Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Effect of a Deformable Roller on Residual Stress Distribution for Elastic-Plastic Flat Plate Rolling under Plane Strain Conditions

Journal Article
2012-01-0190
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2012-01-0190
Published April 16, 2012 by SAE International in United States
Effect of a Deformable Roller on Residual Stress Distribution for Elastic-Plastic Flat Plate Rolling under Plane Strain Conditions
Sector:
Citation: Ali, M. and Pan, J., "Effect of a Deformable Roller on Residual Stress Distribution for Elastic-Plastic Flat Plate Rolling under Plane Strain Conditions," SAE Int. J. Mater. Manf. 5(1):129-142, 2012, https://doi.org/10.4271/2012-01-0190.
Language: English

References

  1. Love, R. J. Waistall, D. N. “The Improvement in the Bending Fatigue Strength of Production Crankshafts by Cold Rolling,” M.I.R.A. Report No. 1954/1 1 8 1954
  2. Spiteri, P. Ho, S. Lee, Y. L. “Assessment of Bending Fatigue Limit for Crankshaft Sections with Inclusion of Residual Stresses,” Int. J. Fatigue 29 318 329 2007 10.1016/j.ijfatigue.2006.03.009
  3. Choi, K. S. Pan, J. Ho, S. “Fatigue Failures of Rollers in Crankshaft Fillet Rolling,” SAE Technical Paper 2004-01-1498 2004 10.4271/2004-01-1498
  4. Chien, W. Y. Pan, J. Close, D. Ho, S. “Fatigue Analysis of Crankshaft Sections under Bending with Consideration of Residual Stresses,” Int. J. Fatigue 27 1 19 2005 10.1016/j.ijfatigue.2004.06.009
  5. Choi, K. S. Pan, J. “Simulations of Stress Distributions in Crankshaft Sections under Fillet Rolling and Bending Fatigue Tests,” Int. J. Fatigue 31 544 557 2009 10.1016/j.ijfatigue.2008.03.035
  6. Choi, K. S. Pan, J. “A Generalized Anisotropic Hardening Rule Based on the Mroz Multi-Yield-Surface Model for Pressure Insensitive and Sensitive Materials,” Int. J. of Plasticity 25 7 1325 1358 2009 10.1016/j.ijplas.2008.09.005
  7. Choi, K. S. Pan, J. Ho, S. “Effects of Roller Geometry on Contact Pressure and Residual Stress in Crankshaft Fillet Rolling,” SAE Technical Paper 2005-01-1908 2005 10.4271/2005-01-1908
  8. Ho, S. Lee, Y-L Kang, H.-T. Wang, C. J. “Optimization of a Crankshaft Rolling Process for Durability,” Int. J. Fatigue 31 799 808 2009 10.1016/j.ijfatigue.2008.11.011
  9. Mesarovic, S. Dj. Fleck, N. A. “Spherical Indentation of Elastic-Plastic Solids,” Proc. R. Soc. Lond. A 455 2707 2728 1999
  10. Kral, E. R. Komvopoulos, K. Bogy, D. B. “Elastic-Plastic Finite Element Analysis of Repeated Indentation of Half-Space by a Rigid Sphere,” J. Appl. Mech. 60 829 841 1993 10.1115/1.2900991
  11. Komvopoulos, K. “Elastic-Plastic Finite Element Analysis of Indented Layered Media,” J. Tribol. 111 3 430 439 1989 10.1115/1.3261943
  12. Merwin, J. E. Johnson, K. L. “An Analysis of Plastic Deformation in Rolling Contact,” Proc. Instn. Mech. Engrs. 177 25 676 690 1963
  13. Kulkarni, S. M. Hahn, G. T. Rubin, C. A. Bhargava, V. “Elastoplastic Finite Element Analysis of Three-Dimensional, Pure Rolling Contact at the Shakedown Limit,” J. Appl. Mech. 57 57 65 1990 10.1115/1.2888324
  14. Kulkarni, S. M. Hahn, G. T. Rubin, C. A. Bhargava, V. “Elasto-Plastic Finite Element Analysis of Three-Dimensional Pure Rolling Contact Above the Shakedown Limit,” J. of Appl. Mech. 58 347 353 1991 10.1115/1.2897192
  15. Yu, M. Moran, B. Keer, L. M. “A Direct Analysis of Two-Dimensional Elastic-Plastic Rolling Contact,” J. Tribol. 115 227 236 1993 10.1115/1.2920996
  16. Yu, M. M. H. Moran, B. Keer, L. M. “A Direct Analysis of Three-Dimensional Elastic-Plastic Rolling Contact,” J. Tribol. 117 234 243 1995 10.1115/1.2831236
  17. Bhargava, V. Hahn, G. T. Rubin, C. A. “An Elastic-Plastic Finite Element Model of Rolling Contact Part 1: Analysis of Single Contacts,” J. of Appl. Mech. 52 67 74 1985 10.1115/1.3169028
  18. Bhargava, V. Hahn, G. T. Rubin, C. A. “An Elastic-Plastic Finite Element Model of Rolling Contact Part 2: Analysis of Repeated Contacts,” J. of Appl. Mech. 52 75 82 1985 10.1115/1.3169030
  19. Chen, W. W. Wang, Q. J. Wang, F. Keer, L. M. Cao, J. “Three-Dimensional Repeated Elasto-Plastic Point Contacts, Rolling, and Sliding,” J. of Appl. Mech. 75 021021 2008 10.1115/1.2755171
  20. Jiang, Y. Sehitoglu, H. “Rolling Contact Stress Analysis with the Application of a New Plasticity Model,” Wear 191 35 44 1996 10.1016/0043-1648(95)06663-2
  21. Jiang, Y. Xu, B. Sehitoglu, H. “Three-Dimensional Elastic-Plastic Stress Analysis of Rolling Contact,” J. Tribol. 124 699 708 2002 10.1115/1.1491978
  22. Bijak-Zochowski, M. Marek, P. “Residual Stress in Some Elasto-Plastic Problems of Rolling Contact with Friction,” Int. J. Mech. Sci. 39 1 15 32 1997 10.1016/0020-7403(96)00018-5
  23. Ali, M. Y. Pan, J. “Elastic-Plastic Indentation and Flat Plate Rolling under Plane Strain Conditions,” SAE Int. J. Mater. Manuf. 4 1 125 137 2011 10.4271/2011-01-0035
  24. ABAQUS Version 6.8 User Manual SIMULIA Providence, RI 2008
  25. Ali, M. Y. Pan, J. Research work to be submitted for publication 2012
  26. Johnson, K. L “Contact Mechanics” Cambridge University Press 0-521-34796-3 1987

Cited By

Recommended Content

Technical Paper Incorporation of Boundary Conditions into Finite Element Analysis and the Physical Verification
Technical Paper Coupling of Finite Element and Energy Finite Element Solutions for Calculating the Vibration of Co-linear Beams in the Mid-Frequency Range
Technical Paper Effect of Epoxy-Based Structural Foam on Energy Management: An Experimental & Analytical Investigation