Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Characteristics of Hybrid Fibre-Composites Boards for Potential Structural Application

Journal Article
2008-01-2724
ISSN: 1946-391X, e-ISSN: 1946-3928
DOI: https://doi.org/10.4271/2008-01-2724
Published October 07, 2008 by SAE International in United States
Characteristics of Hybrid Fibre-Composites Boards for Potential Structural Application
Citation: Panigrahi, S., Oraji, R., Arachilage, K., Kushwaha, R. et al., "Characteristics of Hybrid Fibre-Composites Boards for Potential Structural Application," SAE Int. J. Commer. Veh. 1(1):553-559, 2009, https://doi.org/10.4271/2008-01-2724.
Language: English

References

  1. Dash, B.N. Rana, A.K. Mishra, H.K. Nayak, S.K Mishra, S. C. Tripathy, S.S. 2000 Novel low-cost jute-polyester composites:III- Weathering and Thermal Behaviour J. Appl. Polm. Sci. 78 9 1671 1679
  2. Hughes, M. Hill, C.A.S. Hague, J.R.B. 2000 The Fracture Toughness of Bast Fibre reinforced Polyester Composites: Part 1- Evaluation and Analysis J. mat. Sci. 37 21 4669 4676
  3. Mwaikambo, L.Y. Ansell, M.P. 2002 Chemical Modification of Hemp, Sisal, jute and Kapok Fibres by Alkalization J. Appl. Polm. Sci. 84 12 2222 2234
  4. Aquino, E.M.F. Sarmento L.P.S. Oliveira W. 2007 Moisture effect on degradation of jute/glass hybrid composites Journal of Reinforced plastics and Composites 26 219 233
  5. Rodriguez, E. Petrucci R. Puglia D. Kenny J.M. Vazquez A. 2004 Characterization of composites based on natural and glass fibres obtained by vacuum infusion Journal of Composite Materials 39 265 282
  6. Nixon, J.A. 2000 Vacuum infusion: cost-effective closed mould processing to meet the challenges of the styrene issue Integrated design and manufacture using fibre-reinforced polymeric composites Owen, M.J Middleton, V. Jones I.A. 125 139 Cambridge, England Woodhead publishing limited
  7. Williams, C. Summerscales J. Grove S. 1995 Resin infusion under flexible tooling (RIFT): a review Composites Part A 27 517 524
  8. Hammami, A. 2001 Effect of reinforcement structure on behavior in the vacuum infusion compaction process Polymer Composites 22 3 337 348
  9. Li, X. Tabil L.G. Panigrahi S. 2007 Chemical treatments of natural fiber for use in natural fiber-reinforced composites: A review Journal of Polymers and the Environment 15 25 33
  10. Wang, B. Panigrahi S. Tabil L.G. Crerar W. 2007 Pre-treatment of flax fibers for use in rotationally molded biocomposites Journal of Reinforced Composites 26 5 447 463
  11. Andersson, H. M. Lundstrom' T. S. Gebafu B. R. Langstrom R. 2002 Flow-enhancing layers in the vacuum infusion process Polymer Composites 23 5 895 901
  12. Modi, D. Correia N. Johnson M. Long A. Rudd C. Robitaille F. 2006 Active control of the vacuum infusion process Composites Part: Applied Science and manufacturing 38 2007 1271 1287
  13. Owen, M.J. 2000 Fibres for Thermosetting FRP Integrated design and manufacture using fibre-reinforced polymeric composites Owen, M.J Middleton, V. Jones I.A. 15 29 Cambridge, England Woodhead publishing limited
  14. Panigrahi, S. Barghout K. Fung J. Crerar B. 2006 Conversion of Saskatchewan flax and SARCAN plastic waste into flaxtic and flaxtic-binder Saskatoon, Canada Department of Agricultural and Bioresource Engineering, University of Saskatchewan
  15. Owen, M.J. 2000 Thermosetting resins Integrated design and manufacture using fibre-reinforced polymeric composites Owen, M.J Middleton, V. Jones I.A. 30 46 Cambridge, England Woodhead publishing limited
  16. Rodriguez, E. Alvarez V. A. Moran J Moreno S. Petrucci R. Kenny J.M. Vazquez A. 2004 Mechanical properties evaluation of a recycled flax fibre-reinforced vinyl ester Journal of Composite Materials 40 245 256

Cited By