This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of Thermal Load for Dry Clutch under the Frequent Launching Condition
Technical Paper
2013-01-0814
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
According to the structural features and working characteristics of the dry clutch, this study focuses on the factors that affect the performance and life of the dry clutch. The temperature rise caused by the clutch slipping was proved as the key factor. Dynamics model of the powertrain for the dry clutch in launching process was established, and friction work generated during the launching process was simulated and calculated. Based on the basic theory of heat transfer, this paper defined the boundary conditions of the temperature field and the finite element model for the dry clutch was built. The transient temperature field of the friction disk, temperature field changes under the frequent starting conditions and the effects of friction material on temperature rise were analyzed, and measures were proposed to reduce the temperature of dry clutch from its design, use and control.
Recommended Content
Technical Paper | Transient Flow Field Analysis Around a Lockup Clutch Inside a Torque Converter |
Technical Paper | Modeling and Drivability Assessment of a Single-Motor Strong Hybrid at Engine Start |
Technical Paper | Toyota’s New Hybrid Unit “L4A0” |
Authors
Citation
Sun, S., Lei, Y., Fu, Y., Yang, C. et al., "Analysis of Thermal Load for Dry Clutch under the Frequent Launching Condition," SAE Technical Paper 2013-01-0814, 2013, https://doi.org/10.4271/2013-01-0814.Also In
References
- Jianguo , Zhang , Yulong , Lei , Hongbo , Liu , Junjie , Zhang , and Zhengcai , Yu Rapid control prototyping of dry dual clutch transmission and platform test Journal of Jilin University(Engineering and Technology Edition) 2010 40 4 901 905
- Yulong , Lei , Anlin , Ge , YongJun , Li , and Mingkui , Niu Automamatic Mechanical transmission control in Starting Process Chinese Journal of Mechanical Engineering 2000 36 5 69 71
- Przybilla , M. , Kunze , C. , Celik , S. , and Dongaonkar , S. Combined Simulation Approach For Dry Clutch Systems SAE Technical Paper 2011-01-1232 2011 10.4271/2011-01-1232
- Xin , Zheng , Shenglong , Cai , and Li , Chen A Simulation Study of the Temperature Field of A DCT Under the Frequent Shifting Condition Drive System Technique 2011 25 3 11 17
- Mingkui , Niu Research on Clutch Temperature Model and Gray Predication Control of Dry DCT Changchun College of Automotive Engineering, Jilin University 2008 2010
- Saito , T. , Kotegawa , T. , Matsuura , Y. , Tanaka , S. et al. Study of Durability Prediction with Focus on Wear Properties for Multiple Plate Clutches SAE Technical Paper 2007-01-0240 2007 10.4271/2007-01-0240
- Anlin , Ge Theory and Design of Automatic Transmission China Machine Press 1991 2010
- Yulong , Lei , Anlin , Ge , and YongJun , Li Clutch Control Strategy in Starting Process Automotive Engineering 2000 22 4 266 269
- Yunfei , Deng Research on Finite Element Analysis of Dry Double-Clutch Thermal Properties Changchun College of Automotive Engineering, Jilin University 2008 2006
- Yanyang , Qu Research of Clutch Temperature in Mini Vehicle Wuhan College of Mechanical and Electronic Engineering, Wuhan University of Technology 2008 2011
- Zhenjun , Liu , Yingying , Wang , and Datong , Qin A Simulation Study of Transient Thermal Load of a Friction Pair in DCT China Mechanical Engineering 2009 20 14 1753 1757
- Huang , Y. and Chen , S. Analytical Study of Design Parameters on Cooling Performance of a Brake Disk SAE Technical Paper 2006-01-0692 2006 10.4271/2006-01-0692
- Wangyu , Wang Automobile Design China Machine Press 2011 06 01