This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Study of Vehicle Structural Characteristics for Creep Groan Noise
Technical Paper
2011-01-2363
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Creep-groan noise is a low frequency noise less than 1000Hz and occurs when the vehicle is moving from stop or slowly stopping while the brake is applied at low brake pressure. The vibration source causing the sound is commonly thought to result from friction force variation in stick-slip phenomenon between friction material and disc. In the past, studies have been mainly focused on stick-slip. However, systematic approach involving chassis components has been recently investigated. In this paper, using a chassis dynamometer creep groan noise was reproduced. Through vibration measurements and modal impact tests, the effects of the vehicle system on creep noise were analyzed.
Recommended Content
Authors
Citation
Yoon, K., Lee, J., and Cho, S., "The Study of Vehicle Structural Characteristics for Creep Groan Noise," SAE Technical Paper 2011-01-2363, 2011, https://doi.org/10.4271/2011-01-2363.Also In
References
- Abdelhamid, M. Bray, W. “Braking Systems Creep Groan Noise: Detection and Evaluation,” SAE Technical Paper 2009-01-2103 2009 10.4271/2009-01-2103
- Donley, M. Riesland, D. “Brake Groan Simulation for a McPherson Strut Type Suspension,” SAE Technical Paper 2003-01-1627 2003 10.4271/2003-01-1627
- Vadari, V. Jackson, M. “An Experimental Investigation of Disk Brake Creep-Groan in Vehicles and Brake Dynamometer Correlation,” SAE Technical Paper 1999-01-3408 1999 10.4271/1999-01-3408
- Han, MinGyu “Study on Brake Creep-Groan Noise with Chassis Dynamometer” IPC-13 - 317 322
- Abdelhamid, M. “Creep Groan of Disc Brakes,” SAE Technical Paper 951282 1995 10.4271/951282
- Brecht, J. Hoffrichter, W. Dohle, A. “Mechanisms of Brake Creep Groan,” SAE Technical Paper 973026 1997 10.4271/973026
- Kim, C. Lee, B. Lee, C. Jeong, H. “Analysis of the Induced Brake Moan Noise in the Coupled Torsional Beam Axle Suspension Module,” SAE Technical Paper 2005-01-3920 2005 10.4271/2005-01-3920