This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Vehicle Application of Auxiliary Cold Start System with the Fuel Distributor and the Extra Electronic Fuel Injector
Technical Paper
2010-36-0190
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Along the last thirty years one of the challenges is to develop an engine working with ethanol with the same performance and characteristics of gasoline engines functioning at low temperatures. In Brazil the production expansion of flex fuel engines is the main motivation for technology development and research to improve the engine cold start and functioning, when using ethanol. The use of gasoline as an auxiliary in the cold start system is now the main characteristic of this system. In this work the performance of a new cold start system is analyzed. Tests were performed in a vehicle and the results show the potential of the new technology.
Authors
- Luis Carlos Monteiro Sales - FPT- Fiat Powertrain Technologies
- Matheus Guilherme Franca Carvalho - FPT- Fiat Powertrain Technologies
- Luciano de Andrade Martins - FPT- Fiat Powertrain Technologies
- Daniela Pinto V. Rodrigues Cirilo - FPT- Fiat Powertrain Technologies
- Rudolf Huebner - Universidade Federal de Minas Gerais
- Jose Ricardo Sodre - Pontifica Universidade Cat¢lica de Minas Gerais
Citation
Sales, L., Carvalho, M., de Andrade Martins, L., Cirilo, D. et al., "Vehicle Application of Auxiliary Cold Start System with the Fuel Distributor and the Extra Electronic Fuel Injector," SAE Technical Paper 2010-36-0190, 2010, https://doi.org/10.4271/2010-36-0190.Also In
References
- Balat, M. Balat, H. 2009 “Recent trends in global production and utilization of bio-ethanol fuel” Applied Energy 86 2009 2273 2282
- Brunocilla, M. Lepsch, F. “Influence of Hot Fuel Injection on Air/Fuel Mixture Preparation and Effects on Flex Fuel Engines,” SAE Technical Paper 2006-01-2619 2006 10.4271/2006-01-2619
- Short, J.C. Joseph, Y. Cavotta, M. “Thermal Modeling for Heated Tip Injectors,” SAE Technical Paper 2010-01-1264 2010 10.4271/2010-01-1264
- Silva, N.R. Sodré, J.R. “Using Additive to Improve Cold Start in Ethanol-Fuelled Vehicles,” SAE Technical Paper 2000-01-1217 2000 10.4271/2000-01-1217
- Sales, L.C.M. Sodré, J.R. Huebner, R. Maia, C.B. “Distribution of the Fuel Flow in a Cold Start System Using an Electronic Fuel Injector,” SAE Technical Paper 2007-01-2706 2007 10.4271/2007-01-2706
- Owen, K. Coley, T. “Automotive Fuels Reference Book-Second Edition,” SAE International Warrendale, PA 978-1-56091-589-8 1995
- Turner, J.W.G. Pearson, R.J. Holland, B. Peck, R. “Alcohol-Based Fuels in High Performance Engines,” SAE Technical Paper 2007-01-0056 2007 10.4271/2007-01-0056
- Annand, W.V.D. Gulder, O.L. 1980 “Exhaust Emissions and Cold Starting of a Four-Cylinder Engine Using Methanol as Fuel” Proc. Instn. Mehc. Engrs. 194 139 143
- Kito, B.T. Pacas, A.D. Selim, S. Cowley, S.W. 1998 “Properties of an Ethanol-Diethyl Ether-Water Fuel Mixture for Cold-Start Assistance of an Ethanol-Fuelled Vehicle” American Chemical Society Colorado, USA
- Iwai, N. Nagai, K. Yasuda, H. Ayusawa, T. et al. “A Study on Cold Startability and Mixture Formation of High-Percentage Methanol Blends,” SAE Technical Paper 880044 1988 10.4271/880044
- Sales, L.C.M. Sodré, J.R. “Optimized Cold Start Auxiliary System for Emissions Reduction in Ethanol-Fuelled Engines,” SAE Technical Paper 2002-01-2690 2002 10.4271/2002-01-2690
- Sales, L.C.M. Sodré, J.R. 2003 “Reducing Exhaust Emissions in Ethanol-Engines During Cold Start Combustion Science and Technology, USA v 8 1535 1550
- Haahtela, O. Decker, G. “Present and Future Fuels and Lubricants in Cold Climate Operation,” SAE Technical Paper 890032 1989 10.4271/890032