This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Sustainable Green Design and Manufacturing Requirements and Risk Analysis Within A Statistical Framework
Technical Paper
2009-01-1187
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A well-tested, integrated approach and toolset is introduced to sustainable green design and manufacturing engineering requirements and risk analysis within a statistical framework with practical, industrial case studies. The emphasis is put on the integration of advanced process modeling, customer requirements analysis, statistical methods and risk analysis. The objective of the effort presented is to create a generic and systematic green design and manufacturing architecture that is sustainable, as well as complies with set guidelines by the green mobility industry, following international quality standards, and extended lean six-sigma methods.
Recommended Content
Topic
Citation
Ranky, P., "Sustainable Green Design and Manufacturing Requirements and Risk Analysis Within A Statistical Framework," SAE Technical Paper 2009-01-1187, 2009, https://doi.org/10.4271/2009-01-1187.Also In
References
- Ranky, P.G. A 3D Multimedia Case: Component Oriented Disassembly Failure Risk Analysis www.cimwareukandusa.com CIMware USA, Inc. and CIMware Ltd. UK 1-872631-47-9 2001-2009
- Ranky, P.G. Eighteen ‘monozukuri-focused’ assembly line design and visual factory management principles, with Denso industrial examples Assembly Automation, Feature Article 27 1 2007 12 16 Emerald Group Publising Ltd
- Ranky, P.G. A 3D Multimedia Case: Component Oriented Disassembly User Requirements Analysis http://www.cimwareukandusa.com CIMware USA, Inc. and CIMware Ltd. UK 1-872631-50-9 2001-2009
- Ranky, P G. Ranky R. G. An Introduction to Concurrent/ Simultaneous Engineering CIMware 1996-2009 www.cimwareukandusa.com
- Ranky, P G An Introduction to Total Quality and the ISO90001 Standard within a Lean Six-sigma Framework An Interactive Multimedia eBook CIMware 1997-2009 www.cimwareukandusa.com
- Throop D R et al Automated incremental design FMEA Boeing Co. IEEE Aerospace Conference Proc. 2001 IEEE May 10-17 2001 73451 73458
- Ranky P G Interactive Multimedia for Engineering Education European Journal of Engineering Education 21 3 1996 273 293
- Ranky, P. G. Some Analytical Considerations of Engineering Multimedia System Design within an Object Oriented Architecture IJCIM (International Journal of CIM, Taylor & Francis, London, New York) 13 2 May 2000 204 214
- Ranky, P G Caudill, R. J. Limaye K. Alli, N. ChamyVelumani Satishkumar Bhatia Apoorva Lonkar Manasi A Web-enabled Virtual Disassembly Manager (web-VDM) for Electronic Product / Process Designers Disassembly Line Managers and Operators, a UML (Unified Modeling Language) Model of our Generic Digital Factory, and Some of Our Electronic Support System Analysis Tools ADAM IT (Advanced Design And Manufacturing) www.cimwareukandusa.com USA 5 3 May 2002
- Ranky, P.G. Das, S Caudill, R A Web-oriented Virtual Product Disassembly and Identification Method for DFE (Design for Environment) and Electronic Demanufacturers 2000 IEEE USA International Symposium on Electronics and the Environment IEEE (USA), and the Computer Society USA May 2000 San Francisco, CA, USA Conference Proceedings
- Ranky, P G. A Multimedia Web-based Flexible Manufacturing Knowledge Management Framework Japan-USA International Symposium on Flexible Automation ASME (American Society of Mechanical Engineers) July 2000 Ann Arbor, MI Conference Proceedings
- Ranky, P G. An Object Oriented Virtual Concurrent Engineering Model and Product Demonstrator Case Study Japan-USA International Symposium on Flexible Automation ASME (American Society of Mechanical Engineers) July 2000 Ann Arbor, MI Conference Proceedings
- Ranky, P.G One-Jeng Surjanhata, H Digital Educational Knowledge Assets International Engineering Education Conference August 2000 Taipei, Taiwan Conference Proceedings
- Ranky, P G Surjanhata Herli One-Jang Jeng Milano Geraldine The Design and Implementation of Digital Educational Knowledge Assets (DEKA) with Software Demonstration (An NJIT and Industry Sponsored R&D Project ASEE (American Society of Engineering Education) NJ Spring Conference April 2001
- Ranky, P G Virtual Concurrent & Multi-lifecycle Engineering Over the 3D Internet An invited cluster presentation, INFORMS International Conference USA July 2001
- Ranky, P G 3DVR Component-based User Requirements Analysis Methods and Software Tools for Collaborative Multi-lifecycle Engineering INFORMS International Conference USA July 2001
- Ranky, P G An Object Oriented Model and Cases of Design, Manufacturing, and IT Knowledge Management Over the 3D- enabled Web and Intranets INFORMS International Conference USA July 2001
- Ranky, P G A 3D Web-based Flexible Manufacturing and Demanufacturing Knowledge Management Model INFORMS International Conference Miami November 2001
- Ranky, P G The Design and Implementation of a Case-based Learning Library for Engineering, Management and IT with 3D web-objects Third Annual Faculty Best Practices Showcase, Invited Paper, NJ Higher Education Network, Proceedings NJIT Newark, NJ Nov 9 2001
- Dunkerley, G. Norton, N. Ranky, P.G. A Case-based Introduction to IMI Norgren's Reengineering Project at Kenilworth, UK www.cimwareukandusa.com CIMware USA, Inc. and CIMware Ltd. UK 1-872631-40-1 2001-2008
- Anastas, P. Zimmerman, J. “Design through the Twelve Principles of Green Engineering,” Environmental Science and Technology 37 94A 101A 2003
- McDonough, W. Braungart, M. Anastas, P.T. Zimmerman, J.B. “Applying the Principles of Green Engineering to Cradle-to-Cradle Design.” Environmental Science and Technology 37 23 434A 441A 2003
- Mihelcic, J. Ramaswami, A. Zimmerman, J. “Integrating Developed and Developing World Knowledge into Global Discussions and Strategies for Sustainability,” Environmental Science and Technology 2005