This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Diesel-PPC engine: Predictive Full Cycle Modeling with Reduced and Detailed Chemistry
Technical Paper
2011-01-1781
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Partially Premixed Combustion (PPC) engines have demonstrated a potential for high efficiency and low emissions operation. To be able to study the combustion in detail but also to perform parametric studies on the potential of the PPC concept a one dimensional (1D) engine simulation tool was used with 1; a prescribed burn rate 2; predictive combustion tool with reduced chemical model and 3; predictive combustion tool with detailed chemical models. Results indicate that fast executing reduced chemistry work reasonably well in predicting PPC performance and that n-decane is possibly a suitable diesel substitute in PPC modeling while n-heptane is not.
Authors
Topic
Citation
Tuner, M., Frojd, K., Seidel, L., and Mauss, F., "Diesel-PPC engine: Predictive Full Cycle Modeling with Reduced and Detailed Chemistry," SAE Technical Paper 2011-01-1781, 2011, https://doi.org/10.4271/2011-01-1781.Also In
References
- IEA World Energy Outlook 2004 www.iea.org
- Stanton, D. High Efficiency Clean Combustion for SuperTruck DEER 2010
- Manente, V. Johansson, B. Tunestal, P. Zander, C.-G. Cannella, W. “An Advanced Internal Combustion Engine Concept for Low Emissions and High Efficiency from Idle to Max Load Using Gasoline Partially-Premixed Combustion” SAE Paper 2010-01-2198 2010
- Olsson, J. et al. “A Turbo Charged Dual Fuel HCCI Engine” SAE 2001-01-1896
- Kokjohn, S. Hanson, R. Splitter, D. Reitz, R. “Experiments and Modeling of Dual-Fuel HCCI and PCCI Combustion Using In-Cylinder Fuel Blending,” SAE Int. J. Engines 2 2 24 39 2010 10.4271/2009-01-2647
- Chen, J.H. Choudhary, A. Supinski, B. DeVries, J. Hawkes, E.R. Klasky, S. Liao, W.K. Ma, K.L. Mellor-Crummey, J. Podhorszki, N. Sankaran, R. Shende, S. Yoo, C.S. Terascale direct numerical simulations of turbulent combustion using S3D Comput. Sci. Disc. 2 1 31 2009
- Lehtiniemi, H. Zhang, Y. Rawat, R. Mauss, F. “Efficient 3-D CFD Combustion Modeling with Transient Flamelet Models” SAE 2008-01-0957
- Fridriksson, H. Hajireza, S. Sundén, B. Tunér, M. “CFD Investigation of Heat Transfer in a Diesel Engine with Diesel and PPC Combustion Modes” JSAE 20119177 SAE 2011-01-1838
- Joelsson, T. Yu, R. Bai, X. Vressner, A. et al. “Large Eddy Simulation and Experiments of the Auto-Ignition Process of Lean Ethanol/Air Mixture in HCCI Engines,” SAE Int. J. Fuels Lubr. 1 1 1110 1119 2009 10.4271/2008-01-1668
- Vermorel, O. Richard, S. Colin, O. Angelberger, C. Benkenida, A. Veynante, D. 2009 “Towards the understanding of cyclic variability in a spark ignited engine using multi-cycle LES,” Combustion and Flame 156 1525 1541
- Westin, F. Ångström, H-E. Simulation of a Turbocharged SI-Engine with Two Software and Comparison with Measured Data SAE Paper 2003-01-3124 2003
- Kolade, B. Morel, T. Kong, S-C. Coupled 1-D/3-D Analysis of Fuel Injection and Diesel Engine Combustion SAE 2004-01-0928 2004
- Montorsi, L. Mauss, F. Bianchi, G. M. Bhave, A. Kraft, M. 2003 Analysis of the HCCI Combustion of a Turbocharged Truck Engine Using a Stochastic Reactor Model ASME ICE Division, ICES-2003-681
- Tunér, M. Pasternak, M. Mauss, F. Bensler, H. A PDF-Based Model for Full Cycle Simulation of Direct Injected Engines SAE 2008-01-1606
- www.gtisoft.com
