This content is not included in your SAE MOBILUS subscription, or you are not logged in.
An Overview of Scientific and Technical Literature on Coanda Effect Applied to Nozzles
Technical Paper
2011-01-2591
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In 1911 the first fundamental patent of Henry Coanda has been submitted. And 2011 is the centenary of this event for aeronautic history. This paper presents a general review of applied research about Coanda effect nozzles, starting from earlier Coanda works to today's applications. Coanda effect based nozzles are considered, looking at the nozzles which can produce an effective angular deflection of a jet and in particular of a synthetic jet produced by two or more jets.
Recommended Content
| Technical Paper | Mathematical Modeling of Coanda Effect |
| Technical Paper | Interaction of Nonlinear Dynamics and Unsteady Flow in Fuel Injectors |
| Technical Paper | THE CHRYSLER REGENERATIVE TURBINE-POWERED PASSENGER CAR |
Citation
Trancossi, M., "An Overview of Scientific and Technical Literature on Coanda Effect Applied to Nozzles," SAE Technical Paper 2011-01-2591, 2011, https://doi.org/10.4271/2011-01-2591.Also In
References
- Coanda, H., US Patent n. 1,104,963 “Improvement in Propellers”, 1911, USA;
- Coanda, H., US Patent n. 3,261,162 “Lifting Device Coanda Effect”, 1936, USA;
- Bradshaw, P., “Effects of Streamline Curvature on Turbulent Flow,” AGARDograph, 1990, AGARDograph AG-169.
- Newman, B. G., “The Deflexion of Plane Jets by Adjacent Boundaries- Coanda Effect,” Boundary Layer and Flow Control, edited by Lachmann, G. V., Vol. 1, Pergamon Press, Oxford, 1961, pp. 232-264.
- Carpenter, P. W., and Green, P. N., “The Aeroacoustics and Aerodynamics of High- Speed Coanda Devices, Part 1: Conventional Arrangement of Exit Nozzle and Surface,” Journal of Sound and Vibration, Vol. 208, No. 5, 1997, pp. 777-801.
- Patankar, U. M., and Sridhar, K., “Three-Dimensional Curved Wall Jets,” Journal of Basic Engineering (changed to Journal of Engineering Materials and Technology; and the Journal of Fluids Engineering), Vol. 94, No. 2, 1972, pp. 339-344.
- Rask, R. B., An Experimental Study of Two-Dimensional and Three-Dimensional Curved Wall Jets, Ph.D. Thesis, University of Minnesota, 1973.
- Fekete, G. I., “Coanda Flow of a Two-Dimensional Wall Jet on the Outside of a Circular Cylinder,” Tech. Rept. 63-11, Mechanical Engineering Research Laboratories, McGill University, 1963.
- Wille, R., and Fernholz, H., “Report on the First European Mechanics Colloquium”, Journal of Fluid Mechanics, Vol. 23, 1965, pp. 801-819.
- Giles, J. A., Hays, A. P., and Sawyer, R. A., “Turbulent Wall Jets on Logarithmic Spiral Surfaces,” The Aeronautical Quarterly, 1966, pp. 201-215.
- Guitton, D. E., and Newman, B. G., “Self-Preserving Turbulent Wall Jets over Convex Surfaces,” Journal of Fluid Mechanics, Vol. 81, No. 1, 1977, pp. 155-185.
- Newman, B. G., “The Prediction of Turbulent Jets and Wall Jets,” Canadian Aeronautics and Space Journal, Vol. 15, 1969, pp. 287-305.
- Neuendorf, R., and Wygnanski, I., “On a Turbulent Wall Jet Flowing over a Circular Cylinder,” Journal of Fluid Mechanics, Vol. 381, 1999, pp. 1-25.
- Bevilaqua, P. M., and Lee, J. D., “Design of Supersonic Coanda Jet Nozzles,” Proceedings of the Circulation-Control Workshop 1986, 1986.
- Gregory-Smith, D. G., and Gilchrist, A. R., “The Compressible Coanda Wall Jet - an Experimental Study of Jet Structure and Breakaway,” International Journal of Heat and Fluid Flow, Vol. 8, No. 2, 1987, pp. 156-164.
- Gilchrist, A. R., and Gregory-Smith, D. G., “Compressible Coanda Wall Jet - Pre- dictions of Jet Structure and Comparison with Experiment,” International Journal of Heat and Fluid Flow, Vol. 9, No. 3, 1988, pp. 286-295.
- Gregory-Smith, D. G., and Hawkins, M. J., “The Development of an Axisymmetric Curved Turbulent Wall Jet,” International Journal of Heat and Fluid Flow, Vol. 12, No. 4, 1991, pp. 323-330.
