This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fe-Si Sintered Alloy for use in Exhaust Applications
Technical Paper
2013-01-1154
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
As a result of the wide range of operating environments, component parts of automotive and commercial engine exhaust systems require a unique combination of material properties that are not easily met using existing wrought, cast, or powder metallurgy alloys. Alpha Sintered Metals (ASM) now offers a new Powder Metal (PM) alloy with improved hot oxidation properties that not only supplements the application of traditional stainless steel alloys but also enhances the service life reliability of these components for elevated exhaust temperature applications.
ASM's new alloy named Alphaloy, demonstrates material property advantages for several critical exhaust system attributes. The test results of studies comparing Alphaloy to other traditional materials exhibit improved performance relative to hot oxidation resistance, tensile strength and machinability while maintaining consistent performance for thermal expansion, atmospheric corrosion and weldability. Alphaloy's excellent resistance to degradation from thermal cycling offers dramatic performance improvement over 400 series stainless steel materials.
The paper also reviews and discusses some current exhaust industry practices that promote improved sealing and longer useful life requirements. Furthermore, progressive emission reduction initiatives will increase demand for PM flanges in fabricated manifolds, complex diesel after treatment systems such as Diesel Oxidation Catalyst (DOC) and Selective Catalytic Reduction (SCR) and new cooled Exhaust Gas Recirculation (EGR) systems. Alphaloy's unique combination of physical and mechanical properties is ideal for many of these applications.
Recommended Content
Authors
Topic
Citation
Cornelio, T., Schloder, M., O'Neill, M., Bowyer, S. et al., "Fe-Si Sintered Alloy for use in Exhaust Applications," SAE Technical Paper 2013-01-1154, 2013, https://doi.org/10.4271/2013-01-1154.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 |
Also In
References
- http://www.mpif.org/
- http://www.hoeganaes.com
- www.ospreyexhaustcomponents.co.uk
- http://cfr.regstoday.com
- http://ecfr.gpoaccess.gov
- ASTM E228
- Chang , D. , Nees , R. , and Morin , M. Application of Hydroforming Technology for Exhaust Manifolds SAE Technical Paper 960804 1996 10.4271/960804
- Shimamoto , T. , Asano , K. , Shioya , Y. , and Ando , S. Development of the Stainless Cast-Steel Exhaust Manifold SAE Technical Paper 930621 1993 10.4271/930621
- Hwang , I. , Myung , C. , Park , S. , In , C. et al. Theoretical and Experimental Flow Analysis of Exhaust Manifolds for PZEV SAE Technical Paper 2007-01-3444 2007 10.4271/2007-01-3444
- Santacreu , P. , Cleizergues , O. , Simon , C. , and Duroux , P. Design of Stainless Steel Automotive Exhaust Manifolds SAE Technical Paper 2003-01-2848 2003 10.4271/2003-01-2848
- Mamiya , N. , Masuda , T. , and Noda , Y. Thermal Fatigue Life of Exhaust Manifolds Predicted by Simulation SAE Technical Paper 2002-01-0854 2002 10.4271/2002-01-0854
- Chinouilh , G. , Santacreu , P. , and Herbelin , J. Thermal Fatigue Design of Stainless Steel Exhaust Manifolds SAE Technical Paper 2007-01-0564 2007 10.4271/2007-01-0564
- Santanam , C. , Priebe , D. , Scofield , T. , and Grable , K. Design of a Dual Wall Air Gap Exhaust Manifold SAE Technical Paper 980045 1998 10.4271/980045
- Park , S. , Kim , J. , Kim , H. , Ko , S. et al. Development of a Heat Resistant Cast Iron Alloy for Engine Exhaust Manifolds SAE Technical Paper 2005-01-1688 2005 10.4271/2005-01-1688
- Watanabe , Y. , Shiratani , K. , Iwanaga , S. , and Nishino , K. Thermal Fatigue Life Prediction for Stainless Steel Exhaust Manifold SAE Technical Paper 980841 1998 10.4271/980841
- Dropps , S. , Khalaf , F. , and Whittle , B. Redesign of an Exhaust Manifold Outlet Fastener Using Robust Design Techniques SAE Technical Paper 2000-01-0917 2000 10.4271/2000-01-0917
- Santacreu , P. , Saedlou , S. , FAIVRE , L. , ACHER , A. et al. Ferritic Stainless Steel Grade with Improved Durability for High Temperature Exhaust Manifold SAE Technical Paper 2011-01-0194 2011 10.4271/2011-01-0194
- Chen , P. , Lyons , R. , Rakoczy , M. , Otsuka , K. et al. Development of the 6.8L V10 Heat Resisting Cast-Steel Exhaust Manifold SAE Technical Paper 962169 1996 10.4271/962169
- Benajes , J. , Reyes , E. , Bermudez , V. , and Serrano , J. Pre-design Criteria for Exhaust Manifolds in I.C. Automotive Engines SAE Technical Paper 980783 1998 10.4271/980783
- Sasaki , N. and Tordoff , W. Mass-Production Process for Thin-Walled Cast Stainless Steel Exhaust Manifolds SAE Technical Paper 2001-01-3362 2001 10.4271/2001-01-3362
- Meda , L. , Shu , Y. , and Romzek , M. Exhaust System Manifold Development SAE Technical Paper 2012-01-0643 2012 10.4271/2012-01-0643
- Schuerholz , S. , Ellmer , D. , and Siemund , S. Exhaust Gas Management SAE Technical Paper 2004-01-0647 2004 10.4271/2004-01-0647
- SAE International Surface Vehicle Standard High Temperature Materials for Exhaust Manifolds SAE Standard J2515 Aug. 1999