This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Frequency Conversion Controlled Vapor Recovery System by Temperature and Flow Signals: Model Design and Parameters Optimization
Technical Paper
2013-01-2348
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Current gasoline-gas vapor recovery system is incomplete, for it cannot adjust the vapor-liquid ratio automatically due to the change of working temperature. To solve this problem, this paper intends to design a new system and optimize its parameters. In this research, variables control method is used for tests while linear regression is used for data processing. This new system moves proportion valve away and adds a DSP control module, a frequency conversion device, and a temperature sensor. With this research, it is clearly reviewed that the vapor-liquid ratio should remains 1.0 from 0 °C to 20 °C as its working temperature, be changed into 1.1 from 20 °C to 25 °C, be changed into 1.2 from 25 °C to 30 °C, and be changed into 1.3 when the working temperature is above 30 °C.
Recommended Content
Technical Paper | Valve Timing by Means of a Rotary Actuator |
Technical Paper | Research on Axially Grooved Heat Pipe Heat Transfer Characteristics in Ground Tests |
Technical Paper | Development of the DDV Actuation System on the IDF Aircraft |
Authors
Citation
Liu, Y., Wang, W., Wang, Z., Wei, W. et al., "Frequency Conversion Controlled Vapor Recovery System by Temperature and Flow Signals: Model Design and Parameters Optimization," SAE Technical Paper 2013-01-2348, 2013, https://doi.org/10.4271/2013-01-2348.Also In
References
- CHEN , J. The Introduction of Environmental Protection Technology of Petrochemical Industry 2005 China Petrochemical Press CO. LTD
- CHEN , J. et al. The Pollution and its Treatment Technology of VOCs of Hydrocarbon in Gasoline Service Station Chinese Journal of Environmental Engineering 2007 03 84 91
- Srivastava , A. Source apportionment of ambient VOCS in Mumbai city Atmospheric Environment 2004 38 39 6829 6843
- ZHANG , Z. Introduction of American Gasoline-gas Recovery System Technology 1st Conference of 4th Committee of Branch of Environmental Protection of Chinese Mechanical Engineering Society 2008 Zhengzhou, Henan Province, P.R. China
- Wang , C. Gasoline-gas Recovery and Environmental Protection of America Commercial Times 2004 10 47
- LIU , J. Research of Gasoline-gas Recovery System Based on Temperature and Flow Signals 2012 South China University of Technology
- Shen , M. , Hao J. , and Wang L. VOC emission situation and control measures of gas station in China Huan jing ke xue= Huanjing kexue/[bian ji, Zhongguo ke xue yuan huan jing ke xue wei yuan hui” Huan jing ke xue” bian ji wei yuan hui.] 2006 27 8 1473
- Wada , S. , Kikura H. , and Aritomi M. Pattern recognition and signal processing of ultrasonic echo signal on two-phase flow Flow Measurement and Instrumentation 2006 17 4 207 224
- CAO , J. , CHEN J. , and WANG J. A Real-Time Petrol-Stations-Oriented Test and Control System for the Oil Vapor Recycling and Processing Device Journal of Test and Measurement Technology 2008 4 007
- Nunes , S.P. and Peinemann K.-V. Membrane technology 2001 Wiley Online Library
- WEI , H. , HE R. , and CAI J. New Design of Vehicle-Mounted Gasoline-gas Recovery System Automobile Technology 2008 12 32 35
- Koch , W. Developing Technology for Enhanced Vapor Recovery: Part 1-Vent Processors Petroleum Equipment & Technology 2001 16 22
- LAO , X. Discussion for oil and gas recovery of mobile oil station Guangdong Chemical Industry 2004 3 18 20