This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Innovative Process-Integrated Measurements of Products and Parts - Patented Grid Application of Stereo Photography and Photogrammetry
Technical Paper
2013-01-1376
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Achieving and sustaining high levels of quality is an essential prerequisite for successful and sustainable development. The requirement for the description of the existing quality levels are measurement parameters and comparative values for defining the state of the art.
The quality of products is defined by measurements determining information for comparing with the planned parameters. The measurement results are used to determine absolutely and relatively the achieved quality. Products change shape and form within the whole product lifecycle. The more accurate and safe the measurement of form and shape become, the better the product quality can be defined.
The methods of 3D-measurement are divided into contact (mechanical) and non-contact (optical) using CMMs, 3D scanners and 3D cameras. Advanced methods exploit e.g. the stereo photography. Therefore, a scanner technology has been developed based on 3D surface stereo photography. Basis for the mathematical processing is the photogrammetry. So, the spatial position or the three-dimensional shape and form are determinable.
The scanners are designed modularly. They enable the serial and parallel interconnection of various scanner modules to a matrix. The measurement of large areas in short time intervals will be possible. Measuring and processing of the point cloud will be realized much faster and with higher accuracy. The use of these methods and technologies in the context of modular design of the scanner, and their combination in a matrix arrangement are the outstanding USP for this innovation. The idea was proofed and patented as “Scanning system with stereo camera set” (e.g. US7639372B2).
Authors
Citation
Schumann, C., MUELLER, E., Gerlach, D., Tittmann, C. et al., "Innovative Process-Integrated Measurements of Products and Parts - Patented Grid Application of Stereo Photography and Photogrammetry," SAE Technical Paper 2013-01-1376, 2013, https://doi.org/10.4271/2013-01-1376.Also In
References
- Rutsch , A. , Schumann , Chr.-A. 2008 An Approach for an Automated and Market-Driven Optimisation of Product Ranges as Part of the Product Lifecycle Management Framework Proceedings of the 9th ASME Engineering Systems Design and Analysis Conference. ESDA 2008 Haifa. Israel 0-7918-3827-7
- Schumann , Ch. , Teich , T. , Militzer , J. , Unger , K. 2008 An Evaluation of Existing Step Solutions for Automated Process Planning Intelligent Manufacturing & Automation. Proceedings of the 19th DAAAM Symposium DAAAM International Vienna 1231 1232 978-3-901509-68-1
- Schumann , Chr.-A. , Rutsch , A. 2009 PLM and PDM in corporate information environments - development scenarios upon the example of the Y-CIM model Mahon , Ch. , Dutta , D. , Huang , G. Product Lifecycle Management. PLM09 6th International Conference on PLM. Book of Abstracts and Electronic Proceedings Bath 76 978-1-86197-173-9
- Schumann , Chr.-A. , Kassel , St. , Rutsch , A. , Teich , T. , Tittmann , C. 2009 Transformation management of interdisciplinary product lifecycle modelling and application in ICT and VR environments van Landeghem , H. , van Welden , D. , Proceedings of the 16th European Concurrent Engineering Conference 2009 82 86 978-90-77381-47-2
- Rutsch , A. , Schumann , Chr.-A. , Müüller , E. 2009 Produktlebenszyklus- und Produktdatenmanagement im Umfeld betrieblicher Informationssysteme Dangelmaier , W. , Blecken , A. , Rüüngener , N. Nachhaltigkeit in flexiblen Produktions- und Liefernetzwerken MV Wissenschaft Müünster 341 352 978-3-86582-8521
- Kassel , S. ; Schumann , C.A. ; Rutsch , A. ; Reich , T. 2009 An Interoperability Architecture for Networked Service Delivery Proceedings of the International Workshop on Enterprise Interoperability Valencia (Spain) Springer LNBIP 38 125 132 978-3-642-04749-7 978-3-642-04750-3
- Schumann , C.-A. ; Rutsch , A. ; Breunig , A. ; Nikoghosyan , N. 2010 Towards a Market Cross-Linking System_Facing the PLM Challenge University Review 4 3 Trenčíín Alexander Dubček Uni-versity of Trenčíín 17 28 1337-6047
- Tittmann , Claudia ; Schumann , C.-A. 2010 Evolution analysis of knowledge potentials by pattern matrices. ECKM2010 - European Conference on Knowledge Management, Famalicao, Portugal Proceedings of the 11th European Conference on Knowledge Management Two Toméé , E. Academic Publishing Ltd. Reading. UK 892 900 978-1-906638-71-9
- Rutsch , A. ; Schumann , C.-A. ; Müüller , E. ; Göötze , J. 2011 Industrial Information Site Mapping (I #2 SM) 17th European Concurrent Engineering Conference 2011 London EUROSIS-ETI Publications Ostend. Belgium 43 45 978-90-77381-61-8
- Rutsch , A. ; Schumann , C.-A. ; Laroque , C. 2011 Perspectives for Modelling and Sustaining High Performance Logistic Organisation in a Global Environment British Academy of Management Conference. BAM 2011: Building and Sustaining High Performance Organisations in a Challenging Environment Birmingham 978-0-9549608-3-4
- Hoffmann , K. , Schumann , C.-A. 2011 Performance Measurement in Facility Management Academy Publish: Open Journal of Economic Research 1 1 Wyoming U.S.A. 2161-7120
- Göötze , J. ; Müüller , E. ; Rutsch , A. ; Schumann , C.-A. 2012 Semantic Technologies and Augmented Reality for Inspection and Maintenance Processes 18th European Concurrent Engineering Conference 2012 Bucharest EUROSIS-ETI Publications Ostend. Belgium Vasiliu , N. ; Dobre , C. 45 48 978-90-77381-70-0