This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Filling the Gaps in Brake NVH Development
Technical Paper
2010-01-1684
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
NVH development is an important part of modern brake product development plans. This paper analyzes a typical NVH development process and identifies gaps in available development technologies and processes that when filled can improve the brake NVH development effort. The paper also discusses how the disciplines of simulation, component testing, dynamometer testing, and vehicle testing are currently integrated and proposes more effective processes of development. The paper identifies opportunities for contributions from professional societies and standardization organizations, vendors of test equipment and software, test laboratories, university research centers as well as brake suppliers' engineering centers to improve the engineering toolbox and fill the gaps in brake NVH development.
Recommended Content
Technical Paper | SAE Low-Frequency Brake Noise Test Procedure |
Technical Paper | The Development of a Brake Insulator Damping Measurement Procedure |
Technical Paper | Brake Rotor Modal Frequencies: Measurement and Control |
Authors
Citation
Abdelhamid, M., "Filling the Gaps in Brake NVH Development," SAE Technical Paper 2010-01-1684, 2010, https://doi.org/10.4271/2010-01-1684.Also In
References
- Afaneh, A.H. Abdelhamid, M.K. Qatu, M.S. “Engineering Challenges with Vehicle Noise and Vibration in Product Development,” SAE Technical Paper 2007-01-2434 2007 10.4271/2007-01-2434
- Qatu, M.S. Abdelhamid, M.K. Pang, J. Sheng, G. “Overview of automotive noise and vibration” Int. J. Vehicle Noise and Vibration 5 1 / 2 2009 1 35 2009
- SAE International Surface Vehicle Recommended Practice “Disc and Drum Brake Dynamometer Squeal Noise Matrix,” J2521 Jan. 2006
- Oyang, H. Nack, W. Yuan, Y. Chen, F. “Numerical analysis of automotive disc brake squeal: a review,” Int. J. Vehicle Noise and Vibration 1 3/4 207 230 2005
- Yue, Y Zhang, L. “A Study of Effects of Brake Contact Interfaces on Brake Squeal,” SAE Int. J. Passeng. Cars - Meek Syst 2 1 1506 1413 2009 10.4271/2009-01-2100
- Liu, W. “A Note on Using Accelerometer Measurement to Confirm Noise Events during Dynamometer Test,” 26th SAE brake colloquium 2008
- Blaschke, P. Mauer, G. “Latest Innovation in Automatic Brake Noise Identification and in Correlating Dynamometer with Vehicle Results,” 26th SAE Brake colloquium 2008
- Abdelhamid, M.K. Bray, W. “Braking Systems Creep Groan Noise: Detection and Evaluation,” SAE Technical Paper 2009-01-2103 2009 10.4271/2009-01-2103
- SAE International Surface Vehicle Recommended Practice “Automotive Brake Noise and Vibration Standard Nomenclature,” SAE Standard J2786 Oct. 2009
- Abendroth, H. Haverkamp, M Hoffrichter, W. Blaschke, P. et al. “Current and New Approaches for Brake Noise Evaluation and Rating,” SAE Int. J. Passeng. Cars -Meek Syst 2 2 32 45 2009 10.4271/2009-01-3037
- Lindberg, E. Hörlin, N.-E. Göransson, P. “Experimental Study of Wire Brush Brake Noise on a Personal Car,” 2009 SAE Brake Colloquium October 2009
- Koshikawa, Y. Izumihara, T. Ikeda, H. Naito, H. “Development of a Numerical Model for Clunk Noise,” 2009 SAE Brake Colloquium October 2009
- Stanef, D. Papinniemi, A. Zhao, J. “From Prototype to Production - The Practical Nature of Brake Squeal Noise,” SAE Technical Paper 2006-01-3217 2006 10.4271/2006-01-3217
- Zöller, T. Attia, F. “Perception Thresholds for Sinusoidal and Impulsive Vibration on the Brake Pedal,” Proc. of DAGA 2006 Braunschweig, Germany 2006
- Abdelhamid, M. Kraus, T. “Evaluation of Modal Testing Use as Means of Controlling Brake Rotors Quality,” NoiseCon08 paper NC08 023 2008
- Chang, W. Shi, T. “Early Noise Analysis for Robust Quiet Brake Design,” SAE Technical Paper 2009-01-0858 2009 10.4271/2009-01-0858
- Mahajan, S.K. Denys, E. Bae, J.-C. Shi, T.S. et al. “Pad Insulator Modeling for Brake Squeal Analysis,” SAE Technical Paper 2005-01-2314 2005 10.4271/2005-01-2314
- SAE International Surface Vehicle Recommended Practice “Automotive Disc Brake Pad Natural Frequency and Damping Test,” SAE Standard J2598 Jan. 2006
- SAE International Surface Vehicle Recommended Practice “Dynamometer Low-Frequency Brake Noise Test Procedure,” Draft J3002
- Thompson, J. “A Status Report on the Work of the SAE Brake NVH Standards Committee,” 26th SAE Brake colloquium 2008
- Riefe, M.T. Thompson, J.K. Lowe, B. Rogus, M. et al. “SAE Low-Frequency Brake Noise Test Procedure,” SAE Technical Paper 2010-01-1696 2010 10.4271/2010-01-1696