This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
DPF Regeneration Response: Coupling Various DPFs with a Thermal Regeneration Unit to Assess System Behaviors
Technical Paper
2011-01-2200
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diesel Particulate Filters (DPFs) have been successfully applied for several years to reduce Particulate Matter (PM) emissions from on-highway applications, and similar products are now also applied in off-highway markets and retrofit solutions. Most solutions are catalytically-based, necessitating minimum operating temperatures and demanding engine support strategies to reduce risks [1, 2, 3, 4, 5, 6, 7, 8]. An ignition-based thermal combustion device is applied with Cordierite and SiC filters, evaluating various DPF conditions, including effects of soot load, exhaust flow rates, catalytic coatings, and regeneration temperatures. System designs are described, including flow and temperature uniformity, as well as soot load distribution and thermal gradient response. The thermal regeneration unit offers closed-loop temperature control across practically all operating conditions, including idle and low-temperature duty cycles, minimizing risks of soot-overload and enabling cost-effective robust solutions.
Recommended Content
Technical Paper | Performance Characterization of a Thermal Regeneration Unit for Exhaust Emissions Controls Systems |
Technical Paper | Electric Heating Regeneration of Large Wall-Flow Type DPF |
Technical Paper | Soot Morphology Effects on DPF Performance |
Authors
Citation
Kotrba, A., Bai, L., Yetkin, A., Shotwell, R. et al., "DPF Regeneration Response: Coupling Various DPFs with a Thermal Regeneration Unit to Assess System Behaviors," SAE Technical Paper 2011-01-2200, 2011, https://doi.org/10.4271/2011-01-2200.Also In
References
- Sarento, G. N. White, A. D. Kotrba, A. J. Yetkin, A. “Engine Tests of an Active Diesel Particulate Filter Regeneration System,” SAE Technical Paper 2006-01-1089 2006 10.4271/2006-01-1089
- Boger, T. Rose, D. Tilgner, I-C. Heibel, A. K. “Regeneration Strategies for an Enhanced Thermal Management of Oxide Diesel Particulate Filters,” SAE Technical Paper 2008-01-0328 2008 10.4271/2008-01-0328
- Flörchinger, P. Zink, U. Cutler, W. Tomazic, D. “DPF Regeneration-Concept to Avoid Uncontrolled Regeneration During Idle,” SAE Technical Paper 2004-01-2657 2004 10.4271/2004-01-2657
- Zhan, R. Huang, Y. Khair, M. “Methodologies to Control DPF Uncontrolled Regenerations,” SAE Technical Paper 2006-01-1090 2006 10.4271/2006-01-1090
- Johnson, Tim “Diesel Emission Control Review” 2010 DEER Conference
- Kong, Y. Kozakiewicz, T. Johnson, R. Huffmeyer, C. et al. “Active DPF Regeneration for 2007 Diesel Engines,” SAE Technical Paper 2005-01-3509 2005 10.4271/2005-01-3509
- Joshi, A. Chatterjee, S. Sawant, A. Akerlund, C. et al. “Development of an Actively Regenerating DPF System for Retrofit Applications,” SAE Technical paper 2006-01-3553 2006 10.4271/2006-01-3553
- Schmidt, N. Root, T. Wirojsakunchai, E. Schroeder, E. et al. “Detailed Diesel Exhaust Particulate Characterization and DPF Regeneration Behavior Measurements for Two Different Regeneration Systems,” SAE Technical Paper 2007-01-1063 2007 10.4271/2007-01-1063
- Rose, D. Boger, T. “Different Approaches to Soot Estimation as Key Requirement for DPF Applications,” SAE Technical Paper 2009-01-1262 2009 10.4271/2009-01-1262
- Sappok, A. Wong, V. W. “Ash Effects on Diesel Particulate Filter Pressure Drop Sensitivity to Soot and Implications for Regeneration Frequency and DPF Control,” SAE Int. J. Fuels Lubr. 3 1 380 396 2010 10.4271/2010-01-0811
- Mizutani, T. Ito, M. Masukawa, N. Ichikawa, S. et al. “The Study for Structural Design of the Segmented SiC-DPF,” SAE Technical Paper 2006-01-1527 2006 10.4271/2006-01-1527
- Paterson, C. Van Dyne, E. Stanglmaier, R. “Development of a Diesel Particulate Filter Burner Control System for Active Trap Regeneration,” SAE Technical Paper 2007-01-1064 2007 10.4271/2007-01-1064