This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Hole Cross Section Shape Influence on Diesel Nozzle Flow
Technical Paper
2013-01-1609
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Progress in hole drilling technique is opening new perspectives in diesel nozzle design. In such a scenario, research on unconventional hole shapes looks worthwhile, in order to evaluate their influence on fuel flow features within the nozzle. In the present paper, investigations have been based on modeling. Moving from a standard hole configuration towards oval shaped holes, 3D-CFD campaigns have been devoted to highlight the hole layout influence on diesel nozzle flow. The investigations have been focused both on the fuel flow pattern at hole inlet and on the flow features at hole exit section; in such a modeling process, transient data concerning spatial distribution of velocity, turbulent kinetic energy and cavitation behavior at hole exit have been computed, highlighting the perturbations induced by the unconventional hole shape on the fuel flow; once the flow behavior has been explored, results have been resumed indicating how flow pattern properties are reflected at hole exit, quantitatively.
Recommended Content
Authors
Citation
Chiatti, G. and Palmieri, F., "Hole Cross Section Shape Influence on Diesel Nozzle Flow," SAE Technical Paper 2013-01-1609, 2013, https://doi.org/10.4271/2013-01-1609.Also In
References
- Som , S. , Ramirez , A.I. , Longman , D.E. , Aggarwal , S.K. Effect of Nozzle Orifice on Spray, Combustion and Emission Characteristics Under Diesel Engine Conditions Fuel 90 2011 1267 1276 10.1016/j.fuel.2010.10.048
- Rajurkar , K. P. , Narasimhan , J. A Report On Technology Assessment Of Electrical Discharge And Electro-Chemical Machine Tools AMT - The Association for Manufacturing Technology 7901 Westpark Drive, McLean, VA 22102 2004
- Fenske , G. Fabrication of Small Diesel Fuel Injector Orifices DOE Vehicle Technologies Program Annual Merit Review February 25 2008
- Blau , P. J. ; Howe , J. Y. ; Coffey , D. W. ; Trejo , R. M. ; Kenik , E. D. ; Jolly , B. C. ; Yang , N. Microstructure, Morphology, and Nanomechanical Properties Near Fine Holes Produced by Electro-Discharge Machining Journal of Materials Engineering and Performance 10.1007/s11665-011-0070-6
- Diver , C. , Atkinson , J. , Helml , H.J. , Li , L. Micro-EDM drilling of tapered holes for industrial applications Journal of Materials Processing Technology 149 1-3 296 303 2004
- Öing , H. Entwicklung eines neuen dieselmotorischen Injektorkonzeptes für zukünftige Emissionsgrenzwerte Doktor-Ingenieur genehmigte Dissertation Fachbereich Maschinenbau - Universität Hannover 2000
- Öing , H. , Koyanagi , K. , Maly , R. R. , Renner , G. , Stotz , M. Einfluß von Einspritzverlauf und Düsenauslegung auf das Brennverhalten bei Pkw Common Rail Einspritzung; in Motorische Verbrennung -aktuelle Probleme und moderne Lösungsansätze IV Tagung Motorische Verbrennung, Haus der Technik Essen 185 194 1999
- Chiatti , G. , and Palmieri , F. Actual Tip Layout and Off-Axis Needle motion in Nozzle Flow Modeling Under ballistic Needle Displacement ASME ICES Conf. Proc. 2012-81120
- FIRE CFDWM User Guide (solver version 2010) AVL List Graz, Austria 2010
- FIRE Multiphase Manual AVL List Graz, Austria 2010
- von Kuensberg Sarre , C. , Kong , S. , and Reitz , R. Modeling the Effects of Injector Nozzle Geometry on Diesel Sprays SAE Technical Paper 1999-01-0912 1999 10.4271/1999-01-0912
- Powell C. F. , Kastengren A. L. , Liu Z. , and Fezzaa K. The Effects of Diesel Injector Needle Motion on Spray Structure J. Eng. Gas Turbines Power 133 012802 2011 10.1115/1.4001073
- AMESim Tutorials and User Guide LMS 2011
- Seykens , X.L.J. , Somers , L.M.T. and Baert , R.S.G. Detailed Modeling of Common Rail Fuel Injection Process Mecca. J Middle Eur Constr Des Cars III 2005 30 40
- Catania , A. , Ferrari , A. and Manno , M. Development and Application of a Complete Common-Rail Injection System Mathematical Model for Hydrodynamic Analysis and Diagnostics ASME ICES Conf. Proc. 2005-1018
- Chiatti , G. , Chiavola , O. , Palmieri , F. Injector Dynamic and Nozzle Flow Features in Multiple Injection Modeling SAE Technical Paper 2007-24-0038 2007