This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Comparative Life Cycle Assessment of Magnesium Front End Autoparts: A Revision to 2010-01-0275
Technical Paper
2012-01-2325
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The Magnesium Front End Research and Development (MFERD) project under the sponsorship of Canada, China, and USA aims to develop key technologies and a knowledge base for increased use of magnesium in automobiles. The primary goal of this life cycle assessment (LCA) study is to compare the energy and potential environmental impacts of advanced magnesium based front end parts of a North American-built 2007 GM-Cadillac CTS using the current steel structure as a baseline. An aluminium front end is also considered as an alternate light structure scenario. A “cradle-to-grave” LCA is conducted by including primary material production, semi-fabrication production, autoparts manufacturing and assembly, transportation, use phase, and end-of-life processing of autoparts. This LCA study was done in compliance with international standards ISO 14040:2006 [1] and ISO 14044:2006 [2]. While weight savings result in reductions of energy use and climate change emissions during the use phase of the car, the impacts of autoparts manufacturing and end of life recycling phases of lightweight autoparts designs are substantial as well. Pathways for improving sustainability of magnesium use in automobiles through material management and technology improvements including recycling are also discussed. Mg lightweight designs contribute to the largest use phase total primary and climate change savings over the vehicle's life time. Sustainably manufactured and recycled large magnesium structural parts can provide environmental benefits in terms of climate change emissions and consequently energy use vis-à-vis steel within the expected life of the vehicle. Overall, the aluminum lightweight design showed the best breakeven vehicle distance travelled from primary energy use and climate change perspectives within the vehicle's life time.
Recommended Content
Authors
Topic
Citation
Dubreuil, A., Bushi, L., Das, S., Tharumarajah, A. et al., "A Comparative Life Cycle Assessment of Magnesium Front End Autoparts: A Revision to 2010-01-0275," SAE Technical Paper 2012-01-2325, 2012, https://doi.org/10.4271/2012-01-2325.Also In
References
- International Standard “Environmental Management - Life Cycle Assessment - Principles and Framework,” ISO 14040:2006 2006
- International Standard “Environmental Management - Life Cycle Assessment - Requirements and Guidelines,” ISO 14044:2006 2006
- Nyberg, E. A. Luo, A. A. Sadayappan, K. Shi, W. “Magnesium for Future Autos,” Advanced Materials & Processes 166 10 35 37 2008
- Luo, A. A. Nyberg, E. A. Sadayappan, K. Shi, W. “Magnesium Front End Research and Development: A Canada-China-USA Collaboration,” Magnesium Technology Conference New Orleans, LA, USA March 9 13 2008
- Aghion, E. Bartos, S. C. “Comparative Review of Primary Magnesium Production Technologies as Related to Global Climate Change,” 65 th Annual World Magnesium Conference Warsaw, Poland May 18 20 2008
- Luo, A AMD 603- Magnesium Front End Design and Development Automotive Lightweighting Materials, FY 2007 Annual Report 2007
- Das, S. Dubreuil, A. Bushi, L. Tharumarajah, A. “A Life Cycle Assessment of a Magnesium Automotive Front End,” TMS Annual Meeting, 2009 179 184 2009
- Koffler, Ch. Rohde-Brandenburger, K. “On the Calculation of Fuel Savings through Lightweight Design in Automotive Life Cycle Assessments,” International Journal of Life Cycle Assessment 15 1 128 135 2010
- EPA's FTP-75 and HWFET driving cycles http://www.epa.gov/oms/emisslab/methods/ftpdds.gif http://www.dieselnet.com/standards/cycles/hwfet.html
- Personal communication with Koffler. Ch. 2012
- Geyer, R. Life cycle greenhouse gas emission assessments of automotive materials-The example of mild steel, advanced high strength steel and aluminium in body in white applications Methodology report 2007