- www.diginars.com
- Kraft, M. Stochastic Modelling of Turbulent Reacting Flow in Chemical Engineering 1998 1 109
- Bhave, A. Balthasar, M. Kraft, M. Mauss, F. Analysis of a natural gas fuelled homogeneous charge compression ignition engine with exhaust gas recirculation using a stochastic reactor model Int. J. Engine Res. 5 1 93 103 2004
- Tunér, M. Ph.D. Thesis Stochastic Reactor Models for Engine Simulations Division of Combustion Physics, Lund University 2008 1102-8718
- Woschni, G. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine SAE 670931
- Curl, R. L. Dispersed Phase Mixing: I. Theory and Effects in Simple Reactors A.I. Ch.E. Journal 9 2 175 181 1963
- Samuelsson, K. Gogan, A. Netzell, K. Lehtiniemi, H. Sunden, B. Mauss, F. “Modeling Diesel Engine Combustion and Pollutant Formation Using a Stochastic Reactor Model Approach” Intl. Conf. Clean Diesel Combustion Lund 2005
- Tsurushima, T. A new skeletal PRF kinetic model for HCCI combustion Proceedings of the Combustion Institute 2009
- Seidel, L. Leon, L. Mauss, F. Zeuch, T. Moreac, G. “A comprehensive mechanism for fuel mixtures including oxygenated species” European Combustion Meeting 2011 Cardiff
- Ahmed, S.S. A Detailed Modeling Study for Primary Reference Fuels and Fuel Mixtures and Their Use in Engineering Application PhD Thesis Combustion Physics, Lund University 2006
- Hilbig, M. Seidel, L. Wang, X. Mauss, F. Zeuch, T. Computer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-Decane Approved for publication at 23rd ICDERS 24 27 July 2011
- Mauss, F. 1998 Entwicklung eines kinetischen Modells der Rußbildung mit schneller Polymerisation, D 82 RWTH Aachen 3-89712-152-2
- Schuetz, C.A. Frenklach, M. 2002 Nucleation of soot: molecular dynamics simulations of pyrene dimerization Proc. Combust. Instit. 29 2307 2314
- Mitchell, P. Frenklach, M. 2003 Particle aggregation with simultaneous surface growth Phys. Rev. E 67 6
- Frenklach, M. Wang, H. 1990 Detailed modeling of soot particle nucleation and growth Proc. Combust. Instit. 23 1559 1566
- Kazakov, A. Frenklach, M. 1998 Dynamic modeling of soot particle coagulation and aggregation: implementation with the method of moments and application to high-pressure laminar premixed flames Combust. Flame 114 484 501
- Frenklach, M. 2002 Method of moments with interpolative closure Chem. Eng. Sci. 57 2229 2239
- Dukowicz, J.K. Quasi-Steady Droplet Phase Change in the Presence of Convection Los Alamos Scientific Laboratory, LA-7997-MS Los Alamos, New Mexico 1979
- Tunér, M. Karlsson, M. Mauss, F. Studying HCCI Combustion and its Cyclic Variations versus Heat Transfer, Mixing and Discretization using a PDF based approach SAE 2009-01-0667
- Zeuch, Thomas Moréac, Gladys Ahmed, Syed Sayeed Mauss, Fabian A comprehensive skeletal mechanism for the oxidation of n-heptane generated by chemistryguided reduction Combustion and Flame 155 4 651674 2008
- Curran, H. J. Gaffuri, P. Pitz, W. J. Westbrook, C. K. “A Comprehensive Modeling Study of iso-Octane Oxidation,” Combustion and Flame 129 253 280 2002
- Tsurushima, T. Shimazaki, N. Asaumi, Y. Gas sampling analysis of combustion processes in a homogeneous charge compression ignition engine International Journal of Engine Research 1 4 2000
- Danielsson, D. Erlandsson, L. Comparing Exhaust Emissions from Heavy Duty Diesel Engines using EN 590 vs. MK1 Diesel Fuel AVL MTC 0015 2010
- VDI Heat Atlas 2 nd Springer 2010