- Gregory-Smith, D. G., and Senior, P., “The Effects of Base Steps and Axisymmetry on Supersonic Jets over Coanda Surfaces,” International Journal of Heat and Fluid Flow, Vol. 15, No. 4, 1994, pp. 291-298.
- Cornelius, K. C., and Lucius, G. A., “Physics of Coanda Detachment at High-Pressure Ratio,” Journal of Aircraft, Vol. 31, No. 3, 1994, pp. 591-596.
- Carpenter, P. W., and Green, P. N., “The Aeroacoustics and Aerodynamics of High- Speed Coanda Devices, Part 1: Conventional Arrangement of Exit Nozzle and Surface,” Journal of Sound and Vibration, Vol. 208, No. 5, 1997, pp. 777-801.
- Carpenter, P. W., and Smith, C., “The Aeroacoustics and Aerodynamics of High- Speed Coanda Devices, part 2: Effects of Modifications for Flow Control and Noise Reduction,” Journal of Sound and Vibration, Vol. 208, No. 5, 1997, pp. 803-822.
- Juvet, P. J. D., Control of High Reynolds Number Round Jets, Ph.D. Thesis, Department of Mechanical Engineering, Stanford University, 1993.
- Wing, D. J., “Static Investigation of Two Fluidic Thrust-Vectoring Concepts on a Two- Dimensional Convergent-Divergent Nozzle,” Tech. Rept. NASA TM-4574, Hampton, VA, 1994.
- Mason, M. S., and Crowther, W. J., “Fluidic Thrust Vectoring of Low Observable Aircraft,” CEAS Aerospace Aerodynamic Research Conference, June 2002.
- Parks, E. K., and Petersen, R. E., “Analysis of a Coanda Type Flow,” AIAA Journal, Vol. 6, No. 1, 1968, pp. 4-7.
- Moser, R. D., “The Effects of Curvature in Wall-Bounded Turbulent Flows,” Journal of Fluid Mechanics, Vol. 175, 1987, pp. 479-510.
- Wernz, S., and Fasel, H. F., “Numerical Investigation of Transition Mechanisms Influencing the Development of Turbulent Wall Jets,” Collection of Technical Papers - 36th AIAA Fluid Dynamics Conference, Vol. 4, 2006, pp. 2442-2457.
- Lin, Y. F., and Sheu, M. J., “Investigation of Two Plane Parallel Unventilated Jets,” Experiments in Fluids, Vol. 10, 1990, pp. 17-22.
- Bunderson, N., and Smith, B. L., “Passive Mixing Control of Plane Parallel Jets, Experiments in Fluids, Vol. 39, 2005, pp. 66-74.
- Anderson, E. A., Snyder, D. O., and Christensen, J., “Periodic Flow Between Low Aspect Ratio Parallel Jets,” ASME Journal of Fluids Engineering, Vol. 125, 2003, pp. 389-392.
- Fujisawa, N., Nakamura, K., and Srinivas, K., “Interaction of Two Parallel Plane Jets of Different Velocities,” Journal of Visualization, Vol. 7, No. 2, 2004, pp. 135-142.
- Bunderson, N., and Smith, B. L., “Passive Mixing Control of Plane Parallel Jets,” Experiments in Fluids, Vol. 39, 2005, pp. 66-74.
- Smith, B. L., High-speed jet control, United States Patent Application 20070158468
- Smith, B. L., High-speed jet control, United States Patent 7757966, 2010
- Allen, D. S. and Smith, B. L., “Axisymmetric Coanda-assisted vectoring,” submitted to Exp. Fluids, December, 2007.
- Humes, Z. E. and Smith, B. L., Particle Size Classification of Glass Particles Using Aerodynamic Jet Vectoring, Particle & Particle Systems Characterization, Vol. 25 pp. 168-175, 2008.
- Allen, D. S., Axisymmetric Coanda-Assisted Vectoring (2008). All Graduate Theses and Dissertations. Paper 90. http://digitalcommons.usu.edu/etd/90;
- Krueger, P.S., Generation of a pulsed jet by jet vectoring through a nozzle with multiple outlets, US Patent Application Pub. No.: US 2010/0237165 Al, 2010;
- Dumas, A., Trancossi, M., Giuliani, I. and Madonia, M. “Ugello capace di deviare in modo dinamico e controllabile un getto sintetico senza parti meccaniche in movimento e relativo sistema di controllo” IT. Patent N. RE2011A000049, 2011.
- Trancossi, M. and Dumas, A., “Coanda Synthetic Jet Deflection Apparatus and Control,” SAE Technical Paper 2011-01-2590, 2011.
- Trancossi, M. and Dumas, A., “A.C.H.E.O.N.: Aerial Coanda High Efficiency Orienting-jet Nozzle,” SAE Technical Paper 2011-01-2737, 2011.