Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Temperature and Time Dependent Forming Limit Surface for Sheet Metal Forming at Elevated Temperatures

Journal Article
2012-01-0016
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/2012-01-0016
Published April 16, 2012 by SAE International in United States
A Temperature and Time Dependent Forming Limit Surface for Sheet Metal Forming at Elevated Temperatures
Sector:
Citation: Sheng, Z., "A Temperature and Time Dependent Forming Limit Surface for Sheet Metal Forming at Elevated Temperatures," SAE Int. J. Mater. Manf. 5(2):277-284, 2012, https://doi.org/10.4271/2012-01-0016.
Language: English

References

  1. Turetta, A Bruschi, S Ghiotti, A Investigation of 22MnB5 formability in hot stamping operations Journal of Materials Processing Technologies 177 2006 396 400
  2. Sheng, ZQ Shivpuri, R A hybrid process for forming thin-walled magnesium parts Mater. Sci. Eng. A 428 2006 180 187
  3. Tebbe, P Kridli, G Warm forming of aluminum alloys: an overview and future directions International Journal of Materials and Product Technology 21 1-3 2004
  4. Neugebauer, R Altan, T Geiger, M Kleiner, M Sterzing, A Sheet Metal Forming at Elevated Temperatures Annals of the CIRP 55 2 793 816
  5. Carpenter, J. Smith, MT Quick plastic forming of aluminum sheet metal December 2005 EERE Information Center, U.S. Department of Energy www.eere.energy.gov
  6. Oberpriller, B Burkhardt, L Griesbach, B Benchmark 3- Continuous press hardening, Numisheet 2008 September 1 5 2008 Interlaken, Switzerland
  7. Griesbach, B Oberpriller, B Simulation in tool and die shop, Numisheet 2008 September 1 5 2008 Interlaken, Switzerland
  8. Peng, YH Chang, QF Li, DY Numerical simulation of warm stamping of AZ31 Magnesium alloy sheet based on thermo-mechanical coupled method, Numisheet 2008 September 1 5 2008 Interlaken, Switzerland
  9. Hosford, WF Caddell, RM Metal forming mechanics and metallurgy second PTR Prentice Hall 1993
  10. Merklein, M Lechler, J Investigation of the thermo-mechanical properties of hot stamping steels J. Mater. Process. Technol. 177 2006 452 455
  11. Turetta, A Bruschi, S Ghiotti, A Investigation of 22MnB5 formability in hot stamping operations J. Mat. Proc. Technol. 177 2006 396 400
  12. Naka, T Torikai, G Hino, R Yoshida, F The effects of temperature and forming speed on the forming limit diagram for type 5083 aluminum-magnesium alloy sheet J. of Mat. Proc. Technol. 113 2001 648 653
  13. Doege, E DrÖder, K J.Mater. Process. Technol. 115 2001 14 19
  14. Naka, T Yoshida, F Deep drawability of type 5083 aluminum-magnesium alloy sheet under various conditions of temperature and forming speed J.Mater. Process. Technol. 89-90 1999 19 23
  15. Gutierrtz, m Tecnalia, L Material characterization for accurate simulation of new sheet metal forming processes, NAFEMS, sixth framework programme priority [6.2][sustainable surface transport] 3 April 2008
  16. Takuda, H Fujimoto, H Hatta, N Modelling on flow stress of Mg-Al-Zn alloys at elevated temperatures J. Mat. Proc. Technol. 80-81 1998 513 516
  17. Sheng, ZQ Shivpuri, R Modeling flow stress of magnesium alloys at elevated temperature Mater. Sci. Eng., A 419 2006 202 208
  18. Alexandrov, S Wang, PT Roadman, RE A fracture criterion of aluminum alloys in hot metal forming J. Mat. Proc. Technol. 160 2005 257 2
  19. Smallman, RE Bishop, RJ Modern Physical metallurgy & materials engineering Sixth 2002
  20. Lange, K Handbook of Metalforming McGraw-Hill Book Company 1985
  21. Gese, H Dell, H Numerical prediction of FLC with the program CRACH Proceedings of the FLC Zurich 2006 15 16 March 2006 IVP, ETH Zurich, Switzerland
  22. Abu-Farha, FK Shuaib, NA Khraisheh, MK Weinmann, KJ Limiting strains of sheet metals obtained by pneumatic stretching at elevated temperatures CIRP Annals-Manufacturing Technology 57 1 2008 275 278
  23. Sheng, ZQ Forming limit surface based system and method for determining fracture failure in sheet forming at elevated temperatures and different strain rates, provisional patent application, US61/504,184
  24. Kim, WJ Chung, SW Chung, CS Kum, D Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures Acta mater. 49 2001 3337 3345
  25. Taleff, EM Nevland, PJ Krajewski, PE Tensile ductility of several commercial aluminum alloys at elevated temperatures Metallurgical and Materials Transactions A 32 A May 2001 1119 1130
  26. Mabuchi, M Higashi, K Activation energy for superplastic flow in aluminum matrix composites exhibiting high-strain-rate superplasticity Scripta Materialia 34 12 1893 1897 1996
  27. Faraway, JJ Linear models with R Chapman & Hall/CRC 2005
  28. Barlart, F Glazov, MV Brem, JC Lege, DJ A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloys international Journal of Plasticity 18 2002 919 939
  29. Stoughton, T. Stress-Based forming limits in sheet-metal forming Journal of Engineering Materials and Technology 123 4 October 2001 417 422

Cited By

Recommended Content

Technical Paper Definitions and Methods for Worst Case Materials in Formability Simulations
Technical Paper Development of High Cr Sintered Stainless Steel with High Heat and Wear Resistance
Technical Paper Relationship between Material Properties and Local Formability of DP980 Steels