This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study of Gasoline-Alcohol Blended Fuels in an Advanced Turbocharged DISI Engine
Journal Article
2009-01-0138
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Cairns, A., Stansfield, P., Fraser, N., Blaxill, H. et al., "A Study of Gasoline-Alcohol Blended Fuels in an Advanced Turbocharged DISI Engine," SAE Int. J. Fuels Lubr. 2(1):41-57, 2009, https://doi.org/10.4271/2009-01-0138.
Language:
English
References
- Louis, J.J.J. “Well-To-Wheel Energy Use and Greenhouse Gas Emissions for Various Vehicle Technologies” SAE Paper 2001-01-1343 2001
- White, T.L. “Alcohol as a Fuel for the Automobile Motor” SAE Paper No. 070002 1902
- Schelp, H. “Alcohol Blends in Gasoline” SAE Paper No. 360058 1936
- Porter, J.C. “Alcohol as a High Octane Fuel”, 510086, (” 1951
- Kremer, F.G. Fachetti, A. “Alcohol as Automotive Fuel – Brazilian Experience” SAE Paper No. 2000-01-1965 2000
- West, B.H. Lopez, A.J. Theiss, T.J. Graves, R.L. Storey, J.M. Lewis, S.A. “Fuel Economy and Emissions of the Ethanol-Optimised Saab 9-5 BioPower” SAE Paper No. 2007-01-3994 2007
- Griffin, W.M. Lave, L.B. MacLean, H.L. “Promise and Cost of Cellulosic Ethanol for the U.S. Light-Duty Fleet” SAE Paper No. 2001-01-2474 2001
- Dohmel, K. “Future Mobility from a Fuels Perspective”, 29 Internationales Wiener Motorensymposium, (” 2008
- Turner, J.W.G. Pearson, R.J. Holland, B. Peck, A. “Development of a High Performance Sports Car for Operation on a High Alcohol-Blend Fuel” JSAE Paper No. 20075038 2007
- Kar, K. Last, T. Haywood, C. Raine, R. “Measurement of Vapor Pressures and Enthalpies of Vaporisation of Gasoline and Ethanol Blends and Their Effects on Mixture Preparation in an SI Engine,” SAE Int. J. Fuels Lubr. 1 1 132 134 2008
- Menrad, H. Bernhardt, W. Decker, G. “Methanol Vehicles of Volkswagen – A Contribution to Better Air Quality” SAE Paper No. 881196 1988
- Suga, T. Hamazaki, Y. “Development of Honda Flexible Fuel Vehicle” SAE Paper No. 922276 1992
- Cowart, J.S. Boruta, W.E. Dalton, J.D. Dona, R.F. Rivard, F.L. Furby, R.S. Piontkowski, J.A. Seiter, R.E. Takai, R.M. “Powertrain Development of the 1996 Ford Flexible Fuel Taurus” SAE Paper No. 952751 1995
- Nakajima, S. Saiki, R. Goryozono, Y. “Development of an Engine for Flexible Fuel Vehicles (FFV)” SAE Paper No. 2007-01-3616 2007
- Bergström, K. Melin, S-A. Jones, C. “The New ECOTEC Turbo BioPower Engine from GM Powertrain – Utilising the Power of Natures resources”, 28 Internationales Wiener Motorensymposium, (” 2007
- Kapus, P. Fuerhapter, A. Fuchs, H. Fraidl, G.K. “Ethanol Direct Injection on Turbocharged SI Engines – Potential and Challenges” SAE Paper No. 2007-01-1408 2007
- Wirth, M. Mayerhofer, U. Piock, W.F. Fraidl, G.K. “Turbocharging the DI Gasoline Engine” SAE Paper 2000-01-0251 2000
- Fraser, N. Blaxill, H. “Engine Downsizing and the Application of Gasoline Direct Injection to a High Specific Output Turbocharged Engine”, IMechE Fuel Economy and Engine Downsizing Conference, London, (” 2004
