This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of a Procedure for Multi-Axial Road Load Reproductions on an Exhaust Test Rig
Technical Paper
2009-01-2030
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
OEM's increase the pressure on their suppliers to design, develop and test their products within a short time period. This requires design ‘first-time-right’ philosophy and advanced numerical and experimental methods. Four steps are required to experimentally asses the durability of exhaust systems. Environmental loads and strain references are acquired on the test track. This data is analyzed and damaging are sections retained. These sections are then reproduced on a test rig. During this reproduction, strain is measured at the reference locations and the damage is calculated and compared with the test track data.
Recommended Content
Technical Paper | Improvements In Converter Durability and Activity via Catalyst Formulation |
Ground Vehicle Standard | Marine Exhaust Hose |
Technical Paper | Designed Experiment to Evaluate the Canning Strength of Various High Cell Density / Ultra Thin Wall Ceramic Monoliths |
Authors
Citation
De Coninck, F., Desmet, W., Sas, P., Hansenne, E. et al., "Development of a Procedure for Multi-Axial Road Load Reproductions on an Exhaust Test Rig," SAE Technical Paper 2009-01-2030, 2009, https://doi.org/10.4271/2009-01-2030.Also In
References
- Douthett J. Designing stainless exhaust systems Automotive Engineering USA 103 11 45 49 Nov 1995
- Cai C Liaw PK Ye M Yu J Recent developments in the thermo-mechanical fatigue life prediction of superalloys JOM 51 4 1995
- Chaboche JL Gallerneau F An overview of the damage approach of durability modelling at elevated temperature Fatigue Fract Eng Mater Struct 2001 24 405 18
- Charklauk E Bignonnet A Constantinescu A Dang Van K Fatigue Design of Structures Under Thermomechanical Loadings Fatigue Fract. Engng Mater. Struc. 25 1199 1206 2002
- Nsoft 2005 product manual, Ncode HBM Germany
- IST Instron Structural Testing Systems Advanced Rig for Testing Exhaust Lines - ARTEL Test Rig Manual
- Dual mast system for simulation testing
- De Cuyper Joris Linear feedback control for durability test rigs in the automotive industry K.U.Leuven 2006
- De Coninck Filip Multi-axial road reproductions for non-linear road noise models K.U.Leuven 2007
- De Coninck Filip Desmet W. Sas P. Hansenne E. Van Gucht Y. Lehaen B. Dedene L. Durability Assessment of Lightweight Stainless Steel Exhaust Systems International Conference on Noise and Vibration Engineering Leuven, Belgium 987 998
- De Coninck Filip Sas Paul Desmet Wim Determining the Important Degrees of Freedom in Road Reproductions SAE- 2007-01-2250