This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Model Predictive Control Approach for AFR Control during Lean NOx Trap Regenerations
References
- Theis J. Gulari, E. “A LNT+SCR System for Treating the NOx Emissions from a Diesel Engine,” SAE Paper 2006-01-0210 2006
- Wang, J. “Smooth In-Cylinder Lean-Rich Combustion Switching Control for Diesel Engine Exhaust-Treatment System Regenerations,” SAE Int. J. Passeng. Cars – Electron. Electr. Syst. 1 1 340 348 2008
- Nakagawa, S. Hori, T. Nagano, M. “A New Feedback Control of a Lean NOx Trap Catalyst” SAE paper 2004-01-0527
- Sunohara, D. Kohketsu, S. Nakayama, S. Tanabe, K. Murata, M. Miyamoto, S. “Control of Rich Spike with Adaptive Estimation of Stored NOx in Lean NOx Trap for a Diesel Engine” SAE paper 2005-01-1090
- Sun, J. Kim, Y. W. Wang, L. “Aftertreatment Control and Adaption for Automotive Lean Burn Engines with HEGO Sensors” International Journal of Adaptive and Signal Processing 18 145 166 2004
- Ketfi, A. Wissel, D. V. Beurtheym S. Sorine, M. “Modeling and Control of a NOx Trap Catalyst” SAE paper 2000-01-1199
- He, Y. “Development of an Integrated Diesel Exhaust Aftertreatment Simulation Tool with Applications in Aftertreatment System Architecture Design
- Kim, Y. Sun, J. Kolmanovsky, I. Koncsol, J. “A Phenomenological Control Oriented Lean NOx Trap Model” SAE paper 2003-01-1164
- Aswani, D. J. Nieuwstadt, M. J. Cook, J. A. Grizzle, J. W. “Control Oriented Modeling of a Diesel Active Lean NOx Catalyst Aftertreatment System” ASME Journal of Dynamic Systems Measurement and Control 127 No. 1 1 12 2005
- Kang, J. Kolmanovsky, I. Grizzle, J. W. “Dynamic Optimization of Lean Burn Engine Aftertreatment” ASME Journal of Dynamic Systems Measurement and Control 123 No. 2 153 160 Jun. 2001
- Canova, M. Midlam-Mohler, S. Soliman, A. Guezennec, Y. Rizzoni, G. “Control-Oriented Modeling of NOx Aftertreatment Systems” SAE paper 2007-24-0106
- Pisu, P. Canova, M. Soliman, A. “Model-Based Fault Diagnosis of a NOx Aftertreatment System” proceeding of the 17 th IFAC Korea 2008
- Arnettm M. Bayer, K. Coburn, C. Guezzenec, Y. Koprubasi, K. Mudlam-Mohler, S. Sevel, K. Shakiba-Herfeh, M. Rizzoni, G. “Cleaner Diesel Using Model-Based Design and Advanced Aftertreatment in a Student Competition Vehicle” SAE paper 2008-01-0868
- Findeisen R, Allgower, F. “An Introduction to Nonlinear Model Predictive Control” 21 st Benelux Meeting on System and Control Veldhoven 2002
- Allgower F. Zheng, A. “Nonlinear Model Predictive Control” Btikhauser Verlag Basel 2000
- Zhu Y. Ozguner, U. “Constrained Model Predictive Control for Nonholonomic Vehicle Regulation Problem” proceeding of the 17 th IFAC Korea 2008
- Choi, I. Zou, Z. Midlam-Mohler, S. Soliman, A. Rizzoni, G. “ Modeling and Diagnostics of NOx Aftertreatment System ” Proceedings of FISITA World Automotive Congress 2006
- Heywood, J. “ Internal Combustion Engines Fundamentals ” McGraw-Hill 1988
- Brandt, E. Wang, Y. Grizzle, J. “Dynamic Modeling of a Three-Way Catalyst for SI Engine Exhaust Emission Control ” IEEE Transactions on Control System Technology 8 No. 5 2000
- Midlam-Mohler, S. Guezennec, Y. “ A Temperature Based Technique for Temporally and Spatially Resolved Lean NOx Trap Catalyst NOx Measurements ” Proceedings of the ASME International Mechanical Engineering Congress and Exposition 2006
- Hepburn, J. Thanasiu, E. Dobson, D. Watkins, W. “Experimental and Modeling Investigations of NOx Trap Performance” SAE Technical Paper 962051
- Midlam-Mohler, S. Guezennec, Y. “ Design, Modeling and Validation of a Flame Reformer for LNT External By-pass Regeneration ” SAE Technical Paper 2006-06-1367 2006
- Midlam-Mohler, S. Guezennec, Y. “Regeneration Control for a Bypass-Regeneration Lean NOx Trap System” Proceedings of the American Control Conference 2006