This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of Reduction for Brake Squeal in Disc In-Plane Mode
Technical Paper
2012-01-1825
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Brake squeal is a phenomenon of self-induced vibration of the brake components during braking. There are many kinds of brake squeal cases whose mechanisms require acting on a various number of potential root causes. Brake squeal phenomena can be generally separated into 2 main mode types related to the direction of disc vibration involved: in-plane mode and out-of-plane mode. For out-of-plane mode, a number of existing countermeasures can be potentially applied after characterization of the squeal occurrence condition by direct experiment or simulation analysis[1,2,3,4]. However, as there are many possible mechanisms and root causes for the in-plane modes[5,6,7,8,9,10,11,12,13], it is generally necessary to perform a detailed analysis of the vibration mechanism before implementing a countermeasure. In this case, this paper reports a particular of in-plane brake squeal case where traditional countermeasure proved ineffective, but which could be solved by changing the disc design based on the comprehensive understanding of the mechanism.
Recommended Content
Technical Paper | Measurement and Analysis of Rotor In-plane Mode Induced Disc Brake Squeal and Beyond |
Technical Paper | An Experimental Set Up Development for Brake Squeal Basic Research |
Journal Article | A Study on Trigger of Disc Brake Squeal Generation |
Authors
Topic
Citation
Yokoyama, T., Matsushima, T., Matsui, N., and Misumi, R., "A Study of Reduction for Brake Squeal in Disc In-Plane Mode," SAE Technical Paper 2012-01-1825, 2012, https://doi.org/10.4271/2012-01-1825.Also In
References
- Millner, N. “An Analysis of Disc Brake Squeal,” SAE Technical Paper 780332 1978 10.4271/780332
- Matsushima, Toru Optimal Design Considering Robustness to Reduce Brake Squeal in Disc Brake System 9 th World Congress on Structural and Multidisciplinary Optimization
- Ishihara, N. Nishiwaki, M. Shimizu, H. “Experimental Analysis of Low-Frequency Brake Squeal Noise,” SAE Technical Paper 962128 1996 10.4271/962128
- Nishiwaki, Masaaki Sorimachi, Koji Langthjem, Mikael A. A study on Brake Noise of Low-Frequency Disc Brake Squeal and Moan Noise JSAE No296-20125062
- Papinniemi, A. Zhao, J. Stanef, D. Ding, J. “An Investigation of In-Plane Vibration Modes in Disc Brake Squeal Noise,” SAE Technical Paper 2005-01-3923 2005 10.4271/2005-01-3923
- Talbot, C. Fieldhouse, J. “Investigations of In-Plane Disc Vibration Using Laser Holography,” SAE Technical Paper 2002-01-2607 2002 10.4271/2002-01-2607
- Yang, M. Afaneh, A. Blaschke, P. “A Study of Disc Brake High Frequency Squeals and Disc In-Plane/Out-of-Plane Modes,” SAE Technical Paper 2003-01-1621 2003 10.4271/2003-01-1621
- Chen, F. Mckillip, D. Luo, J. Wu, S. “Measurement and Analysis of Rotor In-plane Mode Induced Disc Brake Squeal and Beyond,” SAE Technical Paper 2004-01-2798 2004 10.4271/2004-01-2798
- Baba, H. Wada, T. Takagi, T. “Study on Reduction of Brake Squeal Caused by In-plane Vibration on Rotor,” SAE Technical Paper 2001-01-3158 2001 10.4271/2001-01-3158
- Joo, S. Han, J. Kim, J. Park, K. “High Frequency Brake Squeal Prediction Index for Disc In-plane Mode,” SAE Technical Paper 2009-01-2102 2009 10.4271/2009-01-2102
- Chen, F. Chen, S. Harwood, P. “In-Plane Mode/Friction Process & Their Contribution to Disc Brake Squeal at High Frequency,” SAE Technical Paper 2000-01-2773 2000 10.4271/2000-01-2773
- Misumi, Ryutaro Matsushima, Toru Investigation of Disc In-plane Mode Induced Brake Squeal JSAE No20115676
- Fieldhouse, J. Bryant, D. Talbot, C. “The Influence of Pad Abutment on Brake Noise Generation,” SAE Technical Paper 2011-01-1577 2011 10.4271/2011-01-1577
- Malosh, J. “Disc Brake Noise Reduction Through Metallurgical Control of Rotor Resonances,” SAE Technical Paper 982236 1998 10.4271/982236
- Yang, F. Tan, C. Chen, F. “Identification of In-Plane and Out-of-Plane Modal Coupling Mechanism in Brake Squeal by the Empirical Mode Decomposition Method,” SAE Technical Paper 2003-01-0682 2003 10.4271/2003-01-0682
- Fieldhouse, J. “A Proposal to Predict the Noise Frequency of a Disc Brake Based on the Friction Pair Interface Geometry,” SAE Technical Paper 1999-01-3403 1999 10.4271/1999-01-3403
- Chang, W. Shi, T. “Early Noise Analysis for Robust Quiet Brake Design,” SAE Technical Paper 2009-01-0858 2009 10.4271/2009-01-0858
- Dupac, M. Biswas, C. “A Study of Noise Reduction by Damping Layer Materials,” SAE Technical Paper 2007-01-3954 2007 10.4271/2007-01-3954
- Griffen, C. Weick, J. “Development of Cold Noise Brake Insulator Solutions,” SAE Technical Paper 2009-01-3035 2009 10.4271/2009-01-3035
- Nishiwaki, M. Abe, K. Yanagihara, H. Stankovic, I. et al. “A Study on Friction Materials for Brake Squeal Reduction by Nanotechnology,” SAE Technical Paper 2008-01-2581 2008 10.4271/2008-01-2581