This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of a 1-D CPF Model to Simulate Active Regeneration of a Diesel Particulate Filter
Technical Paper
2009-01-1283
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A quasi-steady 1-dimensional computer model of a catalyzed particulate filter (CPF) capable of simulating active regeneration of the CPF via diesel fuel injection upstream of a diesel oxidation catalyst (DOC) or other means to increase the exhaust gas temperature has been developed. This model is capable of predicting gaseous species concentrations (HC's, CO, NO and NO2) and exhaust gas temperatures within and after the CPF, for given input values of gaseous species and PM concentrations before the CPF and other inlet variables such as time-varying temperature of the exhaust gas at the inlet of the CPF and volumetric flow rate of exhaust gas. Also, the model predicts the overall pressure drop across the CPF and its components and the filtration and oxidation processes of PM as functions of axial location in the CPF and time as well as secondary variables that are derived from the equations that are being solved for in the model (such as axial variation of PM cake layer thickness versus time). The mathematical equations and numerical techniques used in the development of this computer model are presented. Results from a comparison of this model to experiments conducted at MTU [1] are presented to validate the model. The model provides further understanding of the processes taking place inside a CPF during active regeneration by calculating various parameters related to the oxidation and filtration processes including the mass of PM in the filter PM cake and substrate wall as functions of axial location and time.
Recommended Content
Authors
Citation
Premchand, K., Johnson, J., and Yang, S., "Development of a 1-D CPF Model to Simulate Active Regeneration of a Diesel Particulate Filter," SAE Technical Paper 2009-01-1283, 2009, https://doi.org/10.4271/2009-01-1283.Also In
References
- Chilumukuru Krishna P. Arasappa Rohith Johnson John H. Naber Jeffrey D. 2009 “An Experimental Study of PM Thermal Oxidation Rates for a Catalyzed Particulate Filter during Active Regeneration” SAE, 2009-01-1474
- Bissett E. J. 1984 “Mathematical Model of the Thermal Regeneration of a Wall-flow Monolith Diesel Particulate Filter” Chem. Eng. Sci. 39 7/8 1233 1244
- Bissett E. J. Shadman F. 1985 “Thermal Regeneration of Diesel Particulate Monolith Filters” Am. Inst. Chem. Engrs. J. 31 5 753 758
- Garner C. P. Dent J. C. 1988 “A Thermal Regeneration Model for Monolithic and Fibrous Diesel Particulate Traps” SAE Transactions J. Passenger Cars 97 4 9 24
- Koltsakis G. C. Haralampous O. A. Dardiotis C. K. Samaras Z. C. Vogt C. –D. Ohara E. Watanabe Y. Mizutani T. 2005 “Performance of Catalyzed Particulate Filters without Upstream Oxidation Catalyst” SAE, 2005-01-0952
- Opris C. N. Johnson J. H. 1998 “A 2-D Computational Model Describing the Heat Transfer, Reaction Kinetics and Regeneration Characteristics of a Ceramic Diesel Particulate Trap” SAE, 980546
- Konstandopoulos A. G. Kostoglou M. Housiada P. Vlachos N. Zarvalis D. 2003 “Multichannel Simulation of Soot Oxidation in Diesel Particulate Filters” SAE, 2003-01-0839
- Law M. C. Clarke A. Garner C. P. 2005 “A Diesel Particulate Filter Regeneration Model with a Multi-step Chemical Reaction Scheme” Proc. IMechE 219 Part D: J. Auto. Engg.
- Mohammed Hasan Triana Antonio P. Yang Song-Lin Johnson John H. 2006 “An Advanced 1D 2-Layer Catalyzed Diesel Particulate Filter Model to Simulate: Filtration by the Wall and Particulate Cake, Oxidation in the Wall and Particulate Cake by NO 2 and O 2 , and Regeneration by Heat Addition” SAE, 2006-01-0467
- Premchand Kiran C. Johnson John H. Yang Song-Lin Triana Antonio P. Baumgard Kirby J. 2007 “A Study of the Filtration and Oxidation Characteristics of a Diesel Oxidation Catalyst and a Catalyzed Particulate Filter” SAE, 2007-01-1123
- Law M. C. Clarke A Garner C. P. Williams A. M. 2008 “A Finite-Volume-Based Two-Dimensional Wall-Flow Diesel Particulate Filter Regeneration Model” Proc. IMechE. 222 Part D: J. Auto. Engg.
- Koltsakis G. C. Dardiotis C. K. Samaras Z. C. Frey M. Wenninger G. Krutzsch B. Haralampous O. A. 2008 “Model-Based Optimization of Catalyst Zoning in Diesel Particulate Filters” SAE, 2008-01-0445
- Konstandopoulos G. A. Kostoglou M. Housiada P 2001 “Spatial Non-Uniformities in Diesel Particulate Trap Regeneration” SAE, 2001-01-0908
- Arasappa Rohith Premchand Kiran C. Chilumukuru Krishna P. Johnson John H. Naber Jeffrey D. Yang Song-Lin 2009 “The Filtration, Oxidation and Pressure Drop Characteristics during Active Regeneration of a Catalyzed Particulate Filter - 1D Model Study” SAE, 2009-01-1274
- Singh P. A. Thalagavara A. M. Naber J. D. Johnson J. H. Bagley S. T. 2006 “An Experimental Study of Active Regeneration of an Advanced Catalyzed Particulate Filter by Diesel Fuel Injection Upstream of an Oxidation Catalyst” SAE, 2006-01-0879
- Premchand Kiran C. 2006 “An Experimental and Modeling Study of the Filtration and Oxidation Characteristics of a Diesel Oxidation Catalyst and a Catalyzed Particulate Filter” Masters’ Thesis Michigan Technological University
- Versaevel P. Colas H. Rigaudeau C. Noirot R. Koltsakis G. C. Stamatelos A. M. 2000 “Some Empirical Observations on Diesel Particulate Filter Modeling and Comparison between Simulations and Experiments” SAE, 2000-01-0477
- Singh Nishanth Johnson John H. Parker Gordon G. Yang Song-Lin 2005 “Vehicle Engine After-treatment System Simulation (VEASS) Model: Application to a Controls Design Strategy for Active Regeneration of a Catalyzed Particulate Filter” SAE, 2005-01-0970
- NIST Chemistry WebBook, URL : http://webbook.nist.gov/chemistry/ National Institute of Standards and Technology