- Lang, O. Geiger, J. Habermann, K. Wittler, M. “Boosting and Direct Injection – Synergies for Future Gasoline Engines” SAE 2005-01-1144 2005
- Brewster, S. “Initial Development of a Turbocharged Direct Injection E100 Combustion System” SAE Paper No. 2007-01-3625 2007
- Brustle, C. Hemmerlein, N. “Exhaust gas turbocharged SI engines and their ability of meeting future demands” IMechE Paper No. C484/039/94 1994
- Grandin, B. Angstrom, H-E. Stalhammar, P. Olofsson, E. “Knock Suppression in a Turbocharged SI Engine by Using Cooled EGR” SAE paper No. 982476 1998
- Duchaussoy, Y. Lefebvre, A. Bonetto, R. “Dilution Interest on Turbocharged SI Engine Combustion” SAE Paper No. 2003-01-0629 2003
- Alger, T. Chauvet, T. Dimitrova, Z. “Synergies between High EGR Operation and GDI Systems,” SAE Int. J. Engines 1 1 101 114 2008
- Lake, T. Stokes, J. Murphy, R. Osborne, R. Schamel, A. “Turbocharging Concepts for Downsized DI Gasoline Engines” SAE Paper 2004-01-0036 2004
- Hiroshi, M. Makoto, M. Yuichi, O. Tetsunori, S. Shinji, K. “The Potential of Lean Boost Combustion” SAE Paper No. 2004-05-0417 2004
- Bergström, K. Nordin, H. Königstein, A. Marriot, C.D. Wiles, M.A. “ABC – Alcohol Based Combustion Engines – Challenges and Opportunities”, Aachener Kolloquium Fahrzeug- und Motorentechnik, (” 2007
- Taniguchi, S. Yoshida, K. Tsukasaki, Y. “Feasibility Study of Ethanol Applications to a DI Gasoline Engine” SAE 2007-01-2037 2007
- Rovai, F.F. Tanaka, D.K. Sinatora “Wear and Corrosion Evaluation of Electric Fuel Pumps with Ethanol/Gasoline Blends” SAE 2005-01-2196 2005
- Galante-Fox, J. Von Bacho, P. Notaro, C. Zizelman, J. “E-85 Fuel Corrosivity: Effects on Port Fuel Injector Durability Performance” SAE 2007-01-4072 2007
- Gautam, M. Martin, D.W. “Combustion Characteristics of Higher Alcohol/Gasoline Blends” Proc Instn Mech Engrs 214 2000
- Yacoub, Y. Bata, R. Gautam, M. “The Performance and Emission Characteristics of C 1 -C 5 Alcohol-Gasoline Blends with Matched Oxygen Content in a Single Cylinder Spark Ignition Engine” Proc Instn Mech Engrs 212 1998
- Bata, R.M. Elrod, C. Lewandowski, T.P. “Butanol as a Blending Agent for I.C. Engines” SAE Paper No. 890434 1989
- Malcolm, J.S. Aleiferis, P.G. Todd, A.R. Cairns, A. Hume, A. Blaxill, H. Hoffmann, H. Rueckauf, J. “A Study of Alcohol Blended Fuels in a New Optical Spark Ignition Engine” IMechE Performance, Fuel Economy and Emissions Conference, London 2007
- Cairns, A. Irlam, G. Blaxill, H. “Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine” SAE Paper No. 2006-01-0047 2006
- Cairns, A. Fraser, N. Blaxill, H. “Pre versus Post Compressor Supply of Cooled EGR for Full Load Fuel Economy in Turbocharged Gasoline Engines” SAE Paper No. 2008-01-0425 2008
- Gülder, Ö.L. “Burning Velocities of Ethanol-Isooctane Blends” Combustion and Flame 56 261 168 1984
- Crawford, A. Ellis, G. Fraser, N. Steeples, B. Kollin, K. “Combining High Performance with Euro IV Capability in a NA Production Engine” SAE Paper No. 2002-01-0335 2002