This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Investigations on Deposit Formation in the Holes of Diesel Injector Nozzles
Journal Article
2011-01-1924
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Birgel, A., Ladommatos, N., Aleiferis, P., Milovanovic, N. et al., "Investigations on Deposit Formation in the Holes of Diesel Injector Nozzles," SAE Int. J. Fuels Lubr. 5(1):123-131, 2012, https://doi.org/10.4271/2011-01-1924.
Language:
English
References
- Lepperhoff, G. Houben, M. “Mechanisms of Deposit Formation in Internal Combustion Engines and Heat Exchangers” SAE Technical Paper 931032 1993
- Caprotti, R. Fowler, W. J. Lepperhoff, G. Houben, M. “Diesel Additive Technology Effects on Injector Hole Erosion/corrosion, Injector Fouling and Particulate Traps” SAE Technical Paper 932739 1993
- Richards, P. Walker, R.D. Williams, D. “Fouling of Two Stage Injectors - An Investigation into Some Causes and Effects” SAE Technical Paper 971619 1997
- Winterbone, D. E. Clough, E. Rao, K. K. Richards, P. Williams, D. “The Effect of DI Nozzle Fouling on Fuel Spray Characteristics” SAE Technical Paper 922232 1992
- Birgel, A. Ladommatos, N. Aleiferis, P. Zülch, S. Milovanovic, N. Lafon, V. Orlovic, A. Lacey, P. Richards, P. “Deposit Formation in the Holes of Diesel Injector Nozzles: A Critical Review” SAE Technical Paper 2008-01-2383 2008
- Argueyrolles, B. Dehoux, S. Gastaldi, P. Grosjean, L. Levy, F. Michel, A. Passerel, D. “Influence of injector nozzle design and cavitation on coking phenomenon” SAE 2007-01-1896 JSAE 20077184 2007
- Sem, T. R. “Investigation of Injector Tip Deposits on Transport Refrigeration Units Running on Biodiesel Fuel” SAE Technical Paper 2004-01-0091
- Loest, O. Ullmann, J. Winter, J. “Investigation on the Addition of FAME to Diesel Fuels” DGMK Deutsche Wissenschaftliche Gesellschaft für Erdöl, Erdgas, und Kohle e.V., Research Report 639e Hamburg, Germany 2007
- Barbour, R. Arters, D. Dietz, J. Macduff, M. Panesar, A. Quigley, R. “Diesel Detergent Additive Responses in Modern, High-Speed, Direct-Injection, Light-Duty Engines” SAE Technical Paper 2007-01-2001 2007
- Hawthorne, M. Roos, J. W. Openshaw, M. J. “Use of Fuel Additives to Maintain Modern Diesel Engine Performance with Severe Test Conditions” SAE Technical Paper 2008-01-1806 2008
- Uitz, R. Brewer, M. Williams, R. “Impact of FAME Quality on Injector Nozzle Fouling in a Common Rail Diesel Engine” SAE Technical Paper 2009-01-2640 2009
- Leedham, A. Caprotti, R Graupner, O. Klaua, T. “Impact of Fuel Additives on Diesel Injector Deposits” SAE Technical Paper 2004-01-2935 2004
- Caprotti, R. Breakspear, A. Graupner, O. Klaua, T. “Detergency Requirements of Future Diesel Injection System” SAE Technical Paper 2005-01-3901 2005
- Caprotti, R. Breakspear, A. Graupner, O. Klaua, T. Kohnen, O. “Diesel Injector Deposits Potential on Future Fueling Systems” SAE Technical Paper 2006-01-3359 2006
- Direct Injection, Common Rail Diesel Engine Nozzle Coking Test 4 27 January 2010
- Watkinson, A. P. Wilson, D. I. “Chemical Reaction Fouling: A Review” Experimental Thermal and Fluid Science 14 361 374 Elsevier Science Inc. New York 1997
- Gallant, T. R. Carman, M. C. Gray, J. T. Strete, N. M. “Cummins L10 Injector Depositing Test to Evaluate Diesel Fuel Quality” SAE Technical Paper 912331
- Blythe, G. H. Flask, C. A. “Development of an Image Analysis System to Rate Injectors from the Cummins L10 Injector Depositing Test” SAE Technical Paper 972902 1997
- Mendoza, M. C. Zhang, Q. Hansen, A. C. Reid, J. F. “Injector Nozzle Coking With Oxygenated Diesel” SAE Technical Paper 2001-01-2016 2001
- Korus, R. A. Jo, J. Peterson, C. L “A Rapid Engine Test to Measure Injector Fouling in Diesel Engines Using Vegetable Oil Fuels” Journal of the American Oil Chemists' Society 62 11 1563 1564 1985
Cited By
Recommended Content
Technical Paper | Protecting Diesel Fuel Injection Systems |
Technical Paper | Diesel Injector Deposits - An Issue That Has Evolved with Engine Technology |
Technical Paper | The Effects of Fuel Detergents on Nozzle Fouling and Emissions in IDI Diesel Engines |