This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Filtration Technology Challenges for Common-Rail Diesel Engine Fuel Systems
ISSN: 0148-7191, e-ISSN: 2688-3627
Published April 20, 2009 by SAE International in United States
Annotation ability available
The focus of this study was to determine the role of liquid filtration in controlling debris in fuel and maintaining common-rail fuel system life for off-highway diesel engine applications. Three key areas of filtration design surfaced as most important areas of focus – basic filtration efficiency, robustness of filter manufacturing, and filter assembly cleanliness from production (before and during installation into fuel system). The study also revealed the importance of designing fuel filtration systems consisting of primary filtration (suction-side water separation and particulate filtration) combined with pressure-side particulate filtration. The performance characteristics of the filtration system as a whole were found to be extremely critical in optimum fuel system performance and life goals, especially in severe-duty applications.
The study analyzed two filter systems – the Control System that consisted of pre-common-rail technology and the Proposed System that included all of the improvements designed to adequately protect the fuel system. The Control System consisted of B20(c) = 75 primary filtration and B8(c) = 75 secondary filtration. The results of the study recommended the Proposed System consist of B10(c) = 75 primary filtration and B4(c) = 200 secondary filtration. This system improved fuel system life by 20× in normal applications and nearly 10× in heavy-duty applications.
Several test methods were used to generate data including the multipass test (ISO 4548-12), fabrication integrity (ISO 2942) test, and specially developed production cleanliness and fuel system simulation tests. The study examined the adequacy of existing filtration technology in protecting common-rail fuel systems (benchmarking) and determined acceptable design requirements in the previously mentioned areas for individual fuel filters (pressure-side filtration) and filter systems (combining suction-side and pressure-side filtration).
CitationSalvador, C., "Filtration Technology Challenges for Common-Rail Diesel Engine Fuel Systems," SAE Technical Paper 2009-01-0874, 2009, https://doi.org/10.4271/2009-01-0874.
- Hydraulic Fluid Power – Filter Elements – Verification of Fabrication Integrity and Determination of the First Bubble Point ISO 2942 2004 2004
- Hydraulic Fluid Power – Fluids – Method for Coding the Level of Contamination by Solid Particles ISO 4406 1999 1999
- Methods of Test for Full Flow Lubricating Oil Filters for Internal Combustion Engines – Part 12: Filtration Efficiency Using Particle Counting and Contamination Retention Capacity ISO 4848-12 2000 2000
- Road Vehicles – Test Dust for Filter Evaluation – Part 1: Arizona Test Dust ISO 12103-1 1997 1997