This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A New Method for Determination of Forming Limit Diagram Based on Digital Image Correlation
Technical Paper
2013-01-1421
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this paper, a new method for determining the forming limit diagram (FLD) of thin sheet metals, called DIC-Grid method, is proposed based on digital image correlation (DIC) technique. It's assumed that there exists one virtual grid with an initial diameter of 2.5mm, which is usually the same dimension as the grid in traditional circular grid analysis, close to the crack of specimen, and the limit strain point on FLD is determined by the deformation of this virtual grid. The DIC-Grid method has been compared with traditional circular grid analysis and the standard ISO/FDIS 12004-2 in Nakajima tests. The results show that the forming limit strains obtained by the newly proposed method are more stable and precise. Furthermore, DIC-Grid method can avoid the measurement error which exists in the circular grid analysis. Meanwhile, it overcomes the shortcomings of time-consuming data processing and non-applicable for unrealistic strain distribution in the method of ISO standard. In addition, the effect of the ratio between DIC frame rate and the punch velocity on the determination of forming limit strains is studied, and the minimum value of this ratio is suggested.
Recommended Content
Technical Paper | Tailored Hybrid Blanks in Steel and Aluminium |
Technical Paper | Fatigue Analysis of Steel MIG Welds in Automotive Structures |
Technical Paper | The Research on Edge Tearing with Digital Image Correlation |
Authors
Citation
Zhang, L., Lin, J., Sun, L., Wang, C. et al., "A New Method for Determination of Forming Limit Diagram Based on Digital Image Correlation," SAE Technical Paper 2013-01-1421, 2013, https://doi.org/10.4271/2013-01-1421.Also In
References
- Keeler S.P. , Backofen W.A. Plastic instability and fracture in sheets stretched over rigid punches Trans. ASM 56 25 48 1963
- Goodwin , G. Application of Strain Analysis to Sheet Metal Forming Problems in the Press Shop SAE Technical Paper 680093 1968 10.4271/680093
- Harvey D.N. Optimizing patterns and computational algorithms for automatic, optical strain measurement in sheet metal, efficiency in sheet metal forming 13th Biennial Congress Melbourne, Australia International Deep Drawing Research Group 1984
- Lee R.S. , Hsu Q.C. Image processing system for circular grid analysis in sheet metal forming Exp. Mech. 34 2 108 115 1994 10.1007/BF02325707
- Kurita Masanori , Ma Yaowu Strain measurement by a diffraction grating method NDT & E International 31 2 77 83 1998 10.1016/S0963-8695(97)00038-8
- Sirkis J.S. , Lim T.J. Displacement and strain-measurement with automated grid methods Exp. Mech. 31 4 382 388 1991 10.1007/BF02325997
- Orteu J-J , Garric V , Devy M Camera calibration for 3D reconstruction: application to the measurement of 3D deformations on sheet metal parts Proceedings of the SPIE 252 263 1997 10.1117/12.281287
- Chan H.-L. , Spence A.D. , Sklad M.P. Laser digitizer-based sheet metal strain and surface analysis International Journal of Machine Tools & Manufacture 47 1 191 203 2007 10.1016/j.ijmachtools.2005.12.013
- Bing Pan , Kemao Qian , Huimin Xie et al. Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review Measurement science & Technology 20 6 2009 10.1088/0957-0233/20/6/062001
- Thompson M.S. , Schell H. , Lienau J. et al. Digital image correlation: A technique for determining local mechanical conditions within early bone callus Medical Engineering & Physics 29 7 820 823 2007 10.1016/j.medengphy.2006.08.012
- Kwon H.J. , Rogalsky Allan D. , Kovalchick Christopher et al. Application of digital image correlation method to biogel Polymer Engineering & Science 50 8 1585 1593 2010 10.1002/pen.21636
- Jerabek M. , Major Z. , Lang R.W. Strain determination of polymeric materials using digital image correlation Polymer Testing 29 3 407 416 2010 10.1016/j.polymertesting.2010.01.005
- ISO/FDIS 12004-2 2008 Metallic materials - Sheet and strip - Determination of forming-limit curves - Part 2: Determination of forming-limit curves in the laboratory ISO Final Draft International Standard 2008
- Beaver P.W. Localized thinning, fracture and formability of aluminum sheet alloys in biaxial tension J. Mech. Work. Technol. 7 3 215 231 1983 10.1016/0378-3804(83)90001-3
- Sriram , S. , Huang , G. , Yan , B. , and Geoffroy , J. Comparison of Forming Limit Curves for Advanced High Strength Steels Using Different Techniques SAE Int. J. Mater. Manuf. 2 1 472 481 2009 10.4271/2009-01-1173