T6 Aluminium Alloy Mechanica Experimental 16 99 106 2008
  28. Kim , J.-S. , Kim , C. , Jin , T.-E. , and Dong , P. Mean Load Effect on Fatigue on Welded Joints Using Structural Stress and Fracture Mechanics Approach Nuclear Engineering and Technology 38 277 284 2006
  29. Maymon , G. A ‘Unified’ and a (ΔK+ΔK max ) 1/2 Crack Growth Models for Aluminum 2024-T351 International Journal of Fatigue 27 629 638 2005
  30. Macdonald , K.A. , and Haagensen , P.J. Fatigue Design fo Welded Aluminum Rectangular Hollow Section Joints Engineering Failure Analysis 6 113 130 1999
  31. Lomolino , S. , Tovo , R. , and dos Santos , J. On the Fatigue Behaviour and Design Curves of Friction Stir Butt-Welded Al Alloys International Journal of Fatigue 27 305 316 2005
  32. Weld Fatigue Analysis of Aluminum Alloy Joints Battelle Structural Stress JIP Year 3 Material Battelle 2013
  33. Kim , W.-K. , Won , S.-T. , and Goo , B.-C. A Study on Mechanical Characteristics of the Friction Stir Welded A6005-T5 Extrusion International Journal of Precision Engineering And Manufacturing 11 6 931 936 2010
  34. Zhou , C. , Yang , X. , and Luan , G. Fatigue Properties of Friction Stir Welds in Al 5083 Alloy Scripta Materialia 53 1187 1191 2005

Cited By