Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

FAME Blended Diesel Fuel Impacts on Engine/Vehicle Systems

Journal Article
2011-01-1944
ISSN: 1946-3952, e-ISSN: 1946-3960
DOI: https://doi.org/10.4271/2011-01-1944
Published August 30, 2011 by SAE International in United States
FAME Blended Diesel Fuel Impacts on Engine/Vehicle Systems
Sector:
Citation: Kono, N., Yamamori, K., Furukawa, T., and Noorman, M., "FAME Blended Diesel Fuel Impacts on Engine/Vehicle Systems," SAE Int. J. Fuels Lubr. 5(1):163-179, 2012, https://doi.org/10.4271/2011-01-1944.
Language: English

References

  1. ASTM D6751 “Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels” 2009
  2. EN14214 “Automotive fuels - Fatty acid methyl esters (FAME) for diesel engines - Requirements and test methods” 2009
  3. JIS K 2390 “Automotive fuels -- Fatty acid methyl ester (FAME) as blend stock” 2008
  4. ASTM D975 “Standard Specification for Diesel Fuel Oils” 2010
  5. EN 590 “Automotive fuels - Diesel - Requirements and test methods” 2010
  6. Tsuchiya, T. Shiotani, H. Goto, S. Sugiyama, G. Maeda, A. “Japanese Standards for Diesel Fuel Containing 5% FAME: Investigation of Acid Generation in FAME Blended Diesel Fuels and Its Impact on Corrosion” SAE Technical Paper 2006-01-3303 2006
  7. ASTM D7467 “Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)” 2009
  8. FIE 2000 “Fatty Acid Methyl Ester Fuels as a Replacement or Extender for Diesel Fuels Diesel Fuel Injection Equipment Manufacturers Common Position Statement” FAME Fuel - Joint FIE Manufacturers Statement June 2000
  9. Technical Report CRC Project No. AVFL-2a Impact of Biodiesel on Fuel System Component Durability September 2005
  10. Fraer, Richard Dinh, Han Proc, Kenneth McCormick, Robert L. Chandler, Kevin Buchholz, BuchholzBruce “Operating Experience and Teardown Analysis for Engines Operated on Biodiesel Blends (B20)” SAE Technical Paper 2005-01-3641
  11. Proc, Kenneth Barnitt, Robb Hayes, R. Robert Ratcliff, Matthew McCormick, Robert L. Ha, Lou Fang, Howard L. “100,000-Mile Evaluation of Transit Buses Operated on Biodiesel Blends (B20)” SAE Technical Paper 2006-01-3253
  12. Quigley, Robert Barbour, Robert H. “Biodiesel Quality Improvement with Additive Treatment” SAE Technical Paper 2004-01-1859
  13. Miyata, Itsuki Takei, Yasunori Tsurutani, Kazushi Okada, Masanori “Effects of Bio-Fuels on Vehicle Performance: Degradation Mechanism Analysis of Bio-Fuels” SAE Technical Paper 2004-01-3031
  14. Terry, Barbara McCormick, Robert L. Natarajan, Mani “Impact of Biodiesel Blends on Fuel System Component Durability” SAE Technical Paper 2006-01-3279
  15. Fang, Howard L. McCormick, Robert L. “Spectroscopic Study of Biodiesel Degradation Pathways” SAE Technical Paper 2006-01-3300
  16. Shiotani, Hitoshi Goto, Shinichi “Studies of Fuel Properties and Oxidation Stability of Biodiesel Fuel” SAE Technical Paper 2007-01-0073
  17. Sugiyama, Gen Maeda, Akira Nagai, Keiichi “Oxidation Degradation and Acid Generation in Diesel Fuel Containing 5% FAME” SAE Technical Paper 2007-01-2027
  18. Hawthorne, Mark Roos, Joseph W. Openshaw, Martin J. “Use of Fuel Additives to Maintain Modern Diesel Engine Performance with Severe Test Conditions” SAE Technical Paper 2008-01-1806
  19. Birgel, A. Ladommatos, N. Aleiferis, P. Zülch, S. Milovanovic, N. Lafon, V. Orlovic, A. Lacey, P. Richards, P. “Deposit Formation in the Holes of Diesel Injector Nozzles: A Critical Review” SAE Technical Paper 2008-01-2383
  20. Ogawa, T. Kajiya, S. Kosaka, S. Tajima, I. et al. “Analysis of Oxidative Deterioration of Biodiesel Fuel,” SAE Int. J. Fuels Lubr. 1 1 1571 1583 2009 10.4271/2008-01-2502
  21. Dodos, George S. Zannikos, Fanourios Stournas, Stamos “Effect of Metals in the Oxidation Stability and Lubricity of Biodiesel Fuel” SAE Technical Paper 2009-01-1829
  22. Barker, J. Richards, P. Goodwin, M. Wooler, J. “Influence of High Injection Pressure on Diesel Fuel Stability: A Study of Resultant Deposits,” SAE Int. J. Fuels Lubr. 2 1 877 884 2009 10.4271/2009-01-1877
  23. Cook, Steve Richards, Paul “Possible Influence of High Injection Pressure on Diesel Fuel Stability: A Review and Preliminary Study” SAE Technical Paper 2009-01-1878
  24. Barker, J. Richards, P. Snape, C. Meredith, W. “A Novel Technique for Investigating the Nature and Origins of Deposits Formed in High Pressure Fuel Injection Equipment,” SAE Int. J. Fuels Lubr. 2 2 38 44 2010 10.4271/2009-01-2637
  25. Uitz, Renate Brewer, Mark Williams, Rod “Impact of FAME Quality on Injector Nozzle Fouling in a Common Rail Diesel Engine” SAE Technical Paper 2009-01-2640
  26. Zhang, Xusheng Li, Liguang Wu, Zhijun Hu, Zongjie Zhou, Ying “Material Compatibilities of Biodiesels with Elastomers, Metals and Plastics in a Diesel Engine” SAE Technical Paper 2009-01-2799
  27. Barker, J. Richards, P. Snape, C. Meredith, W. Bartoli, Y. Lyford-Pike, E. Lucke, J. Khalek, I. et al. “1000-Hour Durability Evaluation of a Prototype 2007 Diesel Engine with Aftertreatment Using B20 Biodiesel Fuel,” SAE Int. J. Fuels Lubr. 2 2 290 304 2010 10.4271/2009-01-2803
  28. http://www.biodiesel.org/buyingbiodiesel/guide/B2 0_Fleet_Recommendations.pdf
  29. ASTM D525 “Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)” 2005
  30. JIS K 2501 “Petroleum products and lubricants -- Determination of neutralization number” 2003
  31. EN15751 “Automotive fuels - Fatty acid methyl esters (FAME) fuel and blends with diesel fuel - Determination of oxidation stability by accelerated oxidation method” 2009
  32. “A Review of Fuel and Additive Performance in the New CEC F-98-08 DW10 Injector Fouling Test” www.lubsbelgium.be/nl/LUBRIZOL.pps 2010 Sep.

Cited By

Recommended Content

Technical Paper Application of Nanotechnology in Automotive Fuel Systems in Restricting Permeation
Technical Paper Advances in Gasoline Direct Injection Fuel Pump Technologies
Ground Vehicle Standard Test Procedure to Measure Permeation of Elastomeric Hose or Tube by Weight Loss