This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Modelling of Transport Phenomena in Diesel Sprays at Late-Cycle Post-Injection Conditions
Technical Paper
2011-24-0010
ISSN: 0148-7191, e-ISSN: 2688-3627
This content contains downloadable datasets
Annotation ability available
Sector:
Language:
English
Abstract
The development of diesel sprays at late-cycle post-injection conditions is numerically investigated using a dense-particle Eulerian-Lagrangian stochastic methodology. Model validation takes place against experimental data available for injection into an optically accessible constant volume chamber using a single-hole injector nozzle. A parametric analysis on the effect of ambient temperature and density, injection duration and multiple injection strategy is performed to enlighten the development of the injected sprays for various post-injection strategies, with densities in the range of 1.2 - 3 kg/m₃ and temperature in the range of 800 - 1400 K.
Recommended Content
Technical Paper | Impact of FAME Quality on Injector Nozzle Fouling in a Common Rail Diesel Engine |
Technical Paper | Interaction Mechanisms between Closely Spaced Sprays |
Journal Article | Large Eddy Simulation of GDI Single-Hole Flow and Near-Field Spray |
Authors
Topic
Citation
Tonini, S., Gavaises, M., and Cossali, G., "Modelling of Transport Phenomena in Diesel Sprays at Late-Cycle Post-Injection Conditions," SAE Technical Paper 2011-24-0010, 2011, https://doi.org/10.4271/2011-24-0010.Data Sets - Support Documents
Title | Description | Download |
---|---|---|
Unnamed Dataset 1 | ||
Unnamed Dataset 2 | ||
Unnamed Dataset 3 | ||
Unnamed Dataset 4 |
Also In
References
- Bobba, M. Musculus, M. Neel, W. “Effect of Post Injections on In-Cylinder and Exhaust Soot for Low-Temperature Combustion in a Heavy-Duty Diesel Engine,” SAE Int. J. Engines 3 1 496 516 2010 10.4271/2010-01-0612
- Desantes, J. Arrègle, J. López, J. García, A. “A Comprehensive Study of Diesel Combustion and Emissions with Post-injection,” SAE Technical Paper 2007-01-0915 2007 10.4271/2007-01-0915
- Chen, S.K. Simultaneous reduction of NOx and particulate emissions by using multiple injections in a small diesel engine SAE transactions 109 3 2127 2136 2000
- Hardy, W. Reitz, R. “An Experimental Investigation of Partially Premixed Combustion Strategies Using Multiple Injections in a Heavy-Duty Diesel Engine,” SAE Technical Paper 2006-01-0917 2006 10.4271/2006-01-0917
- Payri, F. Benajes, J. Pastor, J. Molina, S. “Influence of the Post-Injection Pattern on Performance, Soot and NOx Emissions in a HD Diesel Engine,” SAE Technical Paper 2002-01-0502 2002 10.4271/2002-01-0502
- Genzale, C. Pickett, L. Kook, S. “Liquid Penetration of Diesel and Biodiesel Sprays at Late-Cycle Post-Injection Conditions,” SAE Int. J. Engines 3 1 479 495 2010 10.4271/2010-01-0610
- Yamamoto, K. Takada, K. Kusaka, J. Kanno, Y. et al. “Influence of Diesel Post Injection Timing on HC Emissions and Catalytic Oxidation Performance,” SAE Technical Paper 2006-01-3442 2006 10.4271/2006-01-3442
- Siebers, D. “Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization,” SAE Technical Paper 1999-01-0528 SAE Journal 108 1999 10.4271/1999-01-0528
- Arcoumanis, C. Gavaises, M. French, B. “Effect of Fuel Injection Processes on the Structure of Diesel Sprays,” SAE Technical Paper 970799 1997 10.4271/970799
- Giannadakis, E. Gavaises, M. Arcoumanis, C. Modelling Cavitation in Diesel Injector Nozzle Holes J. Fluid Mechanics 616 153 193 2008
