This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Predicting Ignition delay and HC emission for DI diesel engine encompassing EGR and Oxygenated fuels
Technical Paper
2008-28-0050
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Estimation of the ignition delay and concentration of exhaust emissions carries great importance in engine development process. In direct injection (DI) diesel engines, ignition delay has direct effect on startability, noise and pollutant formation. Hydrocarbon (HC) emissions are mainly due to the unburnt or partially burnt fuel leaving the engine exhaust system. In the present work, correlations have been developed for ignition delay and HC emissions. Satisfactory comparison of predicted and experimental values of ignition delay and HC emission under different operating conditions for various engines, widely varying in dimensions, method of aspiration and rated speeds validated the correlations. These correlations are useful as design tools for engine development.
Recommended Content
Authors
Topic
Citation
Aghav, Y., Thatte, V., Kumar, M., Lakshminarayanan, P. et al., "Predicting Ignition delay and HC emission for DI diesel engine encompassing EGR and Oxygenated fuels," SAE Technical Paper 2008-28-0050, 2008, https://doi.org/10.4271/2008-28-0050.Also In
References
- Lakshminarayanan, P A Aghav, Y V Dani, A D Mehta P S “Accurate prediction of the rate of heat release in a modern direct injection diesel engine” 216 Journal of Automobile 2002
- Wolfer, H H “Ignition Lag in Diesel Engines,” VDI-Forschungsheft 392 Aug. 1959 1938
- Kadota, T Hiroyasu, H Oya, H “Spontaneous Ignition Delay of a Fuel Droplet in High Pressure High Temperature Gaseous Environments,” Bull. JSME 19∼130 437 445 1976
- Lahiri, D Mehta, P Poola, R Sekar, R “Utilization of Oxygen-Enriched Air in Diesel Engines: Fundamental Considerations,” Paper No. 97-ICE-72 New York 1997
- Watson, N. Pilley, A. D. Marzouk, M. “A Combustion Correlation for Diesel Engine Simulation” SAE 800029 1980
- Hardenberg, H O Hase, F W “An Empirical Formula for Computing the Pressure Rise Delay of a Fuel From Its Cetane Number and From the Relevant Parameters of Direct-Injection Diesel Engines,” SAE 790493 1979
- Chandorkar, S B Dani, A D Lakshminarayanan, P A “Effects of injection parameters, fuel quality and ambient on the ignition delay and the location of the flame Kernel in a diesel spray in a quiescent chamber” SAE 881227 1988
- Assanis Dennis N. Filipi Zoran S. Fiveland Scott B. Syrimis Michalis “A Predictive Ignition Delay Correlation Under Steady-State and Transient Operation of a Direct Injection Diesel Engine” ASME-ICE Fall Technical Conference 1999
- Greeves, G Khan, I M Wang, C T H Fenne, I “Origins of Hydrocarbon emissions from diesel engines” SAE 770259 1977
- Yu, R C Wong, V W Shahed, S M “Sources of Hydrocarbon emissions from direct injection diesel engines” SAE 800048 1980
- Lakshminarayanan, P A Nayak, N Dingre, S V Dani, A D “Predicting Hydrocarbon Emissions From Direct Injection Diesel Engine” ASME paper 124 July 2002
- Huang Zuoha Lu Hongbing Jiang Deming Zeng Ke Liu Bing Zhang Junqiang Wang Xibin “Combustion behaviors of a compression-ignition engine fuelled with diesel/methanol blends under various fuel delivery advance angles” 331 341 95 Bio-resource technology 2004
- Szybist James P. Boehman André L. Taylor Joshua D. McCormick Robert L. “Evaluation of formulation strategies to eliminate the biodiesel NOx effect” 1109 112 10 86 Fuel Processing Technology June 2005