This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Integration of a Microtubular Solid Oxide Fuel Cell into a Mini-UAV: Design and Simulation of Power System Architecture
Technical Paper
2010-01-1776
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Power Systems Conference
Language:
English
Abstract
Mini UAVs in the ≺20 kg category are widely operated by military and civilian organizations, usually for surveillance purposes, and many are electrically powered for low acoustic and infra-red observability. Despite recent improvements in Lithium Polymer battery technology, endurance is still usually limited to around 1 hour for fixed wing vehicles. For operational reasons, it is desirable to increase endurance and fuel cells can provide the high energy density necessary to do this.
Many examples of PEMFC (Polymer Electrolyte Membrane Fuel Cell)-powered UAVs have been flown in recent years, all relying on a supply of hydrogen on board the UAV, giving the usual safety and weight concerns surrounding hydrogen storage. Solid oxide fuel cells (SOFCs) operate at a sufficiently high temperature to allow some flexibility in fuel source; in particular microtubular solid oxide fuel cell (mSOFC) stacks have been developed that run on methane and propane, gases that are easier to store and more readily available than hydrogen. mSOFC technology also offers the potential for higher efficiencies than PEMFCs.
Some examples of mSOFC-powered UAVs do exist, but these are aircraft developed and flown in an R&D context, not operational vehicles. This project aims to surmount and document the issues surrounding integration of an mSOFC power system into an existing UAV used in its operational environment. It also serves to provide a stimulus for the further development of mSOFC technology, which shows good potential but currently lags PEMFC technology by a number of years.
This paper presents initial modeling results from a 3-year project to integrate a propane-powered microtubular solid oxide fuel cell power system into an existing (and operational) electrically powered mini UAV.
Authors
Citation
Turner, C., "Integration of a Microtubular Solid Oxide Fuel Cell into a Mini-UAV: Design and Simulation of Power System Architecture," SAE Technical Paper 2010-01-1776, 2010, https://doi.org/10.4271/2010-01-1776.Also In
References
- Bradley, Thomas H. Moffit, Blake A. Fuller, Thomas F. Mavris, Dimitri Parekh, David “Design Studies for Hydrogen Fuel Cell Powered Unmanned Aerial Vehicles” AIAA paper 2008-6413 Aug 2008
- Howe, K.S. Kendall, K. “Microtubular SOFCs - Review of Properties and Performance” The European Fuel Cell Forum 2010 Lucerne, Switzerland
- Thompson, G. “Improving the Consistency of Microtubular Solid Oxide Fuel Cells for Methane Fuelled Stacks” 2010 University of Birmingham
- Mazumder, Sudip K. Acharya, Kaustuv Haynes, Comas Lamar Williams, Robert JR. von Spakovsky, Michael R Nelson, Douglas J Rancruel, Diego F Hartvigsen, Joseph Gemmen, Randy S “Solid-Oxide-Fuel-Cell Performance and Durability: Resolution of the effects of Power-Conditioning Systems and Application Loads” IEEE transactions of Power Electronics 19 5 Sept 2004
- Smart Electric Drives Modelica library from Dynasim and Arsenal research http://www.3ds.com/fileadmin/PRODUCTS/CATIA/DYMOLA/PDF/dymola-smart-electric-drives-library.pdf
- Modelica Standard Library available from the Modelica Association http://www.modelica.org/libraries/Modelica/
- Wang, Caisheng Nehrir, M Hashem “A Physically Based Dynamic Model for Solid Oxide Fuel Cells” IEEE Transactions on Energy Conversion 22 4 Dec 2007
- Larminie, J Dicks, A “Fuel Cell Systems Explained” Second Wiley 2003