This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Predicting Weight Distribution from Occupant Load Using a Monte Carlo Method
Technical Paper
2012-01-1925
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The Federal Aviation Administration (FAA) and Coast Guard recently adapted increases in the average passenger weight used to calculate load and conduct safety analysis and tests in multiple modes of transportation. The Federal Transit Authority (FTA) has proposed similar measures. The increased passenger weight requirements were created in response to the Center for Disease Control's (CDC) documented rise in weight among the country's citizens and followed crash or failure incidents in which a cause was overweight equipment. The current certification requirements under CFR 49, Part 567 state that Gross Vehicle Weight Rating (GVWR) of a motor vehicle shall not be less than the sum of the unloaded vehicle weight, rated cargo weight and 150 pounds (68 kg) times the number of designated seating positions. Actual occupant weight distributions versus certified weight per occupant seat causes a potential conflict between a vehicle's in-use weight versus its certified GVWR. A Monte Carlo method using a midsized bus example was conducted to determine the statistical probability that adult passengers and rated cargo would result in weight distributions that exceeded tire load capability, Gross Axle Weight Rating (GAWR), or GVWR. A discrete distribution of occupant weight modeled on the 2006 CDC anthropometric reference data was utilized. The analysis examined buses loaded with fewer occupants than seating positions by assuming a uniform probability that a seat would be occupied. Results demonstrated that load conditions and usage restrictions can be identified that decrease the probability of operating in a condition that exceeds a weight rating.
Recommended Content
Topic
Citation
Arndt, M., "Predicting Weight Distribution from Occupant Load Using a Monte Carlo Method," SAE Technical Paper 2012-01-1925, 2012, https://doi.org/10.4271/2012-01-1925.Also In
References
- CFR 49, Part 567, PART 567 - CERTIFICATION October 1 2009 206
- Federal Transit Administration Bus Testing; Calculation of Average Passenger Weight and Test Vehicle Weight, 49 CFR Part 665, [Docket No. FTA-2011-0015] Federal Register 76 49 March 14 2011 13580
- Stoudt, Howard W Damon, Albert McFarland, Ross Weight, Height, and Selected Body Dimensions of Adults, United States - 1960 - 1962 National Center for Health Statistics June 1965
- Tirrell, E. L. “Weight Distribution of Motor Vehicles,” SAE Technical Paper 340013 1934 10.4271/340013
- FMVSS 110, Tire selection and rims and motor home/recreation vehicle trailer load carrying capacity information for motor vehicles with kilograms (10,000 pounds) or less, CFR 49 571.110, downloaded 6/22/2011
- U.S. Department of Transportation, Federal Aviation Administration, Flight Standards Service Advisory Circular, Aircraft Weight and Balance Control, AC 120-27D August 11 2004
- Centers for Disease Control and Prevention (CDC). National Center for Health Statistics (NCHS). National Health and Nutrition Examination Survey Data (NHANES). Hyattsville, MD: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention 2003 2006 http://www.cdc.gov/nchs/nhanes.htm
- U.S. Department of Transportation, Federal Aviation Administration, Flight Standards Service Advisory Circular, Aircraft Weight and Balance Control, AC 120-27E June 10 2005
- Department of Homeland Security Coast Guard, Passenger Weight and Inspected Vessel Stability Requirements; Final Rule Federal Register 75 239 78064 December 14 2010
- U.S. Department of Transportation, Federal Transit Administration Bus Testing; Calculation of Average Passenger Weight and Test Vehicle Weight, Docket No. FTA-2011-0015 Federal Register 78 49 13580 March 14 2011
- McDowell, Margaret A. et.al. Anthropometric Reference Data for Children and Adults: United States, 2003-2006, National Health Statistics Reports, Number 10 October 22 2008
- MSBMA Recommended Practice 001, Weight Distribution and Payload, Orig. 9-10-97 1 31 07
- Part 571 Federal Motor Vehicle Safety Standards, Definitions, CFR 49 Part 571.3, revision as of October 31, 2010
- Water Dummy Mass Characteristics, D.O.T. Docket No. NHTSA- 2001- 9663-74 December 24 2002
- Bartlett, W. “Conducting Monte Carlo Analysis with Spreadsheet Programs,” SAE Technical Paper 2003-01-0487 2003 10.4271/2003-01-0487
- Sparks, L. “Utility Vehicle Weight Problems and Design Considerations,” SAE Technical Paper 902241 1990 10.4271/902241
- NTEA Weight Distribution & Center of Gravity Calculation NTEA Software, Product #1028
- National Health and Nutrition Examination Survey (NHANES) Anthropometry Procedures Manual January 2007 3-3
- King, Halsey Exceeding the Gross Vehicle Weight on a Bus January 5 2005 http://www.wstip.org/ASK%20Library/Policies%20regarding%20GVW.pdf April 13 2012