This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Predicting Failure during Sheared Edge Stretching Using a Damage-Based Model for the Shear-Affected Zone
Journal Article
2013-01-1166
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Butcher, C., Anderson, D., and Worswick, M., "Predicting Failure during Sheared Edge Stretching Using a Damage-Based Model for the Shear-Affected Zone," SAE Int. J. Mater. Manf. 6(2):304-312, 2013, https://doi.org/10.4271/2013-01-1166.
Language:
English
References
- Hosegawa , K. , Kawanura , K. , Urabe , T. and Hosoya , Y. 2004 Effects of microstructure on stretch-flange-formability of 980 MPa cold-rolled ultra-high strength steel sheets ISIJ International 44 603 609
- Levy , B.S. and Van Tyne , C.J. 2008 Failure during sheared edge stretching Journal of Materials Engineering and Performance 17 842 848
- Milosevec , Z. , Moussy , F. 1987 Simulation of sheared edge behaviour in stretch flanging by a modified Fukui test Advanced Technology of Plasticity Vol II Lange K. Springer-Verlag Berlin, Germany 697 702
- Wu , X. , Bahmanpour , H. , Schmid , K. 2012 Characterization of mechanically sheared edges of dual phase steels Journal of Materials Processing Technology 212 1209 1224
- Gurson , A.L. 1977 Continuum theory of ductile rupture by void nucleation and growth - Part I. Yield criteria and flow rules for porous ductile media Journal of Engineering Materials and Technology 99 2 15
- Tvergaard , V. 1981 Influence of voids on shear band instabilities under plane strain conditions International Journal of Fracture 17 389 407
- Tvergaard , V. and Needleman , A. 1984 Analysis of the cup-cone fracture in a round tensile test bar Acta Metallurgica 32 157 169
- Chu , C.C. and Needleman , A. 1980 Void nucleation effects in biaxially stretched sheets Journal of Engineering Material and Technology 102 249 256
- Thomason , P.F. 1990 Ductile fracture of metals Pergamon Press Inc. Oxford
- Zhang , Z.L. and Niemi , E. 1994a Studies on the ductility predictions by different local failure criteria Engineering Fracture Mechanics 48 529 540
- Pardoen , T. and Hutchinson , J.W. 2000 An extended model for void growth and coalescence Journal of the Mechanics and Physics of Solids 48 2567 2512
- Maire , E. , Bouaziz , O. , Di Michiel , M. and Verdu , C. 2008 Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography Acta Materialia 56 4954 4964
- Landron , C. , Bouaziz , O. , Maire , E. and Adrien , J. 2010 Characterization and modeling of void nucleation by interface decohesion in dual phase steels Scripta Materialia 63 973 976
- Landron , C. , Maire , E. , Bouaziz , O. , Adrien , J. , Lecarme , L. and Bareggi , A. 2011 Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels Acta Materialia 59 7564 7573
- Landron , C. , Maire , E. , Adrien , J. , Bouaziz , O. , Di Michiel , M. , Cloetens , P. and Suhonen , H. 2012 Resolution effect on the study of ductile damage using synchrotron x-ray tomography Nuclear Instruments and Methods in Physics Research B 284 15 18
- Ragab , A.R. 2004 Application of an extended void growth model with strain hardening and void shape evolution to ductile fracture under axisymmetric tension Engineering Fracture Mechanics 71 1515 1534
- ABAQUS version 6.10 User's Manual 2010 Hibbit, Karlsson & Sorensen, Inc. Providence, Rhode Island, USA
- Konieczny , A. and Henderson , T. On Formability Limitations in Stamping Involving Sheared Edge Stretching SAE Technical Paper 2007-01-0340 2007 10.4271/2007-01-0340
- Sriram , S. , Wong , C. , Huang , M. , Yan , B. and Urban , D. Formability characterization of a new generation of high strength steels Report No. 0012 American Iron and Steel Institute Technology Roadmap Program Office Pittsburgh, PA, USA 2003
- Pradhan , R. , Kelley , S. , Fraley , R. , and Layland , J. Some Performance Aspects of Dual-Phase Steels in Comparison to HSLA, C-Mn and TRIP Steels SAE Technical Paper 2004-01-0505 2004 10.4271/2004-01-0505
- Ilinich , A. , Smith , L. , and Golovashchenko , S. Analysis of Methods for Determining Sheared Edge Formability SAE Technical Paper 2011-01-1062 2011 10.4271/2011-01-1062