- Theodorakakos, A. Bergeles, G. Simulation of sharp gas-liquid interface using VOF method and adaptive grid local refinement around the interface Int. J. for Numerical Methods in Fluids 45 421 439 2004
- Tonini, S. Gavaises, M. Theodorakakos, A. The role of droplet fragmentation in high pressure evaporating Diesel sprays Int. J. of Thermal Sciences 48 554 572 2009
- Huh, K.Y. Gosman, A.D. A phenomenological model of diesel spray atomisation Proc. Int. Conf. Multiphase Flows 1991 Tsukuba, Japan
- Faeth, G.M. Hsiang, L.-P. Drop deformation and breakup sue to shock wave and steady disturbances Int. J. of Multiphase Flow 21 4 545 560 1995
- Su, T.F. Farrell, P.V. Characterization of high-injection pressure diesel spray with relation to particulate and NOx emissions Atomisation and Sprays 8 83 107 1998
- O'Rourke, P. Amsden, A. “The Tab Method for Numerical Calculation of Spray Droplet Breakup,” SAE Technical Paper 872089 1987 10.4271/872089
- Chryssakis, C.A. Assanis, D.N. A Secondary atomization model for liquid droplet deformation and breakup under high Weber number conditions ILASS Americas, 18 th Annual Conf. on Liquid Atomization and Spray Systems Irvine, CA May 2005
- Faeth, G.M. Hsiang, L.-P. Wu, P.-K. Structure and breakup properties of sprays Int. J. of Multiphase Flow 21 99 127 1995
- Hsiang, L.-P. Faeth, G.M. Near limit drop deformation and secondary breakup Int. J. of Multiphase Flow 18 635 652 1992
- Hsiang, L.-P. Faeth, G.M. Drop properties after secondary breakup Int. J. of Multiphase Flow 19 5 721 735 1993
- Nigmatulin, R.I. Dynamics of Multiphase Media 1 1991 Hemisphere Publishing Corp. Washington D.C.
- Pilch, M. Erdman, C.A. Use of breakup time data and velocity history data to predict the maximum size of stable fragments for acceleration-induced breakup of a liquid drop Int. J. of Multiphase Flow 13 741 757 1987
- Reitz, R. Diwakar, R. “Structure of High-Pressure Fuel Sprays,” SAE Technical Paper 870598 1987 10.4271/870598
- Sazhin, S.S. Advanced models of fuel droplet heating and evaporation Prog. in Energy and Combustion Science 32 162 214 2006
- Trujillo, M.F. Torres, D.J. O'Rourke, P.J. High-pressure multicomponent liquid sprays: departure from ideal behaviour Int. J. of Engine Research 5 3 229 246 2004
- Tonini, S. Gavaises, M. Arcoumanis, C. Theodorakakos, A. “Prediction of Liquid and Vapor Penetration of High Pressure Diesel Sprays,” SAE Technical Paper 2006-01-0242 2006 10.4271/2006-01-0242
- Feng, Z.G. Michaelides, E.E. Drag coefficients of viscous spheres at intermediate and high Reynolds numbers J. of Fluids Engineering-Transactions of the ASME 123 4 841 849 2001
- Graham, D.I. An improved eddy interaction model for prediction of turbulent particle J. of Fluids Engineering (Trans. ASME) 118 819 823 1996
- O'Rourke, P.J. Statistical Properties and Numerical Implementation of a Model for Droplet Dispersion in Turbulent Gas J. of Computational Physics 83 345 360 1989
- O'Rourke, P.J. Collective Drop Effects on Vaporizing Liquid Sprays PhD Thesis 1981 Princeton University
- Gavaises, M. Theodorakakos, A. Bergeles, G. Brenn, G. Evaluation of the effect of droplet collisions on spray mixing Proc. IMechE 210 465 475 1996
- Tonini, S. Gavaises, M. Theodorakakos, A. Modelling of High Pressure Dense Diesel Sprays with Adaptive Local Grid Refinement Int. J. of Heat and Fluid Flow 29 427 448 2008