This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Virtual and Physical Testing for Design Engineering of Intelligent Vehicles
Technical Paper
2009-26-0065
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SIAT 2009
Language:
English
Abstract
The increasing contribution of electronic and mechatronic content to the vehicle value requires rethinking the vehicle design and engineering processes. The present paper describes an approach hereto, based on virtual and physical prototype testing of heterogeneous systems. A key element is the integration between 3D geometry-Based Models (FE, MBS) and 1D multi-physics system-theoretic models for simulating complex devices (hydraulics, actuators, specific sensors) and processes (combustion, thermal, flow). Embedding control laws paves the way to Model-ln-the-Loop (MIL) and Software-In-the-Loop (SIL) concepts. By linking the virtual models to hardware systems on a physical test-bench, the static and dynamic performance of the rest of the vehicle system (suspension, body…) can be represented, enabling “Hardware in the Loop testing” (HIL). The “Vehicle-in-the-Loop” (VIL) validation finally allows the evaluation of all system dependencies and system interconnections. The discussion is illustrated with typical examples in vehicle engineering.
Recommended Content
Authors
Topic
Citation
van der Auweraer, H., Anthonis, J., and Leuridan, J., "Virtual and Physical Testing for Design Engineering of Intelligent Vehicles," SAE Technical Paper 2009-26-0065, 2009, https://doi.org/10.4271/2009-26-0065.Also In
References
- Valsan, Anil “Trends, Technology Roadmaps and Strategic Market Analysis of Vehicle Safety Systems in Europe” International Automotive Electronics Congress Oct. 24 Paris (F) 2006
- McKinsey's Automotive & Assembly Practice, HAWK 2015 Knowledge-based changes in the automotive value chain McKinsey 2004
- JSAE, The automobile in the Year 2030, Society of Automotive Engineers of Japan 2007
- System Design: New Product Development for Mechatronics, Aberdeen Group www.aberdeen.com
- Laurgeau, C “Present and Future of Intelligent Transportation Systems” Proc. ICAT 2008, Int. Conf. on Automotive Technologies Istanbul (TR) 2008
- Vahidi, A., et al., “Research Advances in Intelligent Collision Avoidance and Adaptive Cruise Control” IEEE Trans. Intell. Transp. Syst. 4 3 143 153
- European Commission “Towards Europe-wide Safer, Cleaner and Efficient Mobility: The First Intelligent Car Report” Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and the Committee of the Regions, COM(2007)541 2007
- Costlow, Terry “Managing Software Growth” Automotive Engineering International 2008
- Van der Auweraer, H. et al., “Hybrid Testing in Aerospace and Ground Vehicle Development” “Hybrid Simulation: Theory, Implementation and Applications” 203 214 2008
- Kvasnicka, P., et al., “Comprehensive Approach to the Chassis Control Development” SAE Paper 2006-01-1280 2006
- Prescott, W. C Laughlin, J. A. “Implementation and Usage of Design Sensitivity Analysis in Multibody Dynamics Software” Proc. Eccomas, Thematic Conference on Multibody Dynamics Milan, Italy 2007
- Gubitosa, M. De Cuyper, J Cibrario, V. “Optimized Design Method of Vehicle Suspension Systems using a Reverse Engineering Approach” Paper IMECE2008-66623, Proc. IMECE2008, (MA-USA) Boston 2008
- De Cuyper, J. et al., “Vehicle Dynamics Control - A Case Study in LMS Virtual.Lab Motion” Proc. 4th Asian Conference on Multibody Dynamics, Seogwipo-city Korea 2008
- Alirand, M. Botelle, E Sau, J. “Modeling A Force Control Actuator for Semi Active Car Dampers- Basics” 16th IAVSD Symposium, Dynamics of Vehicles on Roads and Tracks Pretoria (SA) 1999
- He, Y McPhee, Y. “Multidisciplinary design optimization of mechatronic vehicles with active suspensions” Journal of Sound and Vibration 283 217 241 2005
- Lauwerys, C Swevers, J Sas, P. “Robust linear control of an Active Suspension on a Quarter Car Test-Rig” Control Engineering Practice 577 586 2005
- Swevers, J., et al, “A Model-Free Control Structure for the On-Line Tuning of the Semi-Active Suspension of a Passenger Car” Mechanical Systems and Signal Processing 21 1422 1436 2007
- http://www.mymosa.eu/
- Cossalter Vittore Lot, Roberto “A Motorcycle Multi-Body Model for Real Time Simulations Based on the Natural Coordinates Approach” Vehicle System Dynamics Vol. 37 No. 6 423 447 2002
- Botellee, E Lebrun, M. “Environment for Conceptual Design of Motorcycles using AMESim” Proc. 2-nd Int. Conf. on Development and Trends of Motorcycles Munich (DE) 2003
- Moreno, D., et al., “MYMOSA - Towards the Simulation of Realistic Motorcycle Manoeuvres by Coupling Multibody and Control Techniques” Paper IMECE2008-67297, Proc. IMECE2008 Boston (MA-USA) 2008
- de Oliveira, L. P. R., et al., “Active Sound Quality Control of Engine Induced Cavity Noise” Mechanical Systems and Signal Processing 2008
- Van der Auweraer, H., et al., “Virtual Prototyping for Sound Quality Design of Automobiles“” Sound and Vibration Vol. 41 No. 4 Apr. 2007 26 31 2007
- Van der Auweraer, H., et al., “CAE-based Design of Active Noise Control Solutions” SAE Paper 2007-26-032 , Proc. SIAT 2007 Pune, India 2007
- http://www.smart-structures.eu/
- Bichet, R, et al., “MODELISAR, From System Modeling to S/W running on the Vehicle” ITEA2 Full Project Proposal 2007
- http://www.modelica.org/
- http://www.autosar.org/find02_07.php
- Syed, F. Nallapa, R Ramaswamy, D. “Integrated Modeling Environment for Detailed Algorithm Design, Simulation and Code Generation” SAE Paper 2007-01-0274
- Saerens, B., et al., “Model Predictive Control of Automotive Powertrains - First Experimental Results” Proc. 47th IEEE Conference on Decision and Control Dec. 9–11 2008
- Ramaswamy, D., et al., “Walt Stuart A Case Study in Hardware-ln-the-Loop Testing: Development of an ECU for a Hybrid Electric Vehicle” SAE Paper No. 2004-01-0303 , Proc. SAE 2004 World Congress and Exhibition Detroit (MI-USA) March 2004
- Lynn, A., et al., “Modeling Hydraulic Regenerative Hybrid Vehicles Using AMESim and Matlab/ Simulink” Proceedings of SPIE, Enabling technologies for simulation science. Conference No9, Orlando FL, USA, (2005) vol. 5805 24 40 USA 2005
- Nuglisch, H Dupont, H. “Global Vehicle System Simulation as Basis for an Analysis of Vehicle Energy Consumption” Proc. 4th Braunschweig Symposium on Hybrid Vehicles and Energy Management 2007