This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Deactivation of Urea SCR Catalyst for Heavy Duty Diesel Engine
Technical Paper
2012-01-1956
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The Urea-SCR system has been widely used for the after-treatment of NOx to meet tighter regulations for the heavy-duty diesel engine. In addition, the long useful life time of heavy duty engines requires the highly durable components of urea-SCR system such as the catalyst and urea-dosing unit.
This paper focused on the deactivation of the SCR catalyst for the EURO4 engine. The NOx conversion of field-aged catalysts was monitored with certain mileage accumulation at the engine bench and laboratory reactors. The postmortem analysis of the catalysts has been carried out to investigate the possible deactivation routes of SCR catalysts in the real driving condition. The analysis showed that the SCR catalyst was durable enough to meet the legislations over the useful lifetime of the engine and found that the non-thermal mechanisms such as poisoning were major routes for the deactivation of catalysts while the thermal sintering was shown to be marginal.
Based on these results, the rapid aging modes have been considered as the fast development tools that can replace time-consuming and costly field-aging processes.
Recommended Content
Authors
Topic
Citation
Cho, Y., Ha, J., Lee, T., and Han, H., "Deactivation of Urea SCR Catalyst for Heavy Duty Diesel Engine," SAE Technical Paper 2012-01-1956, 2012, https://doi.org/10.4271/2012-01-1956.Also In
References
- Heck, R. M. Farrauto, R. J. Catalytic Air Pollution Control Van Nostrand Reinhold New York 1995
- Twigg, M. Collins, N. Morris, D. O'Connell, T. et al. “The Effect of Phosphorus and Boron Lubricant Oil Additives on Catalyst and Engine Durability,” SAE Technical Paper 2004-01-1888 2004 10.4271/2004-01-1888
- Xu, L. McCabe, R. Hubbard, C. Dennis, R. et al. “Impact of Oil Consumption Modes and Pathways on Oil-Derived Catalyst Deposits,” SAE Technical Paper 2007-01-1072 2007 10.4271/2007-01-1072
- German, R. M. Powder Metallurgy Science German, R. M. Metal Powder Industry Federation Princeton, U. S. A 1994 50
- Turco, M. Bagnasco, G. Russo, G Ciambelli, P. Patrono, P. Massucci, M. A. Vecchio, S. “NH3 TPD study and thermal behaviour of vanadium-exchanged titanium phosphates as catalysts,” Journal of thermal analysis 47 1 215 225 0368 4466