- Institute for Energy- and Environmental Research (IFEU) Energy savings by light-weighting Final report 2003
- Song, S. Schmid, S. A. Beeh, E. Ehrenberger, S. I. Friedrich, H. E. “Magnesium in Automotive Applications: New Concepts and Barriers for their Use Due to Up-Stream Life-Cycle CO 2eq Emissions,” International Magnesium Association 2009 Taiyuan Global Magnesium Conference and Exhibition April 9 2009
- Argonne National Laboratory “The Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) Model,” http://www.transportation.anl.gov/modeling_simulation/GREET/ September 2009
- U.S. EPA “MOBILE6 Vehicle Emission Modeling Software,” http://www.epa.gov/otaq/m6.htm September 2009
- Dubreuil, A. Young, S.B. Atherton, J. Gloria, T. P. “Metals Recycling Maps and Allocation Procedures in Life Cycle Assessment,” International Journal of Life Cycle Assessment 15 7 621 631 2010
- Gesing, A. J. Dubreuil, A. “Recycling of Post-Consumer Mg Scrap,” 65 th Annual World Magnesium Conference Warsaw, Poland May 18 20 2008
- Koltun, P. Tharumarajah, A. Ramakrishnan, S. “Life Cycle Environmental Impact of Magnesium Automotive Components,” Magnesium Technology 2005 43 48 2005
- National Renewable Energy Laboratory “U.S. Life-Cycle Inventory Database,” http://www.nrel.gov/lci/ September 2009
- ecoinvent “Life Cycle Inventory Database,” http://www.ecoinvent.org/database/ September 2009
- International Magnesium Association 2010 http://www.intlmag.org/files/yend2008r.pdf
- Ramakrishnan, S. Koltun, P. “Global Warming Impact of the Magnesium Produced in China Using the Pidgeon Process,” Resources, Conservation and Recycling 42 1 49 64 2004 10.1016/j.resconrec.2004.02.003
- Xianzheng, G. Zuoren, N. Zhihong, W. 2006 Research and development of Chinese LCA database Beijing University of Technology, Eco-materials Institute Center for Materials LCA
- International Aluminium Institute “Life Cycle Assessment of Aluminium: Inventory Data for the Primary Aluminium Industry Year 2005 Update,” http://www.world-aluminium.org/UserFiles/File/LCA.pdf September 2009
- European Aluminium Association “Environmental Profile Report for the European Aluminium Industry - April 2008 - Life Cycle Inventory Data for Aluminium Production and Transformation Processes in Europe,” http://www.eaa.net/upl/4/default/doc/EAA_Environmental_profile_report_May08.pdf September 2009
- Reppe, P. Keoleian, G. Messick, R. Costic, M. “Life Cycle Assessment of a Transmission Case: Magnesium vs. Aluminum,” SAE Technical Paper 980470 1998 10.4271/980470
- Das, S. “Life Cycle Energy Impacts of Automotive Liftgate Inner,” Resources, Conservation and Recycling 43 4 375 390 2005 10.1016/j.resconrec.2004.07.003
- International Aluminium Institute “Global Aluminium Recycling: A Cornerstone of Sustainable Development,” http://www.world-aluminium.org/cache/fl0000181.pdf December 2009
- Shukun, M. Xiuming, W. Jinxiang, X. “China's Magnesium Industry Development Status in 2007,” 65 th World Magnesium Conference Warsaw, Poland May 18 20 2008
- Ehrenberger, S. I. Schmid, S. A. Song, S. Friedrich, H. E. “Status and Potentials of Magnesium Production in China: Life Cycle Analysis Focusing on CO 2eq Emissions,” 65 th Annual World Magnesium Conference Warsaw, Poland May 18 20 2008
- Gao, F. Nie, Z. Wang, Z. Gong, X. Zuo, T. “Life Cycle Assessment of Primary Magnesium Production Using the Pidgeon Process in China,” International Journal of Life Cycle Assessment 14 5 480 489 2009 10.1007/s11367-009-0101-9
- USGS “2007 Annual Yearbook Magnesium [Advanced Release],” http://minerals.usgs.gov/minerals/pubs/commodity/magnesium/myb1-2007-mgmet.pdf September 2009
- Javaid, A. Essadiqi, E. Bell, S. Davis, B. “Literature Review on Magnesium Recycling,” TMS 2006 Annual Meeting San Antonio, TX Magnesium Technology 2006 7 12 2006
- Gesing, A. Gesing Consultants Inc. personal conversation November 2007