This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Analysis of the Surface Integrity in Milling of AISI P20 Steel
Technical Paper
2008-36-0240
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The milling is one of the machining processes with greater employment in the today's industry, because of some aspects such as high rate of material removal and production of workpiece with surface and dimensional accuracy, as well as being a process of high flexibility, being used in the manufacture of flat surfaces, contours, slots and cavities, among others. Among the possible variations of the milling process, one of which has increased employment in the sectors of tooling is currently the top milling. The quality of the machined piece surface depends mainly on the geometry of the tool, of the cutting conditions and of the dynamic behavior of the machine tool. Were conducted tests showing a comparison of the integrity of the machined workpiece surface, with high-speed-steel HSS M2 mills, coated with titanium nitride (TiN), in the machining with minimal quantity of lubricant (MQL). The cut parameter varied was the axial depth of cut (ap), where were used 0.4 and 0.8 mm. The cutting speed was kept constant at 30 m/min. Thus, the objective of this study was to evaluate the surface quality for these cutting conditions.
Authors
- Rodrigo Panosso Zeilmann - Machining Group, Dept. Mechanical Engineering, University of Caxias do Sul Caxias do Sul, Brazil
- Alfredo Tomé - Machining Group, Dept. Mechanical Engineering, University of Caxias do Sul Caxias do Sul, Brazil
- Anderson Antonioli - Machining Group, Dept. Mechanical Engineering, University of Caxias do Sul Caxias do Sul, Brazil
- Diego Carlos Calza - Machining Group, Dept. Mechanical Engineering, University of Caxias do Sul Caxias do Sul, Brazil
- Marcus Vinicius R. Braghini - Machining Group, Dept. Mechanical Engineering, University of Caxias do Sul Caxias do Sul, Brazil
Citation
Zeilmann, R., Tomé, A., Antonioli, A., Calza, D. et al., "Analysis of the Surface Integrity in Milling of AISI P20 Steel," SAE Technical Paper 2008-36-0240, 2008, https://doi.org/10.4271/2008-36-0240.Also In
References
- Ramos, C. A. D. Miranda, P. R. R. Barbosa, C. A. Machado, A. R. “Usinabilidade de um aço inoxidável martensítico no fresamento de topo” Revista Máquinas e Metais 174 187 2005
- Mesquita, R. A. Sokolowski, A. Barbosa, C. A. “Desenvolvimento de aços especiais com usinabilidade melhorada” Revista Máquinas e Metais 86 112 2003
- Hogmark, S. Jacobson, S. Larson, M. “Design and Evaluation in Tribological Coatings” Wear 246 20 33 2000
- Silva, M. M. Abrão, A. M. Coelho, R. T. Campos, W. R. C. “Integridade superficial de peças fresadas e retificadas” Revista Máquinas e Metais 136 151 2006
- Oliveira, J. M. “Caracterização da Integridade de Superfícies Usinadas Para Produção de Moldes e Matrizes” Tese de Mestrado Universidade de Caxias do Sul 2006
- Chen, J. S. Huang, Y. K. Chen, M. S. “A study of the surface scallop generating mechanism in the ball-end milling process” International Journal of Machine Tools & Manufacture 45 2005 1077 1084
- Zeilmann, R. P. Santin, R. Nicola, G. L. “Qualidade superficial em fresamento de topo toroidal” Revista Máquinas e Metais 152 159 outubro 2006
- Kamely M. A. Noordin, M. Y. “The effect of multiple pass cutting on surface integrity when hard turning of AISI D2 cold work tool steel” International Journal of Precision Technology 1 1 2007
- Santos, S. C. Sales, W. F. “Aspectos Tribológicos da Usinagem dos Materiais” 2007