This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Model-based Toolchain for the Efficient Development of Safety-Relevant Automotive Embedded Systems
Technical Paper
2011-01-0056
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Advanced functionalities unthinkable a few decades ago are now being introduced into automotive vehicles through embedded systems for reasons like emission control, vehicle connectivity, safety and cooperative behaviors. As the development often involves stakeholders from different engineering disciplines and organizations, the complexity due to shared requirements, interdependencies of data, functions, and resources, as well as tight constraints in regards to timing, safety, and resource efficiency makes the system integration, quality control and assurance, reuse and change management increasingly more difficult. This calls for a more rigorous approach to the development of automotive embedded systems and components. This paper describes the CESAR reference technology platform (RTP) that supports the formalization of various engineering concerns in the development of safety-relevant embedded systems and thereby a model-based integration of various tools and methods to form seamless environments or toolchains for the development of such systems.
Recommended Content
Technical Paper | High Efficiency Diesel Powered Centrifugal Compressor and Electrical Generator for Aircraft Ground Support |
Technical Paper | Compressing Aviation Data in XML Format |
Aerospace Standard | Rotary Plow with Carrier Vehicle |
Authors
- Eric Armengaud - Virtual Vehicle
- Markus Zoier - Virtual Vehicle
- Andreas Baumgart - OFFIS e. V.
- Matthias Biehl - Royal Institute of Technology
- DeJiu Chen - Royal Institute of Technology
- Gerhard Griessnig - AVL List
- Christian Hein - Fraunhofer FOKUS
- Tom Ritter - Fraunhofer FOKUS
- Ramin Tavakoli Kolagari - Volvo Technology Corporation
Citation
Armengaud, E., Zoier, M., Baumgart, A., Biehl, M. et al., "Model-based Toolchain for the Efficient Development of Safety-Relevant Automotive Embedded Systems," SAE Technical Paper 2011-01-0056, 2011, https://doi.org/10.4271/2011-01-0056.Also In
References
- AADL Architecture Analysis & Design Language http://www.aadl.info
- Altheide, F. Dörfel, S. Dörr, H. Kanzleiter, J. An architecture for a sustainable tool integration Proc. of the Workshop on Tool Integration in System Development, European Software Engineering Conference (TIS 2003) 2003 29 32
- The ATESST2 Consortium EAST-ADL Domain Model Specification Advancing Traffic Efficiency and Safety through Software Technology (ATESST). EUROPEAN COMMISSION FP7 Grant Agreement 224442 2010 www.atesst.org
- AUTOSAR Development Partnership http://www.autosar.org
- Baumgart, A. A common meta-model for the interoperation of tools with heterogeneous data models Proceedings of the 3 rd Workshop on Model-Driven Tool & Process Integration (MDTPI, 2010)
- Baumgart, A. Reinkemeier, P. Rettberg, A. Stierand, I. Thaden, E. Weber, R. A Model-Based Design Methodology with Contracts to Enhance the Development Process of Safety-Critical Systems Proceedings of 8th IFIP Workshop on Software Technologies for Future Embedded and Ubiquitous Systems (SEUS, 2010)
- Burmester, S. Giese, H. Niere, J. Tichy, M. Wadsack, J. Wagner, R. Wendehals, L. Zündorf, A. Tool integration at the meta-model level: the fujaba approach International Journal on Software Tools for Technology Transfer (STTT) 6 2004 203 218
- Burmester, S. Giese, H. Hirsch, M. Schilling, D. Tichy, M. The fujaba real-time tool suite Proc. of the 27th International Conference on Software Engineering (ICSE 2005) 2005 670 671
- Earl, A. Principles of a reference model for computer aided software engineering environ-ments Ling, F The international Workshop on Environments (Software Engineering Environments) 647 115 129 Springer-Verlag Berlin September 1989 Chinon, France
- Griessnig, G. Mader, R. Peikenkamp, T. Josko, B. Törngren, M. Armengaud, E. CESAR: Cost-Efficient Methods and Processes for Safety Relevant Embedded Systems Embedded World 2010 - ARTEMIS Session
- Hein, C. Ritter, T. Wagner, M. Model-driven tool integration with modelbus Proc. of the Workshop Future Trends of Model-Driven Development 2009
- International Organization for Standardization ISO/DIS 26262 on Functional Safety for Road Vehicles 2009
- OMG The UML Profile for MARTE - Modeling and Analysis of Real-Time and Embedded Systems MARTE specification version 1.0 http://www.omgmarte.org/
- OMG OMG Systems Modeling Language - SysML, V1.2 http://www.sysml.org
- Papyrus UML Open Source Tool for Graphical UML2 Modelling http://www.papyrusuml.org
- Passerone, R. Ben Hafaiedh, I. Graf, S. Benveniste, A. Cancila, D. Cuccuru, A. Girard, S. Terrier, F. Damm, W. Ferrari, A. Mangeruca, L. Josko, B. Peikenkamp, T. Sangiovanni-Vincentelli, A. Metamodels in Europe: Languages, tools, and applications IEEE Design and Test of Computers 26 3 2009 38 53
- Peikenkamp, T. Cavallo, A. Valacca, L. Böde, E. Pretzer, M. Hahn, E.M. Towards a Unified Model-Based Safety Assessment SAFECOMP 2006 275 288
- Ridderhof, W. Gross, H.G. Dörr, H. Establishing evidence for safety cases in automotive systems - a case study Proc. of the 26th International Conference on Computer Safety, Reliability, and Security (SAFECOMP 2007) 2007 1 13
- Sandberg, A. Chen, D. Lönn, H. Johansson, R. Feng, L. Törngren, M. Torchiaro, S. Tavakoli-Kolagari, R. Abele, A. Model-based Safety Engineering of Interdependent Functions in Automotive Vehicles Using EAST-ADL2 Lecture Notes in Computer Science 2011 6351 Computer Safety, Reliability, and Security Springer 2011 332 346
- SPEEDS Consortium SPEEDS (SPECulative and Exploratory Design in System Engineering), European funded project 2008 http://www.speeds.eu.com/
- SPEEDS Project D.2.1.5 SPEEDS L-1 Meta-Model: Deliverable May 2009
- Thomas, I. Nejmeh, B. Definitions of Tool Integration for Environments IEEE Software 9 2 29 35 March 1992
- TIMMO TIMing MOdel http://www.timmo.org/
- Wassermann, A. Tool Integration in software engineering environments The International Workshop on Environments (Software Engineering Environments) 647 137 149 Springer-Verlag Berlin September 1989 Chinon, France