This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Dimensions on Vibration-Damping Capacity of a Brake Disc
Technical Paper
2010-01-1693
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Regarding the vibrational characteristics of a brake disc causing brake squeal, there are two factors: eigenmode alignment (or natural frequencies) and damping capacity. Focusing on the effects of dimensions on damping capacity of a brake disc, intensive CAE experiments for analyzing the effects were conducted. It was found that disc damping capacity can be increased independently of natural frequency by modifying disc dimensions. It was also found that peak accelerance obtained from a frequency-response function of a brake disc is an effective parameter for evaluating damping capacity of a brake disc.
Recommended Content
Authors
Topic
Citation
Okamura, T. and Yumoto, H., "Effect of Dimensions on Vibration-Damping Capacity of a Brake Disc," SAE Technical Paper 2010-01-1693, 2010, https://doi.org/10.4271/2010-01-1693.Also In
References
- Ostermeyer, G.-P. “On Tangential Friction Induced Vibrations in Brake Systems,” SAE Int. J. Passeng. Cars - Mech. Syst 1 1 1251 1257 2008 10.4271/2008-01-2580
- Lee, L. Gesch, E. “Discussions on Squeal Triggering Mechanisms - A Look beyond Structural Stability SAE Technical Paper 2009-01-3012 2009 10.4271/2009-01-3012
- Ouyang, H. Nack, W. Yuan, Y. Chen, F. “On Automotive Disc Brake Squeal Part II: Simulation and Analysis,” SAE Technical Paper 2003-01-0684 2003 10.4271/2003-01-0684
- Yumoto, H. Okamura, T. “Integrated Brake Disc Design System,” SAE Technical Paper 2006-01-0693 2006 10.4271/2006-01-0693
- Okamura, T. Yumoto, H. Imasaki, M. “Factorial Effect Analysis of Material and Dimensional Properties of Brake Discs for Reducing Variation in Natural Frequencies,” SAE Technical Paper 2008-01-2533 2008 10.4271/2008-01-2533
- Kurikuma, T. Akita, N. Kito, M. “Development of a Cast Iron with High Damping Capacity and Thermal Diffusivity for Disk Brake Rotor” Proceeding of JFS meeting (in Japanese) July 2 1997
- Ganguly, S. Tong, H. Dudley, G. Connolly, F. et al. “Eliminating Drum Brake Squeal by a Damped Iron Drum Assembly,” SAE Technical Paper 2007-01-0592 2007 10.4271/2007-01-0592
- Malosh, J.B. “Disc Brake Noise Reduction Through Metallurgical Control of Rotor Resonances,” SAE Technical Paper 982236 1998 10.4271/982236
- Kurikuma, T. Makimura, Y. Tada, M. Kobayashi, T. “Effects of Graphite Morphology and Matrix Microstructure on Damping Capacity, Tensile Strength, and Young's Modulus of Casting Irons” Journal of JFS (in Japanese) 68 10 876 882 1996
- Cho, H. Ueno, K. Kobayashi, Y. Akune, H. Miyazaki, A. “Rotor for Disk Brake and Producing Method Therefor” Published patent application, JP 2001-123241 2001
- Ihm, M. “Introduction to Gray Cast Iron Brake Rotor Metallurgy” SAE Brake Colloquium Tutorial 2003
- Japanese Industrial Standards “The testing method for internal friction of fine ceramics at elevated temperatures - Part 2 : Flexural resonance method” JIS R 1642-2 2002
- Daudi, A. R. Dickerson, W. E. “Ultra Q™ Process” SAE Technical Paper 2000-01-2760 2000
- Okamura, T. Yumoto, H. “Fundamental Study on Thermal Behavior of Brake Discs,” SAE Technical Paper 2006-01-3203 2006 10.4271/2006-01-3203
- Miller, E.J. “Damping Capacity of Pearlitic Gray Iron and Its Influence on Disc Brake Squeal Suppression,” SAE Technical Paper 690221 1969 10.4271/690221
- Dessouki, O. Lowe, B. Riefe, M. “Friction Damped Disc Brake Rotor,” SAE Technical Paper 2010-01-0077 2010 10.4271/2010-01-0077
- Dunlap, K.B. Riehle, M.A. Longhouse, R.E. “An Investigative Overview of Automotive Disc Brake Noise,” SAE Technical Paper 1999-01-0142 1999 10.4271/1999-01-0142
- Kappagantu, R.V. “Vibro-Impact Rotor Dampers For Brake Squeal Attenuation - Towards An Insulator Free Design to Quell Squeal,” SAE Int. J. Passeng. Cars - Mech. Syst 1 1 1188 1193 2008 10.4271/2008-01-2549 2008