This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Development of the DL Fuel Injector Atomizer with Active Droplet Coalescence Control for Port Fuel Injection Applications
Technical Paper
2012-01-1259
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The paper presents the background physics of droplet coalescence phenomena and the basic research carried on the topic by interactive use of high-level 3-D numerical simulation tools and high-level optical visualization and measurement techniques.
The presentation continues with the description of a new injector atomizer plate layout, which enables a physical coalescence control of the droplet population within the entire fuel spray.
Finally are presented examples of the impact on exhaust emissions of the introduction the new atomizer plate with coalescence control by engine test bed experiments (steady state low load conditions) and vehicle tests (first cold part of the FTP-cycle).
Recommended Content
Topic
Citation
Pontoppidan, M. and Montanari, G., "The Development of the DL Fuel Injector Atomizer with Active Droplet Coalescence Control for Port Fuel Injection Applications," SAE Technical Paper 2012-01-1259, 2012, https://doi.org/10.4271/2012-01-1259.Also In
References
- Amsden, A. A. O'Rourke, P.J. Butler, C.D. “KIVA II A Computer Program for Chemical Reactive Flows with Sprays,” Los Alamos National Labs.
- Amsden, A.A. O'Rourke, P.J. Butler, C.D. “KIVA III: A KIVA Program with Block Structured Mesh for Complex Geometries” Los Alamos National Labs.
- Bayvel, L. Orzechowski, Z. “Liquid Atomization” Taylor and Francis USA 1993
- Durst, F. Bobb, S. Krebs, H. Tropea, C. “Entwicklung und Anwendung motorenangepasster Laser-Doppler-Systeme fûr Turbulenzmessungen in Verbrennungsmotoren” 381 410 VDI Berichte 617 VDI Verlag 1986
- Dantec Dynamics A/S “BSA Flow Software Manual - Installation and User's Guide.” Version 4.10 - Publication 9040U5734 2006
- Hentschel, W. “Einsatz von Lasern in der Motormesstechnik und zur Visualisierung von Strömungen” 347 376 VDI Berichte 617 VDI Verlag 1986
- Hou, S. Schmidt, D. “Interaction Mechanisms between Closely Spaced Sprays,” SAE Technical Paper 2008-01-0946 2008 10.4271/2008-01-0946
- Hung, D. Zhu, G. Winkelman, J. Stuecken, T. et al. “A High Speed Flow Visualization Study of Fuel Spray Pattern Effect on Mixture Formation in a Low Pressure Direct Injection Gasoline Engine,” SAE Technical Paper 2007-01-1411 2007 10.4271/2007-01-1411
- Mitroglou, N. Nouri, J. Yan, Y. Gavaises, M. et al. “Spray Structure Generated by Multi-Hole Injectors for Gasoline Direct-Injection Engines,” SAE Technical Paper 2007-01-1417 2007 10.4271/2007-01-1417
- Patent file Number EP08162767.1 August 2008
- Pontoppidan, M. Bella, G. Rocco, V. “Mixture formation in SI-Engine intake Systems - A simplified theoretical Model with Experimental Verification.” ASME 1996 Spring Congress
- Pontoppidan, M. Gaviani, G. Bella, G. Rocco, V. “Direct Fuel Injection - A Study of Injector Requirements for Different Mixture Preparation Concepts,” SAE Technical Paper 970628 1997 10.4271/970628
- Pontoppidan, M. Gaviani, G. Bella, G. Rocco, V. “Improvements of GDI-Injector Optimization Tools for Enhanced SI-Engine Combustion Chamber Layout,” SAE Technical Paper 980494 1998 10.4271/980494
- Pontoppidan, M. Gaviani, G. Bella, G. Schilardi, M. et al. “Enhanced Mixture Preparation Approach for Lean Stratified SI-Combustion by a Combined Use of GDI and Electronically Controlled Valve-Timing,” SAE Technical Paper 2000-01-0532 2000 10.4271/2000-01-0532
