This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
An Experimental Study Using Single and Multiple Injection Strategies in a Diesel Fuelled HCCI Engine with a Common Rail System
Technical Paper
2009-26-0028
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SIAT 2009
Language:
English
Abstract
In this work, a single-cylinder, water-cooled engine was operated in the Homogenous Charge Compression Ignition (HCCI) mode with diesel as the fuel. Conventional as well as Common Rail Injection (CRI) systems were employed to study the influence of different injection strategies. The injection timing was fixed at 90° crank angle bTDC with the conventional injection system for HCCI operation based on brake thermal efficiency. With the conventional system, the BMEP range was 2.2 to 4.3 bar with a single-axial-hole injector. However, in this case, the brake thermal efficiency was about 30% lower than the CI mode. In the case of the CRI system, a specially developed single-hole nozzle with single and multiple injection strategies was used. Here, there was an improvement in the brake thermal efficiency and emissions were also under control. The BMEP range was only 1 to 3 bar. The results showed that by using multiple (3 pulses) injection, with the last pulse around the formation of the cool flame, significant improvements in HCCI operation could be obtained.
Authors
Topic
Citation
Swami Nathan, S., Mallikarjuna, J., and Ramesh, A., "An Experimental Study Using Single and Multiple Injection Strategies in a Diesel Fuelled HCCI Engine with a Common Rail System," SAE Technical Paper 2009-26-0028, 2009, https://doi.org/10.4271/2009-26-0028.Also In
References
- Glassman, I. “Combustion” Third Edition Academic Press London 1996
- Onishi, S., et al., Active Thermo- Atmosphere Combustion (ATAC) - A New Combustion Process for Internal Combustion Engines SAE Paper No. 790840 1979
- Najt, P. M Foster, D. E. Compression-Ignited Homogeneous Charge Combustion SAE Paper No 830264 1983
- Ryan, T. W Callahan, T. J. Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel SAE Paper No. 961160 1996
- Gray, A. W Ryan, T. W. III, Homogeneous Charge Compression Ignition (HCCI) of Diesel Fuel SAE Paper No. 971676 1997
- Hashizume, T., et al., “Combustion and Emission Characteristics of Multiple Stage Diesel Combustion” SAE Paper No. 980505 1998
- Suzuki, H. Koike, N Odaka, M. “Combustion Control Method of Homogeneous Charge Diesel Engines” SAE Paper No. 980509 1998
- Yokota, H., et al., A New Concept for Low Emission Diesel Combustion SAE Paper No. 970891 1997
- Thring, R. H. “Homogeneous Charge Compression Ignition (HCCI) Engines” SAE Paper No. 892068 1989
- Takeda, Y. Nakagome, K Niimura, K. “Emission Characteristics of Premixed Lean Diesel Combustion with Extremely Early Staged Fuel Injection” SAE Paper No. 961163 1996
- Akagawa, H., et al., “Approaches to Solve Problems of the Premixed Lean Diesel Combustion” SAE Paper No. 1999-01-0183 1999
- Harada, A., et al., “The Effects of Mixture Formation on Premixed Lean Diesel Combustion” SAE Paper No. 980533 1998
- Suzuki, T., et al., “A New Concept for Low Emission Diesel Combustion” SAE Paper No. 970891 1997
- Iwabuchi, Y., et al., Trial of New Concept Diesel Combustion System - Premixed Compression-Ignition Combustion SAE Paper No. 1999-01-0185 1999
- Hasegawa, R Yanagihara, H. “HCCI Combustion in DI Diesel Engine” SAE Paper No. 2003-01-0745 2003
- Walter, B Gatellier, B “Development of the High Power NADI Concept Using Dual Mode Diesel Combustion to Achieve Zero Nox and Particulate Emissions” SAE Paper No. 2002-01-1744 2002
- Neely, G. D. Sasaki, S Leet, J. A. “Experimental Investigation of PCCI-DI Combustion on Emissions in a Light-Duty Diesel Engine” SAE Paper No. 2004-01-0121 2004
- Zhang, Wo. Nishida, K. Gao, J. “An Experimental Study on Mixture Formation Process of Flat Wall Impinging Spray Injected by Micro-Hole Nozzle Under Ultra-High Injection Pressures” SAE Paper No. 2008-01-1601 2008
- Su, H. Mosbach, et al. “Two-Stage Fuel Direct Injection in a Diesel-Fuelled HCCI Engine” SAE Paper No. 2007-01-1880 2007