This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Identification of Dry Sliding Wear Behavior of B 4 C P Particulate Reinforced Mg Matrix Composites for Automobile Disk Brakes
Technical Paper
2013-01-1221
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Prediction of brake disc materials wear versus their formulation with brake operating conditions can play a critical role in the development of future brake disc materials. In this paper identification of the dry sliding wear behavior of magnesium (Mg) matrix (MMCs) reinforced with 0-3-6 wt % B4C particulates (B4Cp) was investigated. Wear tests were performed on a pin-on-disk configuration against SAE 1040 steel counter body under constant load and sliding speed. The wear resistance of composites was evaluated as a function of B4C particulates reinforcement. Identified models were based on experimental results. The wear load was considered as the input parameter, whereas the wear rate and friction of coefficient as the output parameter. A first order continuous-time linear model structure was chosen for the modeling. Simulations using the identified models were compared with experimental results and it was found that the modeling of wear process was satisfactory.
Recommended Content
| Technical Paper | Finite Difference Heat Transfer Model of a Steel-clad Aluminum Brake Rotor |
| Technical Paper | High-Performance Phenolic Resin Idler Pulley |
Authors
Topic
Citation
Istif, I., Isin, O., Uzunsoy, E., and Uzunsoy, D., "Identification of Dry Sliding Wear Behavior of B4CP Particulate Reinforced Mg Matrix Composites for Automobile Disk Brakes," SAE Technical Paper 2013-01-1221, 2013, https://doi.org/10.4271/2013-01-1221.Also In
References
- Jiang Q.C. , Wang H.Y. , Ma B.X. , Wang Y. , Zhao F. Fabrication of B 4 C Particulate Reinforced Magnesium Matrix Composite By Powder Metallurgy Journal of Alloys and Compounds 386 177 181 2005
- Hassan S.F. , Gupta M. Development of a Novel Magnesium-Copper Based Composite with Improved Mechanical Properties Mater. Res. Bull. 37 377 389 2002
- Trojanova Z. , Gartnerova V. , Jager A. et al. Mechanical and Fracture Properties of an AZ91 Magnesium Alloy Reinforced by Si and SiC Particles Compos. Sci. Technol. 69 2256 2264 2009
- Sinha S.K. , Reddy S.U. and Gupta M. Scratch Hardness and Mechanical Property Correlation for Mg/SiC and Mg/SiC/Ti Metal-Matrix Composites Tribol. Int. 39 184 189 2006
- Deng K.K. , Wu K. , Wu Y.W. et al. Effect of Submicron Size SiC Particulates on Microstructure and Mechanical Properties of AZ91 Magnesium Matrix Composites J. Alloy Compd. 504 542 547 2010
- Poddar P. , Srivastava V.C. , De P.K. et al. Processing and Mechanical Properties of SiC Reinforced Cast Magnesium Matrix Composites by Stir Casting Process Mat. Sci. Eng. A. 460 357 364 2007
- Falcon-Franco L. , Bedolla-Becerril E. , Lemus-Ruiz J. et al. Wear Performance of TiC As Reinforcement of a Magnesium Alloy Matrix Composite Compos. Part B-Engineering 42 275 279 2011
- Jiang Q.C. , Li X.L. , Wang H.Y. Fabrication of TiC Particulate Reinforced Magnesium Matrix Composites Scripta Mater. 48 713 717 2003
- Wang H.Y. , Jiang Q.C. , Zhao Y.Q. et al. Fabrication of TiB 2 and TiB 2 -TiC Particulates Reinforced Magnesium Matrix Composites Mat. Sci. Eng. A-Struct. 372 109 114 2004
- Zhang X.Q. , Wang H.W , Liao L.H. et al. The Mechanical Properties of Magnesium Matrix Composites Reinforced with (TiB 2 + TiC) Ceramic Particulates Matter Lett. 59 2105 2109 2005
- Jiang Q.C. , Wang H.Y. , Ma B.X. et al. Fabrication of B 4 C Particulate Reinforced Magnesium Matrix Composite by Powder Metallurgy J. Alloy Compd. 386 177 181 2005
- Ding H.L. , Liu L.F. , Kamado S. et al. Study of The Microstructure, Texture and Tensile Properties of As-Extruded AZ91 Magnesium Alloy J. Alloy Compd. 456 400 406 2008
- Wang L.G. , Zhang B.F. , Zhu S.J. et al. Effects of Silicocalcium on Microstructure and Properties of Mg-6Al-0.5Mn Alloy T. Nonferr. Metal Soc. 16 551 555 2006
- Trojanova Z. , Gartnerova V. , Jager A. et al. Mechanical and Fracture Properties of an AZ91 Magnesium Alloy Reinforced by Si and SiC Particles Compos. Sci. Technol. 69 2256 2264 2009
- Elalem K , Li DY. Dynamical Simulation Of An Abrasive Wear Process J. Comput.-Aided Mater. 6 185 193 1999
- Fillot N , Iordanof I , Berthier Y. Wear Modeling And The Third Body Concept Wear 262 949 957 2006
- Aleksendric D. Neural Network Prediction Of Brake Friction Materials Wear Wear 268 117 125 2010
- AbuBakar AR , Ouyang H. Wear Prediction Of Friction Material And Brake Squeal Using The Finite Element Method Wear 264 1069 1076 2008
- Aleksendric D , Duboka C. Prediction Of Friction Material Characteristics Using Artificial Neural Networks-Cold Performance Wear 261 269 282 2006
- Istif I. Identification And Position Control Of A System Consisting Of A Proportional Valve And A Hydraulic Cylinder PhD Thesis Istanbul Tech. Univ. 2003
- Eker I. Second Order Sliding Mode Control With Experimental Application ISA T. 49 394 405 2010
- Ljung L. System identification - Theory for the user 2 nd Upper Saddle River PTR Prentice Hall 1999
- Ljung L. System Identification and Simple Process Models International Symposium on Advanced Control of Industrial Processes Kumamoto, Japan 2002
- Guleryuz L.F. , Ozan S. , Uzunsoy D. and İpek R. Characterisation of B 4 C p Reinforced PM Magnesium Composite Powder Metallurgy and Metal Ceramics November 2012
- Guleryuz L. F. , Ozan S. , Uzunsoy D. , Ipek R. Investigation of Dry Sliding Wear Behaviour of B4C Particulate Reinforced Mg Matrix Composites 2nd Advances in Applied Physics and Materials Science Congress, APMAS 2012 Antalya-Türkiye