This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Spray Characteristics Study of DMF Using Phase Doppler Particle Analyzer

Journal Article
2010-01-1505
ISSN: 1946-3995, e-ISSN: 1946-4002
Published May 05, 2010 by SAE International in United States
Spray Characteristics Study of DMF Using Phase Doppler Particle Analyzer
Sector:
Citation: Tian, G., Li, H., Xu, H., Li, Y. et al., "Spray Characteristics Study of DMF Using Phase Doppler Particle Analyzer," SAE Int. J. Passeng. Cars – Mech. Syst. 3(1):948-958, 2010, https://doi.org/10.4271/2010-01-1505.
Language: English

References

  1. Roman-Leshkov Yuriy Barrett Christopher J. Liu Zhen Y. Dumesic James A. Production of dimethylfuran for liquid fuels from biomass-derived carbohydrates Nature 447 2007 7147 982
  2. Binder Joseph B. Raines Ronald T. Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals J. AM. CHEM. SOC. 9 2009 131 5
  3. Pitcher G. Wigley G. 1994 Simultaneous Two-Component Velocity and Dropsize Measurements in a Combusting Diesel Fuel Spray Seventh International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal
  4. Wigley G. Hargrave G.K. Heath J. 1998 A High Power, High Resolution LDA/PDA System Applied to Dense Gasoline Direct Injection Sprays 9th International Symposium on Applications of Laser Techniques to Fluid Mechanics Lisbon, Portugal
  5. Julien, LACOSTE 2006 Characteristics of Diesel Sprays at High Temperatures and Pressures School of Engineering, University of Brighton
  6. 2005 LDV/PDPA System: Instruction Manual, P/N 1990013, Revision D TSI
  7. Saitoh, H. Uchida, K. “Difference of Spray Mixture Formation between Gas-Oil and Ethanol in the Constant Volume Electrical Heating Chamber,” SAE Technical Paper 2007-01-3617 2007
  8. Kapus, P.E. Fuerhapter, A. Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines - Potential and Challenges,” SAE Technical Paper 2007-01-1408 2007
  9. Hemdal, S. Denbratt, I. Dahlander, P. Wärnberg, J. “Stratified Cold Start Sprays of Gasoline-Ethanol Blends,” SAE Int. J. Fuels Lubr 2 1 683 696 2009
  10. Aleiferis, P.G. Malcolm, J.S. Todd, A.R. Cairns, A. et al. “An Optical Study of Spray Development and Combustion of Ethanol, Iso-Octane and Gasoline Blends in a DISI Engine,” SAE Technical Paper 2008-01-0073 2008
  11. Serras-Pereira, J. Aleiferis, P.G. Richardson, D. Wallace, S. “Characteristics of Ethanol, Butanol, Iso-Octane and Gasoline Sprays and Combustion from a Multi-Hole Injector in a DISI Engine,” SAE Int. J. Fuels Lubr 1 1 893 909 2008
  12. Hu, C. Jian-Xin, W. Shi-Jin, S. Xin-Liang, A. et al. “Effects of Ethanol in Ester-Ethanol-Diesel Blended Fuels on Spray Behavior and PM Emission,” SAE Technical Paper 2006-01-0236 2006
  13. Hiroyasu, H. Kadota, T. “Fuel Droplet Size Distribution in Diesel Combustion Chamber,” SAE Technical Paper 740715 1974
  14. Shimizu, M. Arai, M. Hiroyasu, H. Measurements of Breakup Length in High Speed Jet Bulletin of JSME 1984 27 230
  15. Tabata, M. Fujii, H. Arai, M. Hiroyasu, H. Mean Drop Diameter of a Diesel Spray in a Vaporizing process JSME International Journal 1991 34 3
  16. Mitroglou N. Nouri J. M. Gavaises M. Arcoumanis C. Spray Characteristics of a Multi-hole Injector for Direct-Injection Gasoline Engines Int. J. Engine Res. 2006 7 3 255 270
  17. Chu, Cho-Chone C. 1986 One-Dimensional Transient Fluid Model for Fuel-Coolant Interaction Analysis University of Wisconsin-Madison

Cited By