- Pontoppidan, M. “Combined use of 3D-CFD Simulation and direct Visualization Techniques to decrease the Optimization Procedure Complexity of Combustion chamber Layout and Engine Control Pre-mapping operation necessary for Online Engine Test rig Optimization.” Internationales Symposium für Verbrennungsdiagnostik 2002 Baden-Baden 137 147
- Pontoppidan, M. Ausiello, F. Bella, G. Demaio, A. “Study of the Impact of Variations in the Diesel-Nozzle Geometry Parameters on the Layout of Multiple Injection Strategy,” SAE Technical Paper 2002-01-0217 2002 10.4271/2002-01-0217
- Pontoppidan, M. Gaviani, G. Bella, G. De Maio, A. “Direct Injection for Future SI-Engines - Stand Alone Combustion Layout or Integrated Part of Multi-Function Fuel/Air Management Approach?,” SAE Technical Paper 2003-01-0540 2003 10.4271/2003-01-0540
- Pontoppidan, M. Gaviani, G. Bella, G. De Maio, A. “Optimization by CFD Simulation of Spray Formation Parameters to Adapt Direct Injection High-Pressure Fuel Injectors to High-Speed SI-Engines,” SAE Technical Paper 2004-01-0539 2004 10.4271/2004-01-0539
- Pontoppidan, M. Bonfiglioli, S. Damasceno, F. Montanari, G. “Mixture Preparation Optimization by CFD of a Flex-Vehicle (Gasoline/Ethanol) Intake System Layout,” SAE Technical Paper 2004-01-3313 2004 10.4271/2004-01-3313
- Pontoppidan, M. Bonfiglioli, S. Montanari, G. Damasceno, F. et al. “Description of preliminary Study for Technology Transfer of an Ethanol Mixture Preparation System from Automotive Application to a 4-Cylinder 5.9 liter Aircraft Engine.,” SAE Technical Paper 2006-01-2878 2006 10.4271/2006-01-2878
- Pontoppidan, M. Bonfiglioli, S. Montanari, G. “Presentation of the new third Generation “Green” injector Family, PICO-ECOlogical, developed for further Improvement of Flex-fuel Engine Performance.,” SAE Technical Paper 2007-01-2749 2007 10.4271/2007-01-2749
- Pontoppidan, M. Damasceno, F. “The Integral Flex-Vehicle Mixture Control of Alcohol-Based Bio-Fuels - A New Challenge for Fuel-Atomizer Optimization,” SAE Technical Paper 2008-01-0437 2008 10.4271/2008-01-0437
- Pontoppidan, M. Bonfiglioli, S. Montanari, G. “Analysis of the Capabilities of the new innovative Ethanol Low-Temperature Mixture Preparation Device ECS.,” SAE Technical Paper 2008-36-0080 2008 10.4271/2008-36-0080
- Pontoppidan, M. Montanari, G. Damasceno, F. “Analysis of the Physical Boundary Conditions for the Layout of an Optimized Ethanol Low-Temperature Mixture Preparation Device,” SAE Technical Paper 2009-01-0618 2009 10.4271/2009-01-0618
- Pontoppidan, M. Montanari, G. “New developments of the 3 rd generation SFS-Flex system to meet PL5/6 emission requirements.,” SAE Technical Paper 2009-36-0159 2009 10.4271/2009-36-0159
- Pontoppidan, M. Montanari, G. “Introduction of Virtual Spray Vessel (VSV) simulation approach to improve the optimization level of mass-produced 3 rd generation fuel injectors for SFS-Flex fuel systems.,” SAE Technical Paper 2010-36-0137 2010 10.4271/2010-36-0137
- Pontoppidan, M. Montanari, G. “New Innovative Simulation Tool, the Virtual Spray Vessel (VSV), to Improve the Characterization and Spray Stability of Mass Produced Fuel Injectors,” SAE Technical Paper 2011-01-0380 2011 10.4271/2011-01-0380
- Schöppe, D. Greff, A. Zhang, H. Frenzel, H. Rôsel, G. Achleitner, E. Kapphan, F. “Anforderungen an zukünftige Otto DI-Einspritzsysteme und entsprechende Plattformlösungen” 32 Internationales Wiener Motorensymposium 235 249 VDI Verlag 2011
- Taylor, C. F. “The internal combustion engine in theory and practice” 2 214 238 MIT Press 1995
- Turns, S. R. “An introduction to combustion” 300 353 McGraw-Hill 1996
- Warga, J. Pauer, T. Boecking, F. Gerhard, J. Leonhard, F. “Konsequente Weiterentwicklung der Hochdruck- PKW-Dieseleinspritzsysteme” 32 Internationales Wiener Motorensymposium 214 234 VDI Verlag 2011