This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Experiences with Experimental Determination of the Yield Locus and its Evolution for Advanced High Strength Steels
Journal Article
2010-01-0976
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Citation:
Sriram, S., Zhu, H., and Yan, B., "Experiences with Experimental Determination of the Yield Locus and its Evolution for Advanced High Strength Steels," SAE Int. J. Mater. Manuf. 3(1):658-669, 2010, https://doi.org/10.4271/2010-01-0976.
Language:
English
References
- Tresca H. Comptes Rendus Acad. Sci. Paris 59 1864 754
- von Mises R. Gott. Nach., math-phys., Klasse 1913 582
- Hill R. Proc. Roy. Soc. London 193A 1948 281
- Hill R. “Theoretical Plasticity of Textured Aggregates” Math. Proc. Camb. Phil. Soc. 85 1979 179 191
- Logan R. Hosford W. F. Int. J. Mech. Sci. 22 1980 419 430
- G'sell, C. Boni, S. Shrivastava, S. J. Mater. Sci. 18 903 918 1983
- Miyauchi, K. “Bauschinger Effect in Planar Shear Deformation of Sheet Metals” Advanced Technology of Plasticity, Proc. 1st Int. Conf. Technology of Plasticity Tokyo The Japan Society for Technology of Plasticity 1984 623 628
- Hu, Z. Rauch E.F. Teodosiu, C. Int. J. Plasticity 8 839 856 1992
- Lee, D. Backofen, W.A. Trans. TMS-AIME 236 1077 1084 1966
- Maeda, Y. Yanagawa, M. Barlat, F. Chung, K. Hayashida, Y. Hattori, S. Matsui, K. Brem, J.C. Lege, D.J. Murtha, S.J. Ishikawa, T. Int. J. Plasticity 14 301 318 1998
- Ferron, G. Makinde, A. J. J. Testing Eval. 16 253 256 1988
- Makinde, A. Thibodeau, L. Neale, K.W. Exp. Mech. 32 138 144 1992
- Boehler, J.P. Demmerle, S. Koss, S. Exp. Mech. 34 1 9 1994
- Lin, S.B. Ding, J.L. Int. J. Plasticity 11 583 604 1995
- Shiratori, E. Ikegami, K. J. Mech. Phys Solids 16 373 394 1968
- Kreißig, R. Schindler, J. Acta Mech. 65 169 179 1986
- Müller, W. Pöhlandt, K. J. Mater. Processing Technol. 60 643 648 1996
- Hoferlin, E. Van Bael, A. Van Houtte, P. Steyaert, G. De Maré, C. J Mater Processing Technol. 80/81 545 550 1998
- Borsutzki, M. Keßler, L. Sonne, H-M. “Kennzeichnung des Verfestigungsverhaltens von Werkstoffen mit der Biaxialprüfung” Werkstoffprüfung 2002, Proc. DVM-Conference Bad Nauheim 2002 186 192
- Kuwabara, T. Ikeda, S. Kuroda, T. J. Mater. Processing Technol. 80/81 517 523 1998
- Kuwabara, T. Kuroda, M. Tvergaard, V. Nomura, K. Acta Mater. 48 2071 2079 2000
- Kuwabara, T. Van Bael, A. Iizuka, E. Acta Mater. 50 3717 3729 2002
- Tozawa, Y. “Plastic Deformation Behavior under Conditions of Combined Stress” Mechanics of Sheet Metal Forming Koistinen D.P. Wang N-.M. New York Plenum Press 1978 81 110
- Kessler, L. Gerlach, J. “The Impact of Material Testing Strategies on the Determination and Calibration of Different FEM Material Models” IDDRG Working Groups 2006
- An Y. G. Vegter H. “The difference between bulging test and through-thickness compression test for sheet steels and Al alloys” IDDRG Working Groups 1998
- An Y. G. Vegter H. “Experimental study of the friction behavior in the compression test” IDDRG Working Groups 1999
- Ofenheimer A. Kitting D. Iadicola M. Foecke T. “A critical review of different experimental approaches to calibrate numerical sheet forming simulations” SAE Paper 2007-01-1685
- Vegter H. Ten Horn C. H. L. J. An Y. Atzema E. H. Piljman H. H. Van den Boogaard T. H. Huetink H. “Characterization and modeling of the plastic material behavior and its application in sheet metal forming simulations” COMPLAS VII Barcelona 2003
- Arcan M. Hashin Z. Voloshin A. “A method to produce uniform plane stress states with applications to fiber-reinforced materials” Experimental Mechanics 1977 141 146
- The Oklahoma State University, Department of Mechanical Engineering
- Heitman W. ArcelorMittal Private Communication
- Hosford W. F. Caddell R. M. Metal Forming-Mechanics and Metallurgy
- Sadagopan S. Urban D. “Formability Characterization of a New Generation of High Strength Steels” AISI/DOE Report No. TRP 0012